-
Aspirator Bottle, HDPE, carry handle, pc
• Aspirator Bottle, HDPE, carry handle
• 1 piece
VOLUMES AVAILABLE:
• BGH038, narrow neck, 25L
• BGH068, wide neck, 30L
• BGH070, wide neck, 50L -
Pasteur Pipettes, PE, pk/500
• Pasteur Pipettes, PE
• Pack of 500
GRAD AVAILABLE:
• PG-PAS1-00, 1ml grad
• PG-PAS3-00, 3ml grad -
Bottle, round, PP, WN
• Bottle, round, PP, wide neck
VOLUMES AVAILABLE:
• BWP0030PN, 30ml, 10/pk
• BWP0060PN, 60ml, 10/pk
• BLP0100P, 100ml, 10/pk
• BLP0150P, 150ml, 10/pk
• BWP0250P, 250ml, 10/pk
• BWP0500P, 500ml, 10/pk
• BWP1000P, 1L, 5/pk -
Thermometer, red spirit, 76mm imm, pc
• Thermometer, red spirit, 76mm immersion
• 1 piece
TEMPERATURE RANGE AVAILABLE:
• ZE-L0157: -10/110°C x 0.5°C
• ZE-L0137: -10/250°C x 2°C -
Volumetric Pipette, bulb, class A, pc
• Volumetric Pipette, bulb, class A, batch cert.
• 1 piece
VOLUMES AVAILABLE:
• 7100-1, 1ml
• 7100-2, 2ml
• 7100-5, 5ml
• 7100-10, 10ml
• 7100-25, 25ml
• 7100-50, 50ml
• 7100-100, 100ml -
Measuring Pipette, Mohr, class A, pc
• Measuring Pipette, Mohr, class A, batch cert.
• 1 piece
VOLUMES AVAILABLE:
• 7000-1, 1ml
• 7000-2, 1ml
• 7000-5, 5ml
• 7000-10, 10ml
• 7000-25, 25ml
• 7000-50, 50ml -
Disposable Syringes, sterile, luer lock tip, w/o needle
• Disposable Syringes, sterile, luer lock tip, w/o needle
SIZES AVAILABLE:
• TE-SS03L, 3ml, 100/box
• TE-SS05L, 5ml, 100/box
• TE-SS10L, 10ml, 100/box
• TE-SS20L, 20ml, 50/box
• TE-SS30L, 30ml, 50/box
• TE-SS50L, 50ml, 20/box -
Disposable Syringes, sterile, slip tip, w/o needle, box/100
• Disposable Syringes, sterile, slip tip, w/o needle
• Box of 100
SIZES AVAILABLE:
• TE-SS03S, 3ml
• TE-SS05S, 5ml
• TE-SS10S, 10ml -
Measuring Jug, PP, moulded grad, pc
• Measuring Jug, PP, moulded grad
• 1 piece
VOLUMES AVAILABLE:
• JPM0250P, 250ml
• JPM0500P, 500ml
• JPM1000P, 1L
• JPM2000P, 2L -
Measuring Cylinder, class A, amber, pc
• Measuring Cylinder, glass, class A, amber grad, batch cert.
• 1 piece
VOLUMES AVAILABLE:
• 3022-10: 10ml x 0.2ml
• 3022-25: 25ml x 0.5ml
• 3022-50: 50ml x 1.0ml
• 3022-100: 100ml x 1.0ml
• 3022-250: 250ml x 2.0ml
• 3022-500: 500ml x 5.0ml
• 3022-1L: 1L x 10.0ml
• 3022-2L: 2L x 20.0ml -
Beaker, tall form, grad, w/spout, pc
• Beaker, glass, tall form, grad, w/spout
• 1 piece
VOLUMES AVAILABLE:
• 1060-50: 50ml
• 1060-100: 100ml
• 1060-300: 300ml
• 1060-500: 500ml -
Beaker, low form, grad, w/spout, pc
• Beaker, glass, low form, grad, w/spout
• 1 piece
VOLUMES AVAILABLE:
• 1000-10: 10ml
• 1000-30: 30ml
• 1000-50: 50ml
• 1000-100: 100ml
• 1000-150: 150ml
• 1000-250: 250ml
• 1000-500:500ml
• 1000-1L: 1L
• 1000-2L: 2L
• 1000-5L: 5L -
Wash Bottle, WN, non-venting, 500ml, pk/5
• Wash Bottle, wide neck, non-venting, white closure, 500ml
• Pack of 5
OPTIONS AVAILABLE:
• WGW603PML: ‘Deionised water’
• WGW601PML: ‘Distilled water’ -
Wash Bottle, WN, venting, 500ml, pk/5
• Wash Bottle, wide neck, venting, 500ml
• Pack of 5
OPTIONS AVAILABLE:
• WGW539VTML: ‘Isopropanol’, blue closure
• WGW538VTML: ‘Methanol’, green closure
• WGW537VTML: ‘Acetone’, red closure
• WGW541VTML: ‘Ethanol’, orange closure -
D813 PVC Teat (PP530-10), pk/10
• PVC Teat (PP530-10)
• Pack of 10 -
BU435-12 Flask Brush, bristle, 50 x 100mm head, 380mm length, pc
• Flask Brush, bristle, 50 x 100mm head, 380mm length
• 1 piece -
RL-2021/1 Retort Clamp, 3-prong, rubber sleeves, holds to 90mm, pc
