-
Longer Pump BT300-2J [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Medium Flow Rate Peristaltic Pump BT300-2J could be loaded with YZ1515X, YZ2515X, YZII15, YZII25 and DG15-24. The pump provides flow rates from 0.07mL/min to 1140 mL/min. The speed could be controlled through control panel, external control interface or RS485 interface. The running parameters are saved automatically. And the pump could be operated easily. -
Mini Vortex Mixer
Crystal Technology and Industries’ Mini Vortex Mixer is the ideal Vortex Mixer for every lab with its compact size, ease of use, and its economic price point. The 3,000 rpm fixed speed ensures proper mixing and accurate results.
MODEL:
• VM-03UW( with Blue Top)
• VM-03RUW( with Red Top)
• VM-03GUW (with Green Top)
• VM-03PUW (with Purple Top) -
C3310-0500, TransfMEM
TransfMEM-α Reduced Serum Medium. Pkg size: 500 ml/bottle
-
C3560-0500, Water, Cell Culture
Water, Cell Culture Grade
-
C3530-0100, Trypsin-EDTA solution A
Trypsin EDTA Solution A (0.25%), EDTA (0.02%), with Phenol Red
-
C3730-0100, Trypan Blue
Trypan Blue Solution, 5mg/ml in Saline
-
C3590-0500, dPBS, without Ca and Mg
Vivacell dPBS, without Ca and Mg, 500 ml/bottle <Amb Storage>
-
C3490-1000, Anti-mycoplasma, fungal, virus and bacterial spray (1L)
Pharmacidal, for disinfecting surfaces. Pkg size: 1 litre/bottle
-
C3490-0100, Anti-mycoplasma, fungal, virus and bacterial spray (100ml)
Pharmacidal, for disinfecting surfaces. Pkg size: 100 ml/bottle
-
C3481-0050, Aquaguard 2
Aquaguard-2 (Ordinary Water Baths)-Former: BI: 01-916-1E
-
C3480-0100, Aquaguard 1
Aquaguard-1 (Water-Baths in CO2 Incubators)-Former: BI: 01-867-1B
-
39400-2E Cryovial, Internal thread with Silicone washer seal, 2.0mL, Self-standing
*Special price valid while stock last.
1. Made from special polypropylene for storing biological material or cells at temperatures as low as -196°.(only in the gas phase of liquid nitrogen)
2. Packing: 100/bag, 10 bags/case
-
GX-224A Advanced Analytical Balance, 220g x 0.0001g with Internal Calibration
Advanced Sensor Technology
Smart SHS® is the latest advancement in our super hybrid design, construction and algorithms.
•Increased productivity via faster stabilization times (1 second in fast mode)
•Lower cost of ownership due to reduce number of parts and maintenance accessibility
Innovative Solutions
Electronically Controlled Load (ECL) does a self-diagnostic before performing an internal repeatability test without an external weight, all in less than a minute and a half.
•Dia-Check – the diagnostic result that validates if the balance critically passes or fails
•SD – standard deviation that allows for daily precision check, ideal for S.O.P.s
•QuickMin-S – determines minimum sample weight in any given environment
•Min-S Alert – alerts user to ensures they are operating within USP41 compliance
Impact Shock Detection (ISD)
•Impact-alert visually and audibly indicates the magnitudes of impact shocks
•Shock-log documents date, time, and shock level
Flow Rate Display (FRD)
Helps streamline and improve filling or dosing accuracy and precision.
•FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density
•FR-Compare – comparator that provides feedback if the flow rate is within limits
Good Data Management
•Internal/external calibration with easy one-touch button – performs and documents internal calibration
•Automatic Self-Calibration (ASC) – auto calibrates based on temperature and time interval
•Password-Protect – offers password-protection up to 11 users and 1 administrator
•GLP/GMP/GCP Compliance with full calibration reports
Leveling Made Easy
•Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination
•Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet
Simple User and Data Interface
•Six straightforward keys – ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO
•Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility
•Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional)
Cleanable Robust Construction
•Stainless steel pan and dust-plate can be easily removed for cleaning
•Easy to assemble anti-static breeze break on 0.001 readability models
•Die-cast aluminum housing provides extra stability and durability -
91696Opk Reversible Racks for Microtube, Polypropylene 96-well
91696Opk Reversible microtube rack, 1.5/2.0ml + 0.5/0.7ml, 96-well , orange (1/bag)
