-
Winpact One Fermentation System [RESALE]
*Additional charge for installation/commissioning
*One Science does not handle the warranty for resale items
System consists of:
• Winpact One Fermentation System Controller
• 10L Single wall dish Bottom vessel
• Heating blanket for 10L single wall dish vessel
• Agitation Motor
• Temperature Probe for 10L Vessel
• Temperature Probe Cable
• Julabo EcoChiller/Compact Recirculating Cooler F250 -
Electric Heating Thermostatic Incubator [RESALE]
*Additional charge for installation/commissioning
*One Science does not handle the warranty for resale items
Incubator
for stability testing, lightly used -
Water purifier [RESALE]
*Additional charge for installation/commissioning
*One Science does not handle the warranty for resale items
water purifier
Customize the economical Thermo Scientific™ B-Pure™ laboratory-grade water system to meet your pretreatment or deionization application need -
Cryovessel [RESALE]
*Additional charge for installation/commissioning
*One Science does not handle the warranty for resale items
Economically store up to 4,000 samples that makes sample retrieval simple and consumes minimum liquid nitrogen. Compact design to minimize space requirements while maximizing storage capacity. Suited for both manual and computerized inventory record-keeping methods. Outstanding temperature uniformity: samples are stored below -180°C, even when less than 2 in. (5cm) of liquid nitrogen remains in the vessel.
Audible alarm that sounds when nitrogen level falls below safe range; dry remote alarm contact for remote monitoring. Advanced vacuum insulation to minimize liquid nitrogen evaporation and reduces operating costs. Secure locking to prevent unauthorized entry -
Rx-4 Automatic Tablet & Capsule Counter
- Meet the easy, accurate way to automatically count tablets and capsules. For any environment where efficiency matters, you can count on the Rx-4.
- Counting speed up to 500 pills per minute
- 3 modes: fill a single vial, fill multiple vials, or count inventory
- Compact design fits any countertop space
- Compatible with over 95% of tablets, capsules, and soft-gels
- 220VAC, 50/60 Hz, UK 3-Pin Type-G Electrical Plug
-
CRYSTAR NET TROLLEY 300KG 600X900MM CT-300APU (with mesh on 4 sides)
Made of plastic
Max load: 300kg
Wheel: 125mm
Dimension: L900xW600xH890mm
Net weight: 26kg
-
CRYSTAR PLASTIC FOLDABLE TROLLEY 300KG CT300 L900xW600xH890mm
CRYSTAR HD PLASTIC TROLLEY CT300
Strong structure design
Foldable handle to allow easy storage
Work well in well environment
Capacity: 300kg
Wheel: 125mm
Size: L900xW600xH890mm
Net weight: 17kg
-
LFH-2-2220V 780×620×1150mm Benchtop Ducted Fume Cupboard
A chemical fume hood (fumeA chemical fume hood (fume cupboard) is a specific type of air ventilation system equipped with powerful and energy-efficient fans and high-quality filtration media. cupboard) is a specific type of air ventilation system equipped with powerful and energy-efficient fans and high-quality filtration media.
-
1-1000mbar Touch-screen Vacuum Controller
The vacuum controller serves as a device for labs to display, adjust and control the degree of vacuum in vacuum systems. It generally constitutes the vacuum control system of rotary evaporator along with vacuum pump, which enables repeatable distillation experiment and recovery of many kinds of solvents in an efficient and automatic manner.
-
50L Vacuum Filter Jacketed Glass Vessel Stirred Crystallization Reactor with Mother Liquor
Compared to standard jacketed glass reactor, the Lab1st JGR-FK series is more multifunctional since it has reaction, crystallization as well as filtration functions. Besides, it has a liquid collection flask to collect liquids after reaction. JGR-50FK is made of high borosilicate glass and equipped with PTFE seals, ensuring clean and long lifespan. It can be operated under a wide range of temperature from -80℃ to 200℃ and the stirring motor is 120W, bringing you remarkable performance.
-
1L Chemical Lab Jacketed Glass Reactor Vessel with Digital Display for Laboratory Reaction
Lab1st JGR-L series jacketed glass reactors are designed as a multi-purpose reaction platform with controlled temperature and pressure environment, for both laboratory and scale-up applications. Each reactor consists of a corrosion resistant jacketed glass reaction vessel, PTFE coated variable speed stirrer system, temperature probe and digital display, and other accessories like feeding funnel, coiled condenser and bottom discharge valve.
-
30L Chemical Lab Jacketed Glass Reactor Vessel with Digital Display for Laboratory Reaction
Lab1st JGR-L series jacketed glass reactors are designed as a multi-purpose reaction platform with controlled temperature and pressure environment, for both laboratory and scale-up applications. Each reactor consists of a corrosion resistant jacketed glass reaction vessel, PTFE coated variable speed stirrer system, temperature probe and digital display, and other accessories like feeding funnel, coiled condenser and bottom discharge valve.
-
1500-2500 ml/h Evaporation Rate Glass Vacuum Spray Dryer
Lab1st SDG series spray dryer is mainly used to produce trace particle powder for universities, research institutes and enterprises’ laboratories in food, medicine and chemical industry. It has broad spectrum applicability to all solutions such as emulsion and suspension, and is suitable for drying heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc. The material is heated only when they sprayed into mist size particles, so they are just instantaneously heated and can keep these active materials maintain its active ingredients.
-
1500-2500 ml/h Evaporation Rate Stainless Steel Vacuum Spray Dryer
Lab1st SDS series spray dryer is mainly used to produce trace particle powder for universities, research institutes and enterprises’ laboratories in food, medicine and chemical industry. It has broad spectrum applicability to all solutions such as emulsion and suspension, and is suitable for drying heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc. The material is heated only when they sprayed into mist size particles, so they are just instantaneously heated and can keep these active materials maintain its active ingredients.
-
100L Vaccum Filter Jacketed Glass Vessel Stirred Crystallization Reactor
Compared to standard jacketed glass reactor, the Lab1st JGR-FK series glass reactor is more multifunctional since it has reaction, crystallization as well as filtration functions. Besides, the 100 liter filter reactor has a liquid collection flask to collect liquids after reaction. Lab1st batch reactor is made of high borosilicate glass amd equipped with PTFE seals, ensuring clean and long lifespan. 100L lab chemical reactor can be operated under a wide range of temperature from -80℃ to 200℃ and the stirring motor is 200W, bringing you remarkable performance.
Features:With Filter plate on the bottom for filtration and Equipped with mother liquor collection flask with condenser and moving trolley.
Jacket interface can be matched with different heater and chiller.
Optional high quality thermal insulation jacket available. -
5L Vaccum Filter Jacketed Glass Vessel Stirred Reactor
The Lab1st JGR-F series is more versatile than other series as it has three functions: reaction, crystallization and filtration. JGR-20F is made of high borosilicate glass amd equipped with PTFE seals, ensuring clean and long lifespan. It can be operated under a wide range of temperature from -80℃ to 200℃ and the stirring motor is 120W, bringing you remarkable performance. In addition, with a filter base at the bottom of the glass vessel, you no longer need to transfer material, hence largely reduces material losses.
-
Spill Deck
For a lower profile containment, use spill decks to make handling much easier. This can lower drum tops so that they are not dangerously close to eye level.
MODEL:
• SPP300, 1 drum
• SPP301, 2 drums
• SPP303, 4 drums -
Spill Pallets
Using this unit can help with storage and transportation of oil drums, chemical barrels and other containers you need for spill prevention and control. The unit comes with a hexagonal drain plug that facilitates drainage. Its overlay structure saves space and transportation costs.
MODEL:
• SPP202, 2 drums
• SPP304, 4 drums -
Downdraft Ductless Fume Hood / DLF-SL100V1
Designed with portability and functionality in mind, Starlinx Ductless Fume Hood meets all modern laboratory needs. With unrestricted viewing from all sides, this fume hood is a perfect unit for educational and demonstration purposes.
Safety is also assured with a filtration system consisting of honeycomb-activated carbon filters designed to neutralize chemical fumes emitted from lab activities. -
Mini Ductless Fume Hood / DLF-076XP
If you have a need for a compact ductless fume hood, this model may be an excellent choice for your application. The unit is available with an activated carbon filter. The small size and low power consumption of this unit make it easy to move and transport if required.
-
Mobile Ductless Fume Hood / DLF-120XP
If you have a need for a compact ductless fume hood, this model may be an excellent choice for your application. The unit is available with an activated carbon filter. The small size and low power consumption of this unit make it easy to move and transport if required.
-
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
CryoKING CKS-5008 8-Channel Decapper (for external thread tube)
Features:
● Easy-to-use design: Caps or decaps 8 tubes in an individual line. One-hand operation
● Convenient operation: Improves processing throughput of manual procedures with automated column-wise decapping and capping in just 3 seconds
● Optimal torque level: Ensures reproducibility by capping decapping all tubes to the optimal torque level
● Ergonomic design: Light weight, easy-to-use and ergonomic design
● Extra-long standby time: Enhances the convenience of actual operation
● Low noise: Enables the capping /decapping noise less than 5 decibels -
Vista-ER Vista with Embedded Essentials-ER Software
– Provides a standalone transmittance colour measurement solution designed to help users achieve FDA CFR 21 Part 11 compliance
– This standaline solution eliminates the need for users to purchase external ER compliant software and computer solutions
– The user can also purchase the Validation and Compliance Solution (DQNB) that helps validate the instrument and software procedure -
DO850 Portable Dissolved Oxygen Meter Kit
State of the art Luminescent Optical DO Sensor
No Membrane, No Solution, No Hassle.
Quick & Accurate Measurements
The DO probe/tester/sensor does not consume oxygen. No limit on water flowing speed.
Maintenance-free. No need to calibrate before every use.
The service life of the luminescent cap is over 8000 hours. No need to replace the cap every year. -
PC850 Portable pH/Conductivity Meter Kit
Apera Instruments Value Series PC850 Portable pH/Conductivity Meter Kit is designed for professional pH and conductivity measurement in the field with a variety of practical functions and features in a rugged structure. Up to three electrodes can be connected to the meter simultaneously for the measurement of multiple parameters, including pH, conductivity, TDS, temperature, and ORP.
ORP measurement is available in mV mode with an ORP probe connected (model 301Pt-C, sold separately). -
PH8500 Portable pH Meter Kit with GLP Data Logger and USB Data Output
Ideal for use in harsh environments — IP57 Waterproof rating, silicone socket protector and grip cover protect the instrument from general impact.
-
PH850 Portable pH Meter Kit
Built-in self-diagnosis ensures pH calibration will be performed correctly and guides you on how to fix common problems.
-
801 Magnetic Stirrer
Highly cost-effective choice of a reliable Magnetic Stirrer/Mixer
-
PH700 Benchtop pH Meter Kit
Advanced digital processing technology helps generate quick and stable pH readings
-
ZenTest PC60-Z Smart Multi-Parameter Pocket Tester Kit
The next-generation tester designed for seamless water test experience. Professional measurements for pH, conductivity (EC), ORP (ORP probe sold separately), TDS (ppm), salinity (ppt), resistivity and temperature now become easier than ever.
Just connect the tester to your smartphone via Bluetooth in the ZenTest mobile App (Free download in iOS App Store/Google Play Store), the step-by-step smart guide will lead you to become a water test professional with just a few taps.
Save and share your measurement and calibration data right on the palm of your hand via email. Data will never get lost thanks to the cloud-based data system. -
ZenTest PH60-Z Smart Pocket pH Tester Kit
The next-generation tester designed for seamless water test experience. Professional pH measurements for general water solutions now become easier than ever. ORP test is also available with an ORP probe (sold separately).
Just connect the tester to your smartphone via Bluetooth in the ZenTest mobile App (Free download in iOS App Store/Google Play Store), the step-by-step smart guide will lead you to become a water test professional with just a few taps.
Save and share your measurement and calibration data right on the palm of your hand via email. Data will never get lost thanks to the cloud-based data system. -
PH60S Premium Spear pH Pocket Tester Kit for Food Testing (cheese, fruit, sushi rice, meat, dough…)
The replaceable Swiss spear pH probe is designed for professional pH measurements of food/solid/viscous samplings such as cheese, fruit, sushi rice, dough, meat, sauce, jam, yogurt, skincare products, etc. (also works great for general water solutions).
-
PC60 Premium Multiparameter (pH/EC/TDS/Salinity/Temp.) Pocket Tester Kit
Simultaneously tests pH/EC/TDS/Salinity/Temperature in a quick, accurate, and reliable manner
-
SX610 pH Pen Tester, Suitable for Test Tube pH Testing
The Apera Instruments SX610 pH Pen Tester is featured with reliable measuring performance with a single-button operation in a slim body. A cost-effective choice for your regular pH testing, including hydroponics, water treatment, education, pools& spas, and etc. The pH probe is replaceable and suitable for test tube measurements, which is especially good for educational use.
Easy Auto Calibration (1 point: 7.00 pH) with buffer recognition and 0 to 60°C(32-140°F) Auto Temperature Compensation (ATC), ±0.1 pH/1.0°C accuracy with 0 to 14.0 pH measuring range. Intelligent functions: automatic power-off, low battery alarm, pH probe invalidation reminder (remind you to replace the probe for better performance).The SX610 pH Pen Tester/Meter comes with a complete kit of premixed calibration solutions (7.00 pH), storage solutions (3M KCL), CR2032 lithium batteries all in a portable carrying case. IP57 waterproof and dustproof floats on water, so you don’t have to worry if it falls into the water by accident.
-
PH20 Value Pocket pH Tester Kit
Apera’s proprietary pH sensor with low impedance greatly improves response speed
-
MS110 microbial shaking incubator
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.
MODEL:
• MS110 microbial shaking incubator
OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder（ 550×900 mm ）• RF2100 Universal spring mesh holder（ 510×410 mm ）• RF23W Test tube rack holder（50MLx18；15MLx24）• RF24W Test tube rack holder（15MLx52)• RF25W Test tube rack holder（50MLx30）• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad（ 140×140mm )
