-
SCG-W3000 Chemiluminescence Imaging System
*Sale price valid for display unit only, while stock last
I. Introduction
SCG-W3000 is an imaging device that utilizes chemiluminescence technology and is equipped with a high-sensitivity cooled camera with 9 million pixels. It enables fast, accurate, and high-throughput detection and imaging of samples, and is widely used in fields such as life sciences, medicine, and environmental protection.
II. Features
Real-time Imaging: Present the changes in sample signals during the exposure process in real-time, capturing every detail of the shot. Overexposed areas will be indicated for samples that are overexposed.Time Imaging: After the exposure is completed, every frame image within the exposure time can be generated. Through precise retrospective adjustments, users can select any frame image within that exposure time as the final output.
Time Accumulation: For samples with insufficient exposure, users can choose to continue the exposure after the exposure ends, allowing the sample to obtain additional exposure effects based on the exposure time already accumulated.
Automatic Exposure: Intelligent exposure technology can quickly determine the optimal exposure time. With the functions of time imaging and time accumulation, users can obtain the best image results with just one operation.
-
SWE-FP Tissue Homogenizer Low Temperature (-50℃, Freezing Table)
*Sale price valid for display unit only, while stock last
Product Introduction
SWE-FP is a newly upgraded low-temperature homogenizer, which can reach a temperature as low as -50℃ in the chamber and also equipped with a freezing table.Adopt high-speed reciprocating motion of the vertical shaking system, the frozen sample in the grinding tube collides with the grinding bead, and the resulting grinding shear force and impact force completely break down the tissue. Up to 192 samples can be processed simultaneously in one minute, making it a dedicated device that meets the requirements of rapid processing of multi-sample.
Product Features
1. Slider drive, no wear shaft, noise stability and durability;
2. Equiped with low temperature freezing table. It can meet the needs of sample storage, electrophoresis, membrane transfer and other low-temperature experiments
3. Imported compressor,lowest cooling temperature of -50℃,low temperature grinding throughout the process,reducing degradation of proteins and RNA.
4. Up to 192 samples can be processed simultaneously in 1 minute (24 samples can be processed with standard),efficiently and effectively completing sample grinding with high throughput.
5. Multiple adapters to choose. -
SZY-2L Vacuum Aspirator
*Sale price valid for display unit only, while stock last
Product Introduction
The vacuum aspirator can collect and store various liquids. The objects of use include various cell culture dishes, test tube orifice plates and even experimental desktops to ensure the safety and tidiness of the laboratory.
Product Features
1. The built-in battery is convenient to bring into the sterile operating table；
2. The connection can be automatically closed when the collection bottle is full to prevent overflow；
3. Quick-connect fittings ensure secure installation of tubes and collection bottles；
4. Two control methods can control the suction by foot pedal and knob. -
SMB-PC Dry Bath (Programmable, Heating, Cooling)
*Sale price valid for display unit only, while stock last
Product Description:
This product is an advanced microcomputer-controlled dry bath incubator with a wide selection of metal blocks suitable for various test tubes, which can be widely used for sample preservation, enzymes preservation and reaction, pre-denaturation of DNA amplification and electrophoresis, serum coagulation, etc.
Normal Working Conditions:
Ambient temperature: 10°C~ 30°C
Relative humidity: ≤ 70%
Input power: AC100 ~ 240
AC frequency: 50 Hz/60 Hz
Output power: 24 V 6.25 A 150 W
Note: Before using the instrument, please confirm whether the working conditions meet the above requirements -
SMV-P Vertial Vortex Mixer
*Sale price valid for display unit only, while stock last
Product Introduction
The vertical mixer is suitable for general mixing scenarios in industries such as biology, medicine, and chemicals.
However, it is not recommended for use in cold storage.
Product Features
Rotaryoperation,gentle and thorough mixing
Adjustable speed range:10-80rpm
Accuratespeed control
Low noise
Various sizes of adapters can be freely combined, suitable for 1.5mL,2.0mL,5mL, 10mL, 15ml,and 50ml centrifuge tubes
Memoryfunction: The startup parameters are set to thelast settings before shutdown -
SMV-R Rotary Vortex Mixer
*Sale price valid for display unit only, while stock last
Product Introduction
The rotary mixer is suitable for conventional mixing scenarios in industries such as biology, medicine, and chemical engineering. However, it is not recommended for use in a cold storage.