Reversible Racks for Microtube,Polypropylene and 96-well
1. Manufactured in Heavy-duty Polypropylene.
2. One side is designed to hold 1.5ml/2.0ml tubes,the other side holds 0.5ml/0.7ml tubes.
3. Racks are molded numbered on the surface for easy samples identification.
4. Idea for Freezing.Temperature range-80℃ to 121℃.Suitable for autoclaving at 121℃. -
Cryovial Storage Boxes for 1ml And 2ml Tubes, Polycarbonate
91300pk Cryovial storage box, PC, 100-well, Green color (10 racks)
Cryovial Storage Boxes for 1ml and 2ml Tubes, Polycarbonate
1. Manufactured in Polycarbonate provide ultra low temperature storage from -196℃ to 121℃
2. Fitting for storage of Cryovials from 1.0ml to 2.0ml in Liquid Nitrogen or Freezer
3. Alphanumeric grid on lid for easy identification of samples
4. With Air vents for storage of freezing
5. Covers are keyed to the base to prevent misalignment, with transparent cover and moverable grid.
6. Measurement: 10×10 Array box, measurement: 130 x 130 x 53mm(LxWxH,mm) -
Culture Tubes, Round Bottom,with Dual-position Cap,Graduated
Disposable Culture Tubes, Round Bottom, Rimed,with Dual-position Cap,with Graduation
1. Made of ultra clear virgin polypropylene or virgin polystyrene
2. Polystyrene tubes are transparent. Polypropylene tubes are opaque, break-resistant.
3. 12x75mm Polystyrene tubes can withstand centrifugation up to 1400xg and temperature at 80°C; Polypropylene tubes can be 3000xg and 120°C
4. 17x100mm Polystyrene tubes can withstand centrifugation up to 3000xg and temperature at 80°C; Polypropylene tubes can be 5500xg and 120°C
*Available with Printed Graduations and large white marking area for easy labelling.
Dual-position cap:
-Vented for aerobic cultures work
-Sealed for anaerobic cultures work
OPTIONS:
•82142: 12x75mm, 4mL, PS, 25/peel bag, 40 bags/case
•82442: 17x100mm, 12mL, PP, 25/peel bag, 40 bags/case -
Conical-bottom centrifuge tube
*Special price valid while stock last.
Conical-bottom Centrifuge tubes,Polypropylene
1. These conical-bottom tubes are made of ultra-clear polypropylene
2. Cap Materials: HDPE
3. Leakproof (-95kPa, 14 psi)
4. White printed graduations with large marking strip for labeling
5. DNa/RNa free, Non-pyrogenic
Volume:
- 34117F: 15ml 50tubes/pack, 10 packs/case
- 32104F: 50mL, 25tubes/pack, 20 packs/case
-
-
190 L Stackable Magnetic Drive Incubator Shaker
The CO₂ Incubator Shaker features Temperature, Shaking, CO2 Concentration, and Humidity controls. Its’ stackable design helps maximize floor space, with the capability to stack up to three units high.MODEL:• IS-AMW(Ф26mm, without CO2)• IS-ACMW( (Ф26mm, with CO2)• IS-A5CMW(Ф50mm, with CO2)OPTIONAL ACCESSORIES:•IS-A1 50ML flask clamp
•IS-A2 100ML flask clamp
•IS-A3 150ML flask clamp
•IS-A4 200ML flask clamp
•IS-A5 250ML flask clamp
•IS-A6 500ML flask clamp
•IS-A7 1000ML flask clamp•IS-A8 2000ML flask clamp
•IS-A9 3000ML flask clamp
•IS-A10 5000ML flask clamp
•IS-A50 25ML flask clamp
•IS-A11 Test Tube Rack, 40 hole ¢14mm for 5ml tube•IS-A12 Test Tube Rack,40 hole¢16mm for 10ml tube
•IS-A23 Test Tube Rack, 40 hole¢18mm for 15ml tube
•IS-A24 Test Tube Rack, 27 hole¢22mm for 20ml tube
•IS-A42 Test Tube Rack, 21 hole¢30mm for 50ml tube
•IS-A20 Adjustable test tube rack,40 hole¢14mm for 5ml tube•IS-A21 Adjustable test tube rack,40 hole¢16mm for 10ml tube
•IS-A30 Adjustable test tube rack,40 hole¢18mm for 15ml tube
•IS-A31 Adjustable test tube rack,27 hole¢22mm for 20ml tube
•IS-A32 Adjustable test tube rack,21 hole¢30mm for 50ml tube
•IS-A37 Adjustable test tube rack,24 hole¢30mm, for 300mm length tube•IS-A13 96-Well Microplate Holder, Microplate Holer, can be mounted on platform of shakers
•IS-A35 Holder for Separating Funnel, Used for seperating funnel w/volume greater than 500ml;
•IS-A33 Infusion Bottle Clamp,500ml•IS-A34 Infusion Bottle Clamp, 1000ml
•IS-A47 Sticky Pad, WxD:140x140mm
•IS-A62 Rack for Stacking Incubator Shakers
•IS-A63 Multifunction Spring PlatformWxDxH:899x539x81mm;
•IS-A71 Automatic replenisher, Automatically refill water to humidity tray•IS-A72 RH Control system, including a water replenisher and humidity controller, which could keep the humidity in the chamber at the setting value.