• Retort Clamp, 3-prong, rubber sleeves, holds to 90mm
• 1 piece
ACCESSORIES:
• U-CL90-01 Double Burette Clamp, holds 2 burettes (w/o base & rod), pc
• RL-3107/2 Retort Base, steel, blue acrylic, 200 x 125mm, pc
• RL-3108/22 Retort Rod, aluminium, 600 x 12.5mm dia, pc
• RL-2005/1 Bosshead, natural alloy, 16mm, pc
• RL-2021/1 Retort Clamp, 3-prong, rubber sleeves, holds to 90mm, pc -
RL-2005/1 Bosshead, natural alloy, 16mm, pc
• Bosshead, natural alloy, 16mm
• 1 piece
ACCESSORIES:
• U-CL90-01 Double Burette Clamp, holds 2 burettes (w/o base & rod), pc
• RL-3107/2 Retort Base, steel, blue acrylic, 200 x 125mm, pc
• RL-3108/22 Retort Rod, aluminium, 600 x 12.5mm dia, pc
• RL-2005/1 Bosshead, natural alloy, 16mm, pc
• RL-2021/1 Retort Clamp, 3-prong, rubber sleeves, holds to 90mm, pc -
RL-3108/22 Retort Rod, aluminium, 600 x 12.5mm dia, pc
• Retort Rod, aluminium, 600 x 12.5mm dia.
• 1 piece
ACCESSORIES:
• U-CL90-01 Double Burette Clamp, holds 2 burettes (w/o base & rod), pc
• RL-3107/2 Retort Base, steel, blue acrylic, 200 x 125mm, pc
• RL-3108/22 Retort Rod, aluminium, 600 x 12.5mm dia, pc
• RL-2005/1 Bosshead, natural alloy, 16mm, pc
• RL-2021/1 Retort Clamp, 3-prong, rubber sleeves, holds to 90mm, pc -
RL-3107/2 Retort Base, steel, blue acrylic, 200 x 125mm, pc
• Retort Base, steel, blue acrylic, 200 x 125mm
• 1 piece
ACCESSORIES:
• U-CL90-01 Double Burette Clamp, holds 2 burettes (w/o base & rod), pc
• RL-3107/2 Retort Base, steel, blue acrylic, 200 x 125mm, pc
• RL-3108/22 Retort Rod, aluminium, 600 x 12.5mm dia, pc
• RL-2005/1 Bosshead, natural alloy, 16mm, pc
• RL-2021/1 Retort Clamp, 3-prong, rubber sleeves, holds to 90mm, pc -
U-CL90-01 Double Burette Clamp, holds 2 burettes (w/o base & rod), pc
• Double Burette Clamp, holds 2 burettes (w/o base & rod)
• 1 piece
ACCESSORIES:
• U-CL90-01 Double Burette Clamp, holds 2 burettes (w/o base & rod), pc
• RL-3107/2 Retort Base, steel, blue acrylic, 200 x 125mm, pc
• RL-3108/22 Retort Rod, aluminium, 600 x 12.5mm dia, pc
• RL-2005/1 Bosshead, natural alloy, 16mm, pc
• RL-2021/1 Retort Clamp, 3-prong, rubber sleeves, holds to 90mm, pc -
SWP033 Pipette Stand, blue, PP, holds 94 vertically, pc
• Pipette Stand, blue, PP, holds 94 vertically
• 1 piece -
PP852-10 Universal Safety Pipette Filler, rubber, pc
• Universal Safety Pipette Filler, rubber
• 1 piece -
TE-SS01T Disposable Syringes, sterile, tuberculin, slip tip, 1ml, w/o needle, box/100
• Disposable Syringes, sterile, tuberculin, slip tip, 1ml, w/o needle
• Box of 100 -
NE-7005 Beaker Tongs, silicone sleeves, 356mm, pc
• Beaker Tongs, silicone sleeves, 356mm
• 1 piece -
WGW236P Wash Bottle, WN, sq/sh, white closure, 500ml, pk/5
• Wash Bottle, wide neck, sq/sh, non-venting, white closure, 500ml
• Pack of 5 -
AU680 Clinical Chemistry Analyzer [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The AU680 clinical chemistry analyzer gives mid- to high-volume laboratories the flexibility to improve efficiencies and economics their way. Operate the AU680 as a standalone system or connect it to laboratory automation and IT solutions. With throughput of up to 800 photometric tests per hour (up to 1,200 with ISEs) and 63 onboard parameters, the AU680 clinical chemistry analyzer delivers field-proven reliability and efficiency to laboratories around the world.