Product Features
Rotary operation for gentle and thorough mixing
Adjustable angle range: 0-90 for single-layer adapter, 50°-90° double-layer adapter
Adjustable speed range: 0-80rpm
Accurate speed
Low noise
Multiple specifications of clips can be freely combined, suitable for 1.5mL, 2.0mL, 5mL, 10mL, 15mL, and 50mL centrifuge tubes
Memory function: the parameters at startup are the same as the last settings before the last shutdown -
SMV-4500B Vortex Mixer (Digital display,button)
*Sale price valid for display unit only, while stock last
Product Description
SMV vortex mixers series are used in the fields of life science, andphysical& chemical analysis for oscillation, mixing and stirring of sample tissues, cells, bacterialliquid, chemical reagents, etc.The vortex mixer has a variety of adapters suitable for 0.2mL~50mL centrifuge tubes, microplates, etc.
Features
1. Accurate point recognition of pressure sensor
2. Zero silicone foot mat, super shock proof, suitable for high-speed work
3. Adjustable speed, wide range setting ofspeed
4. A variety of vibration module adapters are available
5. Equiped with brushless motor longer lifespan and more durable -
SMS-200A Magnetic Stirrer (Heating)
*Sale price valid for display unit only, while stock last
Product Information
The magnetic stirrer is a laboratory instrument used for liquid mixing, mainly for stirring or simultaneously heating and stirring low-viscosity liquids or solid-liquid mixtures. Its basic principle is to use the principle of same-sex repulsion and opposite-sex attraction of the magnetic field to push the magnetically placed stir bar in the container to perform circular motion, thereby achieving the purpose of stirring the liquid. With the heating temperature control system, it can heat and control the sample temperature according to specific experimental requirements, maintain the required temperature conditions for experimental conditions, and ensure that the liquid mixing meets the experimental requirements.
Product Features
1. 10L stirring volume, increased magnetic force.
2. Equipped with heating temperature control system, heating and controlling sample temperature, with high temperature control accuracy.
3. Automatic and manual modes. Automatic search for stir bar.
4. Intelligent anti-jumping stir bar, it will automatically restart after the stir bar jumps.
5. LCD display, intuitive and clear, easy to operate.
6. .The side of the instrument can absorb the stir bar, which can avoid the stir bar from being lost frequently
7. Anti-collision, anti-scalding design, flame-retardant materials for safer use. -
SMP-2 Microplate Centrifuge (for PCR plate)
*Sale price valid for display unit only, while stock last
Product Description
Microplate centrifuge is a transient centrifuge specially designed for 96-well plates, which is convenient for separating the droplets hanging on the wall. The microplates are vertically loaded into the centrifuge cavity from the top slot of the centrifuge, and the liquid is kept at the bottom of the microplates under the action of surface tension, so there is no need to worry about leakage. Close the top cover of the centrifuge, and the rotor will be accelerated to 2200 rpm instantaneously.
Product Features
1. Can take 2 microplates at the same time without manual rotation.
2. The motor actively brakes to achieve a slow stop within 10s.
3. Inductive switch, stop when the door is opened. Can be operated with one hand
4. Bottom plate counterweight, lower center of gravity, no vibration when starting, more stable operation. -
SMC-5000F Mini Centrifuge
*Sale price valid for display unit only, while stock last
Product Description
This product is a new generation of mini centrifuge, the overall skeleton surface shape, novel and simple appearance. One-piece composite rotor, compatible with multi-channel and multi-standard centrifuge tubes. It has the function of stopping immediately after opening the cover, and the unique stop speed adjustment function can realize the free switching betweenemergency stop and slow stop, which can be widely used in the separation experiment of trace samples.
