-
Longer Pump BT300-2J [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Medium Flow Rate Peristaltic Pump BT300-2J could be loaded with YZ1515X, YZ2515X, YZII15, YZII25 and DG15-24. The pump provides flow rates from 0.07mL/min to 1140 mL/min. The speed could be controlled through control panel, external control interface or RS485 interface. The running parameters are saved automatically. And the pump could be operated easily. -
MS110 microbial shaking incubator
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.
MODEL:
• MS110 microbial shaking incubator
OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
SM798R Floor-Standing High Capacity Grinder (with Freezing)
For grinding samples, it is a grinder with freezing function.
-
SM798 Floor-Standing High Capacity Grinder
For grinding samples, it is a floor-standing high capacity grinder.
-
C3310-0500, TransfMEM
TransfMEM-α Reduced Serum Medium. Pkg size: 500 ml/bottle
-
C3560-0500, Water, Cell Culture
Water, Cell Culture Grade
-
C3530-0100, Trypsin-EDTA solution A
Trypsin EDTA Solution A (0.25%), EDTA (0.02%), with Phenol Red
-
C3730-0100, Trypan Blue
Trypan Blue Solution, 5mg/ml in Saline
-
C3590-0500, dPBS, without Ca and Mg
Vivacell dPBS, without Ca and Mg, 500 ml/bottle <Amb Storage>
-
C3490-1000, Anti-mycoplasma, fungal, virus and bacterial spray (1L)
Pharmacidal, for disinfecting surfaces. Pkg size: 1 litre/bottle
-
C3490-0100, Anti-mycoplasma, fungal, virus and bacterial spray (100ml)
Pharmacidal, for disinfecting surfaces. Pkg size: 100 ml/bottle
-
C3481-0050, Aquaguard 2
Aquaguard-2 (Ordinary Water Baths)-Former: BI: 01-916-1E
-
C3480-0100, Aquaguard 1
Aquaguard-1 (Water-Baths in CO2 Incubators)-Former: BI: 01-867-1B
-
Cell Factory, TC Treated, Sterile , Vent cap
Features:
•Medical-grade transparent polystyrene (PS) material that complies with USPVI. And the heat treatment process combined with injection molding is adopted to make the product have good toughness, and it is not easy to be damaged during transportation and transfer.
•The cell factory adopts a self-developed surface modification process, which has strong hydrophilicity and better cell adhesion performance.
•C-level purification workshop production, the production process conforms to the ISO13485 quality management system, professional fully automatic production line, the product has passed the three-level sealing test before leaving the factory to ensure that the product sealing is 100% qualified.
•With a perfect quality management system, each batch has undergone a performance test to ensure the consistency and stability of product performance between different batches.
•The double-big mouth design improves the speed of filling and harvesting liquid, and is not easy to generate air bubbles, which is conducive to gas exchange and
high-density cell culture.
•The cell factory is equipped with a complete set of sealed pipeline system, which provides two pipeline forms of thermoplastic tube or silicone tube, which can be connected with the pipeline of the liquid inlet system and the harvest system, and the liquid is carried out through a peristaltic pump or a pressure system. input and output.
•The cell factory is equipped with a fast-switching sealing cover (patented product), which can switch between airtight and airtight states in a conventional
environment (greenhouse), meeting the needs of dissolved oxygen and exhaust in different culture stages of cells and viruses.
•The finished cell factory has passed the tests of the third-party testing agency (SGS) ISO10993-10, USP87 and the United States Pharmacopoeia, and has no
sensitization, no hemolytic, no pyrogen and no cytotoxicity, etc.
OPTIONS AVAILABLE:
•JT85301: 1 layer, 635cm², 1 pc/ bag, 8 pcs/ carton
•JT85302: 2 layers, 1270cm², 1 pc/ bag, 8 pcs/ carton
•JT85303: 5 layers, 3175cm², 1 pc/ bag, 6 pcs/ carton
•JT85304: 10 layers, 6350cm², 1 pc/ bag, 4 pcs/ carton -
Screw Cap Micro Tube, -80℃~120℃, O-ring, Clear, Sterile
Features:
•Unique external screw cap design ensures excellent airtightness.
•Maximum withstand high heart force: 20000RCF.
•The bottom can be vertically designed to facilitate the vertical placement of samples.
•The wall thickness is precisely controlled, and it maintains excellent stability in the temperature range of -80C -121%C.
•No DNase, RNase, no pyrogen.
VOLUMES AVAILABLE:
•JT201500: 0.5mL, 500 pcs/pack, 10 packs/case
•JT201501: 1.5mL, 500 pcs/pack, 5 packs/case
•JT201502: 2mL, 500 pcs/pack, 5 packs/case -
Erlenmeyer Flask, Vent Cap, PC, Sterile
Features:
•Flat-bottom Erlenmeyer flasks save preparation time and avoid the risk of cross-contamination. Precise scale marks for easy observation. The vented cap ensures gas circulation, while the ventilated and water-tight features ensure that the culture medium does not leak out.