System includes:
- Analyzer
- Sampler
- Computer rack
-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
47 mm Polysulfone Filter Holder
Please contact us for price.
– Can be used aseptically
– Recessed filter support provides sufficient clearance so that the membrane will not twist or tear when the funnel is secured
– Graduated funnel in 300 mL (standard) or 500 mL (wide mouth) capacities
– Receiver flask (KP-47S) is interchangeable with all other models
– Funnel cover can be vented aseptically using disposable syringe filter
Product 47 mm Polysulfone Filter Holder Model KP-47H KP-47U KP-47W KP-47S KP-47T Filter Dimension ⌀47 mm Prefilter Dimension ⌀41 mm Filtration Area 13.5 cm² Funnel Capacity 300 mL 500 mL 300 mL 800 mL Receiver Capacity – 300 mL – Dimension ⌀75 x 185 mm ⌀78 x 203 mm ⌀105 x 183 mm ⌀92 x 274 mm ⌀105 x 240 mm Max Operating Temperature 80°C (Autoclaving possible at 121°C, 20mins) Field Food, medicine and cosmetic -
Yellow Biohazard Waste Bags, 30″x36″ (5000pcs)
Yellow BMW waste bags, Size 30″x36″, Thickness 55Microns, 100% Virgin, Non Chlorinated, 5000 PCS
-
AGScientific H-1012-DI HYGROMYCIN B IN DI WATER
31282-04-9
527.5
C20H37N3O13
Water
2-8°C
Concentration: 100 mg/mL
PACKING AVAILABLE:
- H-1012-DI-5X2ML: 5×200 mg (5×2 mL)
- H-1012-DI-1X10ML: 1X1 g (1X10 mL)
-
CryoKING Multi-Coded Cryogenic Vials, 5.0ml, External Thread
Features:
- Material: Polypropylene
- Sterile
- For storage of biological materials in mechanical freezers or in the vapor phase of liquid Nitrogen
- Not Autoclavable
- Screw Cap
- Externally threaded vials with HDPE closures for aseptic technique,
- Packing: 25 Sets/ Bag, 20 Bags/Pack, 2 Packs/Case
COLOURS AVAILABLE:
- 88-6501: Red
- 88-6502: Green
- 88-6503: Blue
- 88-6504: Yellow
- 88-6505: Purple
-
CryoKING CKS-5008 8-Channel Decapper (for external thread tube)
Features:
● Easy-to-use design: Caps or decaps 8 tubes in an individual line. One-hand operation
● Convenient operation: Improves processing throughput of manual procedures with automated column-wise decapping and capping in just 3 seconds
● Optimal torque level: Ensures reproducibility by capping decapping all tubes to the optimal torque level
● Ergonomic design: Light weight, easy-to-use and ergonomic design
● Extra-long standby time: Enhances the convenience of actual operation
● Low noise: Enables the capping /decapping noise less than 5 decibels -
Half-Skirt 96 Wells PCR Plates
Features:
- Pre-sterilized, Free of RNase and DNase, No human DNA, No pyrogenic
- Autoclavable
- Packing: 15 PCS/box, 10 Boxes/Case
OPTIONS AVAILABLE:
- B96HS-01N: 0.1mL, Nature
- B96HS-01W: 0.1mL, White (specially designed for LightCycler® 480)
- B96HS-02N: 0.2mL, Nature, Cuttable
- B96HS-02W: 0.2mL, White, Cuttable
- A96WS-02N: 0.2mL, Nature
- A96WS-02W: 0.2mL, White
- A96WS-02PN: 0.2mL, Nature, Graduated
- T96HS-02N: 0.2mL, Nature, Raised sides
-
Non-Skirt 96 wells PCR Plates
Features:
- Pre-sterilized, Free of RNase and DNase, No human DNA, No pyrogenic
- Fully autoclavable at 121°C.
- Packing: 15 PCS/box, 10 Boxes/Case
OPTIONS AVAILABLE:
- B96NS-01N: 0.1mL, Nature
- B96NS-01W: 0.1mL, White
- B96NS-02N: 0.2mL, Nature
- B96NS-02W: 0.2mL, White
-
Sealing film for PCR plates
Type:
- QPCR96F-1: High transparent sealing films for PCR plates, Transparent, pressure sensitive, 100PCS/BOX
- PCR96F: Common Sealing Films for Plates, Transparent, self-adhesive, 100PCS/BOX
- AF00001: Aluminum Sealing Films for Plates, non-permeable, medical-grade acrylic adhesive, 100PCS/BOX
-
Vista-ER Vista with Embedded Essentials-ER Software
– Provides a standalone transmittance colour measurement solution designed to help users achieve FDA CFR 21 Part 11 compliance
– This standaline solution eliminates the need for users to purchase external ER compliant software and computer solutions
– The user can also purchase the Validation and Compliance Solution (DQNB) that helps validate the instrument and software procedure