Features
1. Composite rotor, can centrifuge 0.1 mL, 0.2 mL, 8-stip tube, 0.5 mL, 1.5 mL, and 2 mL EP tube at the same time.
2. The speed is 5000 rpm, and the centrifugal force is 1700 g, with anti-skid and idling protection
3. There are two stop modes to choose from: opening the cover for emergency stop and slow stop, meeting the needs of different applications
4. Equipped with a brushless motor with long service life. -
DS-3D100 Multi-functional Shaker (Horizontal + Pendulum+ 3D)
*Sale price valid for display unit only, while stock last
Product Introduction
Shakers are commonly used in Western experiments such as blocking of blotting membranes, antibody incubation, washing, fixation, staining, and destaining of electrophoretic gels; they can also be used for shaking liquids in various centrifuge tubes, multi-well plates, petri dishes, and culture bottles. Mix well. The movement modes are horizontal, pendulum and three-dimensional composite, and the Servicebio shaker is equipped with LCD display, knob-type control keys and digital timing function.
Product advantages
1.Three independent modes: swing, horizontal, and 3D. In 3D mode, the mixing intensity can be set separately.
2.Automatically stops in a horizontal position after operation. Timer and power-off memory function.
3..Equipped with a stepper motor for precise speed control and long lifespan.
4.Large tray and large LCD screen for easy operation.
5.Rust-proof treatment on the base plate for durability. -
SVT-2 Electrophoresis System (Transfer)
*Sale price valid for display unit only, while stock last
Product introduction
This product can be used with SVE-2 vertical electrophoresis. The electric field is used to transfer the proteins, nucleic acids, etc. in the gel after electrophoresis to the transfer membrane, and then the charged particles are further analyzed and studied by means of biochemical analysis.
Product Features
a. Double plate structure, can be used with SVE-2 electrophoresistank.
b. The tank of the instrument is integrated injection molding with high transparency polycarbonate, it’s corrosion resistance, high transparency, consistent performance, etc..
c. The positive and negative electrodes of the transfer clip are distinct, with a handle function, which is easy to operate.
d. High transfer efficiency, transfer time is about 20-40min.
e. Strong structure can be synchronized with the ice bath cooling to avoid interference caused by overheating, so as to ensure reliable experimental results. -
SVE-2 Electrophoresis System (Vertical)
*Sale price valid for display unit only, while stock last
1.Product overview
Electrophoresis technology is widely used in biological research, analytical chemistry, clinical chemistry, toxicology, pharmacology, immunology, food chemistry and other fields.
In a DC electric field, the phenomenon in which charged particles move toward electrodes with opposite signs is called electrophoresis. Small molecules can be separated and analyzed by electrophoresis, and electrophoresis is commonly used in modern medicine to study proteins, nucleic acids, enzymes and even virus cells.
Electrophoresis can not only be used for protein separation and content determination, but also has many new applications in immunological experiments. For example: Hepatitis B antigen (HBAg) electrophoresis assay for the diagnosis of hepatitis B, alpha-fetoprotein (AFP) electrophoresis assay for the diagnosis of primary liver cancer, etc.
2. Product Features
a. Using the in-situ gel-making mode, the gel-making and running process can be completed without disassembling and assembling the electrophoresis glass, and it is compatible with the running and electrophoresis requirements of the pre-cast gel products of this model.
b. The glue base is specially designed and locked by non-spring buckles to avoid glue leakage caused by insufficient spring pressure or aging.
c. The uniquely designed card plate is matched with the whole gland, so that the glass plate can be sealed by squeezing the sealing strip, avoiding the phenomenon of liquid leakage due to the side card not being lifted in place.
d. It can be adapted to glass plates and glue-making combs with various thickness intervals (1.5mm, 1mm , 0.75mm) to meet the needs of different sample volumes.
e. This electrophoresis instrument requires less electrophoresis buffer, and a minimum of 300mL can complete electrophoresis experiments.
f. Can be used with SVT-2 transfer electrophoresistank.. -
SVL-2 Integrated Horizontal Electrophoresis System（Electrophoresis Tank + blue light transilluminator)
*Sale price valid for display unit only, while stock last
ProductOverview
SVL-2 integrated horizontal electrophoresis instrument is mainly used for rapid agarose electrophoresis separation experiments of small amounts of DNA and RNA samples.
Product Features
1. The gel maker mold is integrally formed, which can make four different sizes ofgel blocks.
2. Standard blue light transilluminator, with SPW-6S electrophoresis power supply, can directly observe the band during the electrophoresis process.
3. The transparent upper cover has a hole design, which is convenient for heat dissipation and observation.
4. Card slot limit function, accurate operation.
5. The electrode holder and electrode head are detachable, which is convenient for cleaning and maintenance. -
SPW-DSE Electrophoresis Power Supply (Dual Module, Programmable)
*Sale price valid for display unit only, while stock last
Product Introduction
This product is a rectifier that converts alternating current into direct current. It can convert alternating current into controllable constant voltage and constant current direct current to meet the needs of electrophoresis and other experimental production. It is widely used in biology, medicine and other fields, such as nucleic acid gel electrophoresis, Protein gel electrophoresis, Western Blot protein transfer and other experiments.
Product Features
1. Completely independent dual outputs, with the ability to set parameters separately.
2. Programmable function, capable of setting four working modes: constant voltage, constant current, voltage gradient, and current gradient.
3. Additional two sets of 12V outputs, suitable for use with blue light illuminator, gel loading lamps, and can be controlled separately.
4. Equippend with multiple abnormality alerts, including overvoltage, overcurrent, overload, variable load, and no load. -
Thermal cycler (96GE)
• Electric hot lid, one-button lid opening design, ensure perfect fit between hot lid and consumables
• 75 ° turnable 10.1 inch screen, foldable during standby
•Faster ramping rate, more accurate temperature control -
Thermal cycler (96B)
• Manual hot lid, high-strength mechanical buckle, not easy to wear
• Small size, light weight, suitable for various complex experimental environments
• Unique rear air outlet design, multiple machines can be placed side by side without difficult heat dissipation -
Real-time PCR (BFQP-16)
• High-quality Thermoelectric Module specially designed and customized, multi-point control, brings excellent temperature control performance, and BFQP-96 has a maximum ramp rate of 6 ℃/s
• Long-life maintenance-free LED excitation light source, high-sensitivity photomultiplier tube(PMT) and professional optical fiber ensure high-intensity and high-stability signal transmission.
• Well by well scanning results in no fluorescence edge effect, and the instruments do not need ROX calibration. The single-channel scanning time is less than 1.5s.
• The analysis software is friendly, intuitive, concise, humanized and easy-to-operate. New experiments can be quickly created in multiple ways, and the results are automatically analyzed after the experiment.
• The report template can be customized, and supports data export in multiple formats to facilitate acc ess to the LIMS system.
• Electric automatic hot lid,no manual operation is required.
• With 7 inch touch screen and computer installed inside (windows operation system) -
Real-time PCR (BFQP-96)
• High-quality Thermoelectric Module specially designed and customized, multi-point control, brings excellent temperature control performance, and BFQP-96 has a maximum ramp rate of 6 ℃/s
• Long-life maintenance-free LED excitation light source, high-sensitivity photomultiplier tube(PMT) and professional optical fiber ensure high-intensity and high-stability signal transmission.
• Well by well scanning results in no fluorescence edge effect, and the instruments do not need ROX calibration. The single-channel scanning time is less than 1.5s.
• The analysis software is friendly, intuitive, concise, humanized and easy-to-operate. New experiments can be quickly created in multiple ways, and the results are automatically analyzed after the experiment.
• The report template can be customized, and supports data export in multiple formats to facilitate acc ess to the LIMS system.
• Electric automatic hot lid,no manual operation is required.
• With 10 inch touch screen and computer installed inside (windows operation system) -
8-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-B10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-B300: Volume Range: 50-300 μL, Increment: 1 μL
•SPIP-B1000: Volume Range: 100-1000 μL, Increment: 5 μL -
Single-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-2.5: Volume Range: 0.1-2.5 μL, Increment: 0.05 μL
•SPIP-10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-20: Volume Range: 2-20 μL, Increment: 0.1 μL
•SPIP-100: Volume Range: 10-100 μL, Increment: 1 μL
•SPIP-200: Volume Range: 20-200 μL, Increment: 1 μL
•SPIP-1000: Volume Range: 100-1000 μL, Increment: 5 μL
•SPIP-5000: Volume Range: 1000-5000 μL, Increment: 50 μL
•SPIP-10000: Volume Range: 1-10 mL, Increment: 100 μL -
C2248-E StripSpin™ 12D Plus Digital Mini Fuge for 12-postion PCR Strips
The new StripSpin 12D digital mini centrifuge from Benchmark is uniquely designed for centrifugation of 12 position PCR strips. It features digital speed control up to 5,500 rpm, timer control up to 99 min., and a safety interlock to stop the centrifuge if the lid is opened during operation.
With built in rcf conversion, speed can be set/displayed in rpm or rcf, the StripSpin 12D is the perfect solution for centrifugation of up to 4 x 12-position high efficiency PCR strips (or 48 x 0.2ml tubes). -
C2205-E myFuge™ 5D Digital Mini Fuge with COMBI-rotor for 5ml tubes
The myFuge™ 5D digital mini centrifuge includes a four position rotor that accepts a variety of 5ml tubes (including 5ml snap-cap and screw-cap centrifuge tubes, as well as 5ml blood collection tubes). In addition, the rotor has four positions for positions for standard microtubes (1.5/2.0ml) and offers optional adapters for 2ml cryotubes, 0.2ml PCR tubes, and 0.5ml microtubes, making it one of the most versatile and compact centrifuges in its class.
The myFuge 5D offers digital speed control (up to 5,500 rpm). Timer is also controlled (up to 99 min.) with a safety interlock to stop the centrifuge if the lid is opened during operation. With built in rcf conversion, speed can be set/displayed in rpm or rcf. -
C2212-E myFuge™ 12 Plus Digital Mini Fuge with COMBI-rotor for tubes and strips
The unique rotor design of the new MyFuge 12 Plus eliminates the need to switch rotors (or use a separate centrifuge) when changing between microtubes and PCR strips. The included, COMBI-Rotor allows for simultaneous centrifugation of up to 12 microtubes and/or 4 PCR strips.
In addition, the MyFuge 12 Plus features a large digital display with adjustable speed (up to 7,000 rpm) and a digital timer. With built in rcf conversion, speed can be set/displayed in rpm or rcf.
The MyFuge 12 Plus combines power with intuitive functionality making it the perfect companion in any laboratory. -
IPS7000-3-E MHS-3 Multi-Positional Hotplate Stirrer
Magnetic Stirrer;150 to 2000 rpm; 35°C to 120°C
The Benchmark Multi-Position Stirring Hotplates provide simultaneous heating and stirring of multiple samples. The large top-plates feature a durable, chemically resistant, white-ceramic coating that provides exceptionally uniform temperature control up to 120°C. Both mixing speed and temperature are conveniently controlled on the digital display, which also features a safety LED that warns the user when the top plate is hot and unsafe to touch.
Three models are available, offering 3, 5 or 10 position capacity. Each stirring position is driven by an independent motor, providing efficient mixing of sample sizes up to 1000ml. With increased spacing (100mm) between stirring positions, the top surface is designed to accept a wide range of vessel types, including beakers, Erlenmeyer flasks and media storage bottles. -
B5200-E SureAir PCR Workstation
The Benchmark SureAir™ PCR workstation is a compact, convenient way to reduce contamination concerns and provide a clean room environment at a fraction of the space and cost. The high-powered yet quiet internal fan produces laminar flow conditions without any installation into ductwork. The included HEPA filter purifies air within the chamber, meeting ISO 5 cleanliness standards, and filters 99.97% of particles 0.3 µm and larger. The double-hinged front panel provides ample workspace for convenient hand access, and can be opened fully to allow placement of equipment inside.
The SureAir is designed to keep your workspace clean, easy-to-use, and organized. An included germicidal UVC light eliminates any stray DNA that may contaminate samples, and is programmed to automatically shut off after 15 minutes. To protect users, the UVC light is only operational when the cover is closed, and will shut off upon opening the cover.
Ample lighting is provided by an energy efficient LED light source. Up to 3 standard size pipettes are accommodated by the pipette holder integrated within the storage shelf. Pipette tips and small instruments can also be stored away from the main workspace when not in use. Power cables can easily be routed through the access port on the right side of the chamber. -
H6004-E Incu-Mixer MP4 Heated Microplate Vortexer, 4 positions
Circle; 100 to 1500rpm; Ambient +5°C to 70°C
The new Incu-Mixer MP series by Benchmark Scientific is designed to provide an optimal method for vortexing and incubating microplates. Simultaneous heating from both the bottom surface and the lid provide temperature uniformity throughout the sample. Additionally, the heated lid minimizes evaporation and prevents condensation.
A compact, 2mm orbit ensures thorough mixing in microplates without splashing. Speed, time and temperature are all displayed in real time on the large LCD screen while an internal validation system constantly monitors all parameters for accuracy.
Independent time, temperature and speed controls allow the mixer to function as 3 machines in one; a multi-plate incubator, vortexer, or a combination of the two. The Incu-Mixer MP series is ideal for a wide variety of molecular biology applications including immunochemical reactions, enzyme and protein analysis, and microarray analysis.
OPTIONAL ACCESSORIES:
•BT1500-A1520 Microtube Adapter for 1.5/2.0mL microtubes (for H6004 only)
•BT1500-A05 Microtube Adapter for 0.5mL microtubes (for H6004 only) -
MRX A2000 Microplate Reader
The MRX A2000 can be used with 6 – 384 well plates and cuvettes and provides excellent measurement performance in the UV-VIS area.
User convenience has been improved by applying intuitive PC software. Endpoint, Kinetic, Spectral scanning, Well area scan modes are provided, and incubation and Shaking functions are also provided to enable various applications.
Main Charateristics:
– Quantitative analysis of nucleic acids and proteins, ELISA, and microbial growth experiments are possible by selecting a wavelength in the range of 200 – 999 nm
– Various workflows can be applied by providing endpoint, kinetic, spectral scanning, and well area scanning modes
– Compatible with 6 to 384 well plates
– Quantitative analysis of nucleic acids without dilution using the Micro-Volume Plates accessory
– Temperature-controlled down to 65°C and control of water vapor condensation to perform temperature-sensitive assays
– Linear, orbital and double orbital shaking
– Measurement possible through Cuvette port (Optional) (to be released in the second half of 21st)
Application:
– Endpoint or Kinetic ELISA
– Nucleic acid and protein direct quantification
– Microbial growth assays
– Cytotoxicity assay
– Cell proliferation assay
– Spectral scanning -
OPTIZEN NanoQ Microvolume Spectrophotometer
NanoQ is wide wavelength microvolume spectrophotometer with modern design and user convenience UI. It supplies extremely fast and easy quantitative analysis of nucleic acid and protein by UV-Vis absorption spectrophotometry. It provides microvolume sample measuring mode and cuvette measuring mode so can measure wide range of concentration. You can easily set over 20 measuring modes.
Main Charateristics:
– It is a small spectrophotometer featuring compact size and main unit control.
– A user can conduct the measurement precisely because it can be automatically set the pathlength according to the concentration.
– Can Add User Menu combined by user’s most accessed measure mode.
There is no need for measurement standby since it does not require a lamp warming-up.
– It can measure protein and conduct cell counting. *Cuvettes are only available in OPTIZEN NanoQ Plus.
– The measurement result can be saved or downloaded to a USB flash drive.
– A user can easily operate the system using the intuitive LCD screen and touch functions.
– It helps even novice users to drop the sample easily and accurately on the loading spot. -
OPTIZEN POP Single-Beam Spectrophotometer.
OPTIZEN POP measures transmittance or absorbance for each wavelength of a sample in the ultraviolet and visible ray bands, and through this, quantitative characteristics such as concentration and purity can be identified.
OPTIZEN POP, which can be used widely from general analysis experiments to specialized research fields, guarantees accurate measurement and excellent reproducibility, providing reliable results in various fields such as environment, biotechnology, and chemistry.
OPTIZEN POP provides 4 measurement modes (Photometric Mode, Quantitation Mode, Spectrum Mode, Kinetics Mode), and the user can select and use the corresponding mode according to the purpose of measurement. Using the S/W built into the equipment, touch screen interface, and application software, it helps the user to use the equipment very easily.
Product Features
– User convenience
All functions of the existing PC software are loaded into OPTIZEN POP for faster and more convenient use.
– Amazing measurement speed
The fast and flexible software delivers the best results at analysis speeds up to 1.5 times faster than conventional products.
– Compact size
The compactly designed OPTIZEN POP increases the efficiency of the laboratory space.
– Prompt service
Based on OPTIZEN’s proprietary technology, service is available from design to manufacturing in Korea.
– Wide scalability
Designed to enable high-precision/high-resolution measurement in a wide range from ultraviolet to visible light, it can be used in various application fields.
– Emotional design
Now you can enjoy another pleasure with emotional design
Product function
– Help is presented in an easy-to-understand graphical format.
– If you register the information being measured, analyzed, or completed as a favorite, you can quickly and easily call it up and work with it.
– Can be used in conjunction with PC through OPTIZEN View
– It is possible to measure in an optimal state by checking the operating time of the equipment, the preheating status of the lamp, and the accumulated usage time in real time.
– It is possible to select the cell type and monitor the measurement without entering a mode, and the quick menu cell type icon changes depending on the cell type status or location, making it easy to check the current cell status.
– It employs a temperature measurement system as standard, allowing for temperature confirmation/recording at the moment of analysis.
– It supports convenient voice guidance and volume control function.
– It comes equipped with a multi-cell system as standard, enabling automatic measurement of a large quantity of samples. -
OPTIZEN Alpha UV-VIS Spectrophotometer
OPTIZEN Alpha is a spectrophotometer that uses a double-beam method.
OPTIZEN Alpha can measure the transmittance or absorbance at each wavelength of a sample in ultraviolet and visible light bands to determine the quantitative characteristics such as concentration and purity.
OPTIZEN Alpha, which can be used widely from general analytical experiments to professional research fields, guarantees accurate measurement and excellent reproducibility and provides reliable results in various fields such as the environment, biotechnology, and chemistry.
The previous single beam type spectrophotometer has a weak point of error occurrence in measuring a sample, because of the movement of a light source by time lag in measuring the strength of between a reference light and a light from sample. To solve the problem, OPTIZEN Alpha was designed as a double-beam type spectrophotometer. The system utilizes an additional reference beam to improve the measurement performance by compensating the intensity fluctuation of its light source.
Product Features
– User Convenience
All functions of existing PC software are installed in OPTIZEN Alpha, making it faster and more convenient.
– Incredible Speed
Fast and flexible software delivers the best result with analytical speeds up to 1.5 times that of existing products.
– Rapid Service
Quick services are available as OPTIZEN Alpha is made in Korea from design conception to manufacturing based on the unique technology of K LAB Co., Ltd.
– Extensive Scalability
OPTIZEN Alpha is designed for high-precision/high-resolution measurement in widebands from ultraviolet to visible light and can be used in various applications.
– Compact Size
Compact OPTIZEN Alpha enhances the efficiency of the experimental space.
– Sensuous Design
Now, you can enjoy a greater level of pleasure with a sensuous design.
Main Charateristics
– A world-class measurement performance
– Wide-size color screen (ALPHA: 8”)
– Various cell compatibility and fast cell type choice
– Automatic measurement of lots of samples by equipping multi-cell.
– Convenient voice service and volume control
– Emotional design -
BenchMasher 400 Labaratory Paddle Blender with incubation and UV Chamber Decon
The BenchMasher™ provides fast and effective mixing, ensuring consistent homogenization. It is ideal for preparation of samples were eliminating contamination is critical, such as pathogen and microbial detection in food and water filters. The BenchMasher also has applications anywhere larger solid samples need broken down or products such as powders and polymers need mixed.
OPTIONAL ACCESSORIES
•IPD4400-B400 400 ml Blender Bag, LDPE, 30x18cm, 10 packs of 50 bags
•IPD4400-B400F1 400ml Blender Bag, LDPE, 30x19cm, with lateral nylon side filter, 10 packs of 50 bags
•IPD4400-B400F2 400ml Blender Bag, LDPE, 30x19cm, with full nylon filter, 10 packs of 50 bags