•Electron beam sterilizable, reusable
•Production in clean environment, DNase/RNase free
VOLUMES AVAILABLE:
•JT301125-1: 125mL, 1 pcs/pack, 24packs/case
•JT301250-1: 250mL, 1 pcs/pack, 12packs/case
•JT301500-1: 500mL, 1 pcs/pack, 12packs/case
•JT301000-1: 1000mL, 1 pcs/pack, 12packs/case -
Cell Culture Dish, TC Treated, Friendly Handling, Sterile
Features:
•The new saw edge design is convenient for the user to take the whole plant stably, or take out a plant from the stack of multiple plants. The bottom is flat and transparent, and it will not be optically distorted and deformed under the microscope.
•Special TC treatment on the culture surface, excellent cell adhesion
•Cover ventilation grid design to ensure gas exchange
•No pyrogen, no endotoxin
OPTIONS AVAILABLE:
•JT101035: 35mm, 20 pcs/pack, 25 packs/ctn
•JT101060: 60mm, 20 pcs/pack, 25 packs/ctn
•JT101100: 100mm, 10 pcs/pack, 30 packs/ctn
•JT101150: 150mm, 10 pcs/pack, 8 packs/ctn -
Cell Culture Plate, TC Treated, Sterile
Features:
•Based on multi-well parallel culture, JJTECH provides cell culture plates with different specifications of 6, 12, 24, 48 and 96 wells. All culture plates are made of highly permeable high -quality polystyrene, not only the space of the culture wells is highly consistent, but the whole plate is also highly flat.
•The dimensions of the cell culture plate strictly follow the requirements of the ANSI/SLAS standard, and can be used for instrument operation and analysis that meet this standard.
•The product features are as follows: In order to facilitate the addition of samples in the well, letters and numbers are marked on the edge of the groove and in the gap of the culture well.
•Independent groove design reduces the risk of pipetting contamination.
•The non-slip design of the base helps to take out the entire culture plate smoothly, and the transparent side wall can be used for visual inspection of the sample in the well.
•The ventilation pattern inside the lid and the design of the condensation ring, both of which together ensure a stable gas exchange and minimize evaporation.
•Packing: 1 pcs/pack, 50 packs/ctn
OPTIONS AVAILABLE:
•JT100386A: 6 wells
•JT100312A: 12 wells
•JT100324A: 24 wells
•JT100348A: 48 wells
•JT100396A: 96 wells -
Cell Culture Flask, Vent Cap, TC Treated, Sterile
Features
•Cell scrapers and serum pipettes can reach any drop. There are eye-catching writing areas on both sides of the bottle neck, and scales are printed on both sides, which is easy to use.
•The anti-rollover design of the bottle body reduces the risk of contamination. In addition, stacking edges ensure stability when stacked.
•Optimized sloping neck and anti-drip rim reduce the risk of contamination from media spillage and allow for safer pouring.
•Aseptic ziplock bag packaging
•High Definition, Polystyrene Material
•Frosted writable area on bottle side, graduations on both sides
•Stacking design is not easy to slip, easy to stack
•Electron Beam Sterilization
•No pyrogen, no endotoxin, no cytotoxicity
CULTIVATION AREA AVAILABLE:
•JT102025: T25, 25cm², 10pcs/pack, 20pack/carton
•JT102075: T75, 75cm², 5pcs/pack, 20pack/carton
•JT102175: T175, 175cm², 5pcs/pack, 10pack/carton
•JT102275: T225, 225cm², 5pcs/pack, 5pack/carton -
MS86 microbial shaking incubator
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• MS86 microbial shaking incubatorOPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
CS315 CO2 shaking incubator (refrigerated)
For shaking culture of cell , it’s UV sterilization CO2 shaking incubator.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• CS315 CO2 shaking incubator(refrigerated)OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
C240/ C240P 245L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 245L volume.
MODEL:
• C240: 140℃ high heat sterilization
• C240P: 180℃ high heat sterilization -
C80/ C80P 85L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 85L volume.
MODEL:
• C80: 140℃ high heat sterilization
• C80P: 180℃ high heat sterilization -
C180/ C180P 180L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 185L volume.
MODEL:
• C180: 140℃ high heat sterilization
• C180P: 180℃ high heat sterilization -
MS315/MS315T microbial shaking incubator (refrigerated)
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• MS315 button screen microbial shaking incubator (refrigerated)• MS315T touch screen microbial shaking incubator (refrigerated)OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm )