-
8-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-B10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-B300: Volume Range: 50-300 μL, Increment: 1 μL
•SPIP-B1000: Volume Range: 100-1000 μL, Increment: 5 μL -
Single-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-2.5: Volume Range: 0.1-2.5 μL, Increment: 0.05 μL
•SPIP-10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-20: Volume Range: 2-20 μL, Increment: 0.1 μL
•SPIP-100: Volume Range: 10-100 μL, Increment: 1 μL
•SPIP-200: Volume Range: 20-200 μL, Increment: 1 μL
•SPIP-1000: Volume Range: 100-1000 μL, Increment: 5 μL
•SPIP-5000: Volume Range: 1000-5000 μL, Increment: 50 μL
•SPIP-10000: Volume Range: 1-10 mL, Increment: 100 μL -
Cell Factory, TC Treated, Sterile , Vent cap
Features:
•Medical-grade transparent polystyrene (PS) material that complies with USPVI. And the heat treatment process combined with injection molding is adopted to make the product have good toughness, and it is not easy to be damaged during transportation and transfer.
•The cell factory adopts a self-developed surface modification process, which has strong hydrophilicity and better cell adhesion performance.
•C-level purification workshop production, the production process conforms to the ISO13485 quality management system, professional fully automatic production line, the product has passed the three-level sealing test before leaving the factory to ensure that the product sealing is 100% qualified.
•With a perfect quality management system, each batch has undergone a performance test to ensure the consistency and stability of product performance between different batches.
•The double-big mouth design improves the speed of filling and harvesting liquid, and is not easy to generate air bubbles, which is conducive to gas exchange and
high-density cell culture.
•The cell factory is equipped with a complete set of sealed pipeline system, which provides two pipeline forms of thermoplastic tube or silicone tube, which can be connected with the pipeline of the liquid inlet system and the harvest system, and the liquid is carried out through a peristaltic pump or a pressure system. input and output.
•The cell factory is equipped with a fast-switching sealing cover (patented product), which can switch between airtight and airtight states in a conventional
environment (greenhouse), meeting the needs of dissolved oxygen and exhaust in different culture stages of cells and viruses.
•The finished cell factory has passed the tests of the third-party testing agency (SGS) ISO10993-10, USP87 and the United States Pharmacopoeia, and has no
sensitization, no hemolytic, no pyrogen and no cytotoxicity, etc.
OPTIONS AVAILABLE:
•JT85301: 1 layer, 635cm², 1 pc/ bag, 8 pcs/ carton
•JT85302: 2 layers, 1270cm², 1 pc/ bag, 8 pcs/ carton
•JT85303: 5 layers, 3175cm², 1 pc/ bag, 6 pcs/ carton
•JT85304: 10 layers, 6350cm², 1 pc/ bag, 4 pcs/ carton -
Screw Cap Micro Tube, -80℃~120℃, O-ring, Clear, Sterile
Features:
•Unique external screw cap design ensures excellent airtightness.
•Maximum withstand high heart force: 20000RCF.
•The bottom can be vertically designed to facilitate the vertical placement of samples.
•The wall thickness is precisely controlled, and it maintains excellent stability in the temperature range of -80C -121%C.
•No DNase, RNase, no pyrogen.
VOLUMES AVAILABLE:
•JT201500: 0.5mL, 500 pcs/pack, 10 packs/case
•JT201501: 1.5mL, 500 pcs/pack, 5 packs/case
•JT201502: 2mL, 500 pcs/pack, 5 packs/case -
Erlenmeyer Flask, Vent Cap, PC, Sterile
Features:
•Flat-bottom Erlenmeyer flasks save preparation time and avoid the risk of cross-contamination. Precise scale marks for easy observation. The vented cap ensures gas circulation, while the ventilated and water-tight features ensure that the culture medium does not leak out.
•Electron beam sterilizable