-
SCG-W3000 Chemiluminescence Imaging System
*Sale price valid for display unit only, while stock last
I. Introduction
SCG-W3000 is an imaging device that utilizes chemiluminescence technology and is equipped with a high-sensitivity cooled camera with 9 million pixels. It enables fast, accurate, and high-throughput detection and imaging of samples, and is widely used in fields such as life sciences, medicine, and environmental protection.
II. Features
Real-time Imaging: Present the changes in sample signals during the exposure process in real-time, capturing every detail of the shot. Overexposed areas will be indicated for samples that are overexposed.Time Imaging: After the exposure is completed, every frame image within the exposure time can be generated. Through precise retrospective adjustments, users can select any frame image within that exposure time as the final output.
Time Accumulation: For samples with insufficient exposure, users can choose to continue the exposure after the exposure ends, allowing the sample to obtain additional exposure effects based on the exposure time already accumulated.
Automatic Exposure: Intelligent exposure technology can quickly determine the optimal exposure time. With the functions of time imaging and time accumulation, users can obtain the best image results with just one operation.
-
SWE-FP Tissue Homogenizer Low Temperature (-50℃, Freezing Table)
*Sale price valid for display unit only, while stock last
Product Introduction
SWE-FP is a newly upgraded low-temperature homogenizer, which can reach a temperature as low as -50℃ in the chamber and also equipped with a freezing table.Adopt high-speed reciprocating motion of the vertical shaking system, the frozen sample in the grinding tube collides with the grinding bead, and the resulting grinding shear force and impact force completely break down the tissue. Up to 192 samples can be processed simultaneously in one minute, making it a dedicated device that meets the requirements of rapid processing of multi-sample.
Product Features
1. Slider drive, no wear shaft, noise stability and durability;
2. Equiped with low temperature freezing table. It can meet the needs of sample storage, electrophoresis, membrane transfer and other low-temperature experiments
3. Imported compressor,lowest cooling temperature of -50℃,low temperature grinding throughout the process,reducing degradation of proteins and RNA.
4. Up to 192 samples can be processed simultaneously in 1 minute (24 samples can be processed with standard),efficiently and effectively completing sample grinding with high throughput.
5. Multiple adapters to choose. -
SZY-2L Vacuum Aspirator
*Sale price valid for display unit only, while stock last
Product Introduction
The vacuum aspirator can collect and store various liquids. The objects of use include various cell culture dishes, test tube orifice plates and even experimental desktops to ensure the safety and tidiness of the laboratory.
Product Features
1. The built-in battery is convenient to bring into the sterile operating table；
2. The connection can be automatically closed when the collection bottle is full to prevent overflow；
3. Quick-connect fittings ensure secure installation of tubes and collection bottles；
4. Two control methods can control the suction by foot pedal and knob. -
SMB-PC Dry Bath (Programmable, Heating, Cooling)
*Sale price valid for display unit only, while stock last
Product Description:
This product is an advanced microcomputer-controlled dry bath incubator with a wide selection of metal blocks suitable for various test tubes, which can be widely used for sample preservation, enzymes preservation and reaction, pre-denaturation of DNA amplification and electrophoresis, serum coagulation, etc.
Normal Working Conditions:
Ambient temperature: 10°C~ 30°C
Relative humidity: ≤ 70%
Input power: AC100 ~ 240
AC frequency: 50 Hz/60 Hz
Output power: 24 V 6.25 A 150 W
Note: Before using the instrument, please confirm whether the working conditions meet the above requirements -
SMV-P Vertial Vortex Mixer
*Sale price valid for display unit only, while stock last
Product Introduction
The vertical mixer is suitable for general mixing scenarios in industries such as biology, medicine, and chemicals.
However, it is not recommended for use in cold storage.
Product Features
Rotaryoperation,gentle and thorough mixing
Adjustable speed range:10-80rpm
Accuratespeed control
Low noise
Various sizes of adapters can be freely combined, suitable for 1.5mL,2.0mL,5mL, 10mL, 15ml,and 50ml centrifuge tubes
Memoryfunction: The startup parameters are set to thelast settings before shutdown -
SMV-R Rotary Vortex Mixer
*Sale price valid for display unit only, while stock last
Product Introduction
The rotary mixer is suitable for conventional mixing scenarios in industries such as biology, medicine, and chemical engineering. However, it is not recommended for use in a cold storage.
Product Features
Rotary operation for gentle and thorough mixing
Adjustable angle range: 0-90 for single-layer adapter, 50°-90° double-layer adapter
Adjustable speed range: 0-80rpm
Accurate speed
Low noise
Multiple specifications of clips can be freely combined, suitable for 1.5mL, 2.0mL, 5mL, 10mL, 15mL, and 50mL centrifuge tubes
Memory function: the parameters at startup are the same as the last settings before the last shutdown -
SMV-4500B Vortex Mixer (Digital display,button)
*Sale price valid for display unit only, while stock last
Product Description
SMV vortex mixers series are used in the fields of life science, andphysical& chemical analysis for oscillation, mixing and stirring of sample tissues, cells, bacterialliquid, chemical reagents, etc.The vortex mixer has a variety of adapters suitable for 0.2mL~50mL centrifuge tubes, microplates, etc.
Features
1. Accurate point recognition of pressure sensor
2. Zero silicone foot mat, super shock proof, suitable for high-speed work
3. Adjustable speed, wide range setting ofspeed
4. A variety of vibration module adapters are available
5. Equiped with brushless motor longer lifespan and more durable -
SMS-200A Magnetic Stirrer (Heating)
*Sale price valid for display unit only, while stock last
Product Information
The magnetic stirrer is a laboratory instrument used for liquid mixing, mainly for stirring or simultaneously heating and stirring low-viscosity liquids or solid-liquid mixtures. Its basic principle is to use the principle of same-sex repulsion and opposite-sex attraction of the magnetic field to push the magnetically placed stir bar in the container to perform circular motion, thereby achieving the purpose of stirring the liquid. With the heating temperature control system, it can heat and control the sample temperature according to specific experimental requirements, maintain the required temperature conditions for experimental conditions, and ensure that the liquid mixing meets the experimental requirements.
Product Features
1. 10L stirring volume, increased magnetic force.
2. Equipped with heating temperature control system, heating and controlling sample temperature, with high temperature control accuracy.
3. Automatic and manual modes. Automatic search for stir bar.
4. Intelligent anti-jumping stir bar, it will automatically restart after the stir bar jumps.
5. LCD display, intuitive and clear, easy to operate.
6. .The side of the instrument can absorb the stir bar, which can avoid the stir bar from being lost frequently
7. Anti-collision, anti-scalding design, flame-retardant materials for safer use. -
SMP-2 Microplate Centrifuge (for PCR plate)
*Sale price valid for display unit only, while stock last
Product Description
Microplate centrifuge is a transient centrifuge specially designed for 96-well plates, which is convenient for separating the droplets hanging on the wall. The microplates are vertically loaded into the centrifuge cavity from the top slot of the centrifuge, and the liquid is kept at the bottom of the microplates under the action of surface tension, so there is no need to worry about leakage. Close the top cover of the centrifuge, and the rotor will be accelerated to 2200 rpm instantaneously.
Product Features
1. Can take 2 microplates at the same time without manual rotation.
2. The motor actively brakes to achieve a slow stop within 10s.
3. Inductive switch, stop when the door is opened. Can be operated with one hand
4. Bottom plate counterweight, lower center of gravity, no vibration when starting, more stable operation. -
SMC-5000F Mini Centrifuge
*Sale price valid for display unit only, while stock last
Product Description
This product is a new generation of mini centrifuge, the overall skeleton surface shape, novel and simple appearance. One-piece composite rotor, compatible with multi-channel and multi-standard centrifuge tubes. It has the function of stopping immediately after opening the cover, and the unique stop speed adjustment function can realize the free switching betweenemergency stop and slow stop, which can be widely used in the separation experiment of trace samples.
Features
1. Composite rotor, can centrifuge 0.1 mL, 0.2 mL, 8-stip tube, 0.5 mL, 1.5 mL, and 2 mL EP tube at the same time.
2. The speed is 5000 rpm, and the centrifugal force is 1700 g, with anti-skid and idling protection
3. There are two stop modes to choose from: opening the cover for emergency stop and slow stop, meeting the needs of different applications
4. Equipped with a brushless motor with long service life. -
DS-3D100 Multi-functional Shaker (Horizontal + Pendulum+ 3D)
*Sale price valid for display unit only, while stock last
Product Introduction
Shakers are commonly used in Western experiments such as blocking of blotting membranes, antibody incubation, washing, fixation, staining, and destaining of electrophoretic gels; they can also be used for shaking liquids in various centrifuge tubes, multi-well plates, petri dishes, and culture bottles. Mix well. The movement modes are horizontal, pendulum and three-dimensional composite, and the Servicebio shaker is equipped with LCD display, knob-type control keys and digital timing function.