•IS-A90 Water tank WxDxH:240x240x449mm;Used with IS-A71/A72;Capacity: 15L
•IS-A64 Remote Monitoring & Control System,Incl. advanced monitoring system and software for mobile phone -
191 L Dry-heat Air-jacketed CO2 Incubator
Crystal CO incubator uses high efficiency filter and the latest high temperature dry heat sterilization or damp heatsterilization technology, reduce the greatest degree of pollution while culturing; The high precision microcomputercontrol system ensures the high accuracy and uniformity of temperature and CO concentration in the chamber.The instrument is widely used in modern medical diagnosis and other fields.MODEL:• CI-191CW (Press-button)• CI-191CXW (Touch-screen)• CI-191CHXW(Touch-screen with humidity control)OPTIONAL ACCESSORIES:• CIA13 Chamber HEPA Filter,HEPA,φ140x44mm, replacement cycle: one year• CIA15 CO2 Inlet Filter,Inlet HEPA filter, φ54x53mm• CIA12 Standard shelf, 13kg• CIA24 Heavy Duty shelf, 24kg• CIA25 CO2 regulator• CIA19 Remote Monitoring for CO2 incubator -
Top-Hinge Incubator Shaker IS-RDD3W / IS-RSD3W
Crystal’s Technology and Industries versatile Benchtop incubator shakers with optional refrigeration (IS-RDD3W has a built-in refrigeration module with auto-defrost) are designed to provide an optimal environment to safely shake flasks, tubes racks, and micro-plates. These incubators are quiet, easy to operate, and convenient to load. Incubator Shakers are ideal for cell culture, solubility studies, extraction procedures, protein expression, and many other applications.MODEL:• IS-RDD3W(with cooling)• IS-RSD3W(without cooling)OPTIONAL ACCESSORIES:•IS-A1 50ML flask clamp
•IS-A2 100ML flask clamp
•IS-A3 150ML flask clamp
•IS-A4 200ML flask clamp
•IS-A5 250ML flask clamp
•IS-A6 500ML flask clamp
•IS-A7 1000ML flask clamp•IS-A8 2000ML flask clamp•IS-A11 Test Tube Rack, 40 hole ¢14mm for 5ml tube
•IS-A12 Test Tube Rack,40 hole¢16mm for 10ml tube
•IS-A23 Test Tube Rack, 40 hole¢18mm for 15ml tube
•IS-A24 Test Tube Rack, 27 hole¢22mm for 20ml tube•IS-A20 Adjustable test tube rack,40 hole¢14mm for 5ml tube
•IS-A21 Adjustable test tube rack,40 hole¢16mm for 10ml tube
•IS-A30 Adjustable test tube rack,40 hole¢18mm for 15ml tube
•IS-A31 Adjustable test tube rack,27 hole¢22mm for 20ml tube
•IS-A32 Adjustable test tube rack,21 hole¢30mm for 50ml tube•IS-A37 Adjustable test tube rack,24 hole¢30mm, for 300mm length tube
•IS-A13 96-Well Microplate Holder, Microplate Holer, can be mounted on platform of shakers•IS-A47 Sticky Pad, WxD:140x140mm•IS-A19 Multifunction Spring Platform,WxDxH:165x165x80mm;•IS-A27 Multifunction Spring Platform, WxDxH:350x240x80mm