-
Longer Pump BT300-2J [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Medium Flow Rate Peristaltic Pump BT300-2J could be loaded with YZ1515X, YZ2515X, YZII15, YZII25 and DG15-24. The pump provides flow rates from 0.07mL/min to 1140 mL/min. The speed could be controlled through control panel, external control interface or RS485 interface. The running parameters are saved automatically. And the pump could be operated easily. -
MS110 microbial shaking incubator
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.
MODEL:
• MS110 microbial shaking incubator
OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
SM798R Floor-Standing High Capacity Grinder (with Freezing)
For grinding samples, it is a grinder with freezing function.
-
SM798 Floor-Standing High Capacity Grinder
For grinding samples, it is a floor-standing high capacity grinder.
-
C3310-0500, TransfMEM
TransfMEM-α Reduced Serum Medium. Pkg size: 500 ml/bottle
-
C3560-0500, Water, Cell Culture
Water, Cell Culture Grade
-
C3530-0100, Trypsin-EDTA solution A
Trypsin EDTA Solution A (0.25%), EDTA (0.02%), with Phenol Red
-
C3730-0100, Trypan Blue
Trypan Blue Solution, 5mg/ml in Saline
-
C3590-0500, dPBS, without Ca and Mg
Vivacell dPBS, without Ca and Mg, 500 ml/bottle <Amb Storage>
-
C3490-1000, Anti-mycoplasma, fungal, virus and bacterial spray (1L)
Pharmacidal, for disinfecting surfaces. Pkg size: 1 litre/bottle
-
C3490-0100, Anti-mycoplasma, fungal, virus and bacterial spray (100ml)
Pharmacidal, for disinfecting surfaces. Pkg size: 100 ml/bottle
-
C3481-0050, Aquaguard 2
Aquaguard-2 (Ordinary Water Baths)-Former: BI: 01-916-1E
-
C3480-0100, Aquaguard 1
Aquaguard-1 (Water-Baths in CO2 Incubators)-Former: BI: 01-867-1B
-
MS86 microbial shaking incubator
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• MS86 microbial shaking incubatorOPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
CS315 CO2 shaking incubator (refrigerated)
For shaking culture of cell , it’s UV sterilization CO2 shaking incubator.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• CS315 CO2 shaking incubator(refrigerated)OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
C240/ C240P 245L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 245L volume.
MODEL:
• C240: 140℃ high heat sterilization
• C240P: 180℃ high heat sterilization -
C80/ C80P 85L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 85L volume.
MODEL:
• C80: 140℃ high heat sterilization
• C80P: 180℃ high heat sterilization -
C180/ C180P 180L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 185L volume.
MODEL:
• C180: 140℃ high heat sterilization
• C180P: 180℃ high heat sterilization -
MS315/MS315T microbial shaking incubator (refrigerated)
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• MS315 button screen microbial shaking incubator (refrigerated)• MS315T touch screen microbial shaking incubator (refrigerated)OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
39400-2E Cryovial, Internal thread with Silicone washer seal, 2.0mL, Self-standing
*Special price valid while stock last.
1. Made from special polypropylene for storing biological material or cells at temperatures as low as -196°.(only in the gas phase of liquid nitrogen)
2. Packing: 100/bag, 10 bags/case
-
GX-224A Advanced Analytical Balance, 220g x 0.0001g with Internal Calibration
Advanced Sensor Technology
Smart SHS® is the latest advancement in our super hybrid design, construction and algorithms.
•Increased productivity via faster stabilization times (1 second in fast mode)
•Lower cost of ownership due to reduce number of parts and maintenance accessibility
Innovative Solutions
Electronically Controlled Load (ECL) does a self-diagnostic before performing an internal repeatability test without an external weight, all in less than a minute and a half.
•Dia-Check – the diagnostic result that validates if the balance critically passes or fails
•SD – standard deviation that allows for daily precision check, ideal for S.O.P.s
•QuickMin-S – determines minimum sample weight in any given environment
•Min-S Alert – alerts user to ensures they are operating within USP41 compliance
Impact Shock Detection (ISD)
•Impact-alert visually and audibly indicates the magnitudes of impact shocks
•Shock-log documents date, time, and shock level
Flow Rate Display (FRD)
Helps streamline and improve filling or dosing accuracy and precision.
•FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density
•FR-Compare – comparator that provides feedback if the flow rate is within limits
Good Data Management
•Internal/external calibration with easy one-touch button – performs and documents internal calibration
•Automatic Self-Calibration (ASC) – auto calibrates based on temperature and time interval
•Password-Protect – offers password-protection up to 11 users and 1 administrator
•GLP/GMP/GCP Compliance with full calibration reports
Leveling Made Easy
•Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination
•Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet
Simple User and Data Interface
•Six straightforward keys – ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO
•Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility
•Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional)
Cleanable Robust Construction
•Stainless steel pan and dust-plate can be easily removed for cleaning
•Easy to assemble anti-static breeze break on 0.001 readability models
•Die-cast aluminum housing provides extra stability and durability -
91696Opk Reversible Racks for Microtube, Polypropylene 96-well
91696Opk Reversible microtube rack, 1.5/2.0ml + 0.5/0.7ml, 96-well , orange (1/bag)
Reversible Racks for Microtube,Polypropylene and 96-well
1. Manufactured in Heavy-duty Polypropylene.
2. One side is designed to hold 1.5ml/2.0ml tubes,the other side holds 0.5ml/0.7ml tubes.
3. Racks are molded numbered on the surface for easy samples identification.
4. Idea for Freezing.Temperature range-80℃ to 121℃.Suitable for autoclaving at 121℃. -
Cryovial Storage Boxes for 1ml And 2ml Tubes, Polycarbonate
91300pk Cryovial storage box, PC, 100-well, Green color (10 racks)
Cryovial Storage Boxes for 1ml and 2ml Tubes, Polycarbonate
1. Manufactured in Polycarbonate provide ultra low temperature storage from -196℃ to 121℃
2. Fitting for storage of Cryovials from 1.0ml to 2.0ml in Liquid Nitrogen or Freezer
3. Alphanumeric grid on lid for easy identification of samples
4. With Air vents for storage of freezing
5. Covers are keyed to the base to prevent misalignment, with transparent cover and moverable grid.
6. Measurement: 10×10 Array box, measurement: 130 x 130 x 53mm(LxWxH,mm) -
Culture Tubes, Round Bottom,with Dual-position Cap,Graduated
Disposable Culture Tubes, Round Bottom, Rimed,with Dual-position Cap,with Graduation
1. Made of ultra clear virgin polypropylene or virgin polystyrene
2. Polystyrene tubes are transparent. Polypropylene tubes are opaque, break-resistant.
3. 12x75mm Polystyrene tubes can withstand centrifugation up to 1400xg and temperature at 80°C; Polypropylene tubes can be 3000xg and 120°C
4. 17x100mm Polystyrene tubes can withstand centrifugation up to 3000xg and temperature at 80°C; Polypropylene tubes can be 5500xg and 120°C
*Available with Printed Graduations and large white marking area for easy labelling.
Dual-position cap:
-Vented for aerobic cultures work
-Sealed for anaerobic cultures work
OPTIONS:
•82142: 12x75mm, 4mL, PS, 25/peel bag, 40 bags/case
•82442: 17x100mm, 12mL, PP, 25/peel bag, 40 bags/case