Product advantages
1.Three independent modes: swing, horizontal, and 3D. In 3D mode, the mixing intensity can be set separately.
2.Automatically stops in a horizontal position after operation. Timer and power-off memory function.
3..Equipped with a stepper motor for precise speed control and long lifespan.
4.Large tray and large LCD screen for easy operation.
5.Rust-proof treatment on the base plate for durability. -
SVT-2 Electrophoresis System (Transfer)
*Sale price valid for display unit only, while stock last
Product introduction
This product can be used with SVE-2 vertical electrophoresis. The electric field is used to transfer the proteins, nucleic acids, etc. in the gel after electrophoresis to the transfer membrane, and then the charged particles are further analyzed and studied by means of biochemical analysis.
Product Features
a. Double plate structure, can be used with SVE-2 electrophoresistank.
b. The tank of the instrument is integrated injection molding with high transparency polycarbonate, it’s corrosion resistance, high transparency, consistent performance, etc..
c. The positive and negative electrodes of the transfer clip are distinct, with a handle function, which is easy to operate.
d. High transfer efficiency, transfer time is about 20-40min.
e. Strong structure can be synchronized with the ice bath cooling to avoid interference caused by overheating, so as to ensure reliable experimental results. -
SVE-2 Electrophoresis System (Vertical)
*Sale price valid for display unit only, while stock last
1.Product overview
Electrophoresis technology is widely used in biological research, analytical chemistry, clinical chemistry, toxicology, pharmacology, immunology, food chemistry and other fields.
In a DC electric field, the phenomenon in which charged particles move toward electrodes with opposite signs is called electrophoresis. Small molecules can be separated and analyzed by electrophoresis, and electrophoresis is commonly used in modern medicine to study proteins, nucleic acids, enzymes and even virus cells.
Electrophoresis can not only be used for protein separation and content determination, but also has many new applications in immunological experiments. For example: Hepatitis B antigen (HBAg) electrophoresis assay for the diagnosis of hepatitis B, alpha-fetoprotein (AFP) electrophoresis assay for the diagnosis of primary liver cancer, etc.
2. Product Features
a. Using the in-situ gel-making mode, the gel-making and running process can be completed without disassembling and assembling the electrophoresis glass, and it is compatible with the running and electrophoresis requirements of the pre-cast gel products of this model.
b. The glue base is specially designed and locked by non-spring buckles to avoid glue leakage caused by insufficient spring pressure or aging.
c. The uniquely designed card plate is matched with the whole gland, so that the glass plate can be sealed by squeezing the sealing strip, avoiding the phenomenon of liquid leakage due to the side card not being lifted in place.
d. It can be adapted to glass plates and glue-making combs with various thickness intervals (1.5mm, 1mm , 0.75mm) to meet the needs of different sample volumes.
e. This electrophoresis instrument requires less electrophoresis buffer, and a minimum of 300mL can complete electrophoresis experiments.
f. Can be used with SVT-2 transfer electrophoresistank.. -
SVL-2 Integrated Horizontal Electrophoresis System（Electrophoresis Tank + blue light transilluminator)
*Sale price valid for display unit only, while stock last
ProductOverview
SVL-2 integrated horizontal electrophoresis instrument is mainly used for rapid agarose electrophoresis separation experiments of small amounts of DNA and RNA samples.
Product Features
1. The gel maker mold is integrally formed, which can make four different sizes ofgel blocks.
2. Standard blue light transilluminator, with SPW-6S electrophoresis power supply, can directly observe the band during the electrophoresis process.
3. The transparent upper cover has a hole design, which is convenient for heat dissipation and observation.
4. Card slot limit function, accurate operation.
5. The electrode holder and electrode head are detachable, which is convenient for cleaning and maintenance. -
SPW-DSE Electrophoresis Power Supply (Dual Module, Programmable)
*Sale price valid for display unit only, while stock last
Product Introduction
This product is a rectifier that converts alternating current into direct current. It can convert alternating current into controllable constant voltage and constant current direct current to meet the needs of electrophoresis and other experimental production. It is widely used in biology, medicine and other fields, such as nucleic acid gel electrophoresis, Protein gel electrophoresis, Western Blot protein transfer and other experiments.
Product Features
1. Completely independent dual outputs, with the ability to set parameters separately.
2. Programmable function, capable of setting four working modes: constant voltage, constant current, voltage gradient, and current gradient.
3. Additional two sets of 12V outputs, suitable for use with blue light illuminator, gel loading lamps, and can be controlled separately.
4. Equippend with multiple abnormality alerts, including overvoltage, overcurrent, overload, variable load, and no load. -
8-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-B10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-B300: Volume Range: 50-300 μL, Increment: 1 μL
•SPIP-B1000: Volume Range: 100-1000 μL, Increment: 5 μL -
Single-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-2.5: Volume Range: 0.1-2.5 μL, Increment: 0.05 μL
•SPIP-10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-20: Volume Range: 2-20 μL, Increment: 0.1 μL
•SPIP-100: Volume Range: 10-100 μL, Increment: 1 μL
•SPIP-200: Volume Range: 20-200 μL, Increment: 1 μL
•SPIP-1000: Volume Range: 100-1000 μL, Increment: 5 μL
•SPIP-5000: Volume Range: 1000-5000 μL, Increment: 50 μL
•SPIP-10000: Volume Range: 1-10 mL, Increment: 100 μL -
SDB-2: POWDER DOSING SYSTEM LARGE
The bench-top automatic Solids Dispenser SDB-2 is a highly precise and repeatable dosing solution designed for dispensing calibrated volumetric doses of powders. It offers larger dose sizes and a bigger reservoir compared to the SDB-1.
The SDB-2 significantly enhances lab productivity while ensuring process accuracy. It boasts fast volumetric solids dispensing, taking only 2.5-3.5 seconds per dose. Its compact benchtop configuration allows for easy integration into existing workflows, reducing repetitive tasks.
Interchangeable dispensing heads enable quick processing of different materials with varying dose sizes, without the risk of cross-contamination and without requiring cleaning steps. The dispensing head of the SDB-2 is capable of dispensing from 20 mg up to 50 grams and even higher doses, as well as multiples thereof.
An LED display provides real-time feedback on the number of shots being dispensed. The SDB-2 is powered directly from the AC socket, with user-selectable voltage options of 115V or 230V.
Customized solutions, including automation options, are available to cater to specific requirements. -
SDB-1R Robotic Benchtop Powder Dispenser Module
To move to a higher level of automation we have now created a robotic module for our solid dispensers which converts them into benchtop automation solutions.
The SDB-1 solid dispenser integrated into the new Robotic Module can be deployed for automated dispensing in batch processing of wellplates as well as racks of microtubes or vials. The system is controlled from a touch screen controller in the front bezel. Different tube racks formats can be programmed. It can be retrofitted to existing SDB-1 dispensers.
This solution increases productivity by enabling “walk-away” time of lab operators and alleviates tedious repetitive tasks. One staff can operate a number of these robotic systems in parallel -
SDB-1 Benchtop Solid Dispenser
The bench-top automatic Solids Dispenser SDB-1 is a precise and repeatable dosing solution for powders in the laboratory. It significantly improves lab productivity while ensuring process accuracy. Volumetric solids dispensing with the SDB-1 is particularly fast, taking only 2.5-3.5 seconds per dose. Its compact benchtop design allows for easy integration into existing workflows, reducing repetitive tasks.
The SDB-1 features interchangeable dispensing heads, enabling quick processing of different materials without cross-contamination and eliminating the need for cleaning steps. The small dispensing head can dispense doses ranging from 5 mg to 250 mg in a single shot, with the option for incremental dispensing. The large dispensing head can handle doses from 5 mg up to 5 grams and multiples thereof. Additionally, there is a continuous mode available for processes like blending.
An LED display on the dispenser provides real-time feedback on the amount of powder being dispensed. The SDB-1 is powered directly from the AC socket, with user-selectable voltage options of 115V or 230V.
Customized solutions, including automation capabilities, are also available to meet specific requirements. -
SDH-1 Automatic Handheld Dispenser
The handheld Solids Dispenser SDH-1 is a compact and efficient device designed to dispense precise and repeatable doses of powders. It offers fast volumetric dispensing, taking only 2.5-3.5 seconds per dose. Its handheld configuration makes it easy to integrate into lab workflows, reducing tedious powder dosing tasks.
The SDH-1 features interchangeable dispensing heads, allowing for quick processing of different materials without the risk of cross-contamination. The device is lightweight and battery-operated, offering the convenience of freehand solids dosing. The LED display on the dispenser shows the dose increments being dispensed, ensuring accuracy.
To accommodate various dose volumes, the SDH-1 comes with 10 volumetric dispensing disks that cover a range of 2.5mm³ to 300mm³. Additional calibrated dispensing disks can be obtained for specific dose volumes, and a calibration certificate is provided for accuracy assurance.
For larger dose volumes of up to 700mm³, a mid-size dispensing head is available as an option. The SDH-1 can be charged from an AC power socket, supporting both 115V and 230V power sources. -
SDM-1 Manual Powder Dispenser
The manual Solids Dispenser SDM-1 offers precise and repeatable dispensing of calibrated volumetric doses of powders. It enhances lab productivity and ensures accurate solids/powder dosing. With its compact handheld design, it seamlessly integrates into workflows, reducing repetitive measuring tasks. The SDM-1 can be calibrated for dosing between 5 mg and 250 mg in a single dose, depending on the material.
-
MCF-13A Vial Capper for Screwing Caps on Microtubes or Centrifuge Tubes
The patented Microcapper MCF-13A automates the process of attaching screw caps to microtubes or vials in laboratories. It enhances lab productivity, occupational health and safety, and process integrity.
The MCF-13A ensures consistent torque for capping, preventing leakage during transportation. It reduces hand fatigue and eliminates the tedious task of manual capping, which can lead to conditions like carpal tunnel syndrome.
Designed for hands-free capping of 13mm microtubes used in labs for sample preparation and processing, the MCF-13A can be customized for various cap, vial, and microtube sizes. It is a compact, lightweight, and portable bench-top device with a small footprint.
Operating the MCF-13A is user-friendly and requires minimal training. Caps are poured into a feeder, and capping is done by inserting a microtube into the tube holder and pressing a button.
The Microcapper MCF-13A is a compact, AC-powered table-top device that plays a vital role in any capping process with screw caps. -
MCF-13 Tube Sealing Machine
The patented Microcapper MCF-13 automates the process of attaching screw caps to microtubes in laboratories. It improves lab productivity, occupational health and safety, and process integrity.
The MCF-13 ensures consistent tightening of caps to prevent leakage during transportation. It reduces operator hand fatigue and eliminates the tedious task of hand capping, which can lead to conditions like carpal tunnel syndrome.
Designed for 13mm tubes commonly used in labs for sample preparation and processing, the MCF-13 can be customized for different cap, vial, and tube sizes. It is a compact bench-top device with a portable design.
Operating the MCF-13 requires minimal training as caps are poured into a feeder and capping is done by inserting a microtube into the tube holder, pushing it to the capping position, and then lowering it with the attached cap. -
MCD-13 Microcapper and De-capper
The Microcapper MCD-13 is a compact, user-friendly device used for attaching screw caps to microtubes in laboratories. It ensures consistent tightening to prevent leakage and reduces hand fatigue. The MCD-13 works with various cap, vial, and tube sizes, promoting process integrity. It is easy to operate with minimal training, and it also includes a de-capping function.
-
PB-30 pH Meter
Measuring range of pH: -1.99 to 19.99
pH readability: 0.01
pH precision: ±0.005
Measuring range of mV (mV): -1999.9 to 1999.9
mV readability (mV): 0.1
mV precision (mV): ±0.3 mV (0.05%, if +400 mV)
Temperature range (°C): -5.0 to 105.0
Readability (°C): 0.1
Precision (°C): ±0.2
Calibration point: Max. 3 buffers
Automatic identification of buffers:
16 buffers
2, 4, 7, 10, 12
1, 3, 6, 8, 10, 13
1.68, 4.01, 6.86, 9.18, 12.46
Electrode calibration slope range: 90% – 105%
Temperature compensation: Automatic (ATC), manual (MTC)
Optional measurement units: pH, mV and RmV (relative mV value)
OPTIONAL ACCESSORIES:
-
PY-T02 Temperature Sensor
Temperature Sensor; Stainless Steel Body
-
-
PB-10 Standard pH Meter
Measuring range of pH: 0 to 14
pH readability: 0.01
pH precision: ±0.01
Measuring range of mV (mV): -1500.0~ to 1500.0
mV readability (mV): 0.1
mV precision (mV): ±0.4
Temperature range (°C): -5.0 to 105.0
Readability (°C): 0.1
Precision (°C): ±0.2
Calibration point: Max. 3 buffers
Automatic identification of buffers:
16 buffers
2, 4, 7, 10, 12
1, 3, 6, 8, 10, 13
1.68, 4.01, 6.86, 9.18, 12.46
Automatic temperature compensation (ATC): Yes
Display of electrode slope: Yes
Interface: BNC
Display screen: LCD
OPTIONAL ACCESSORIES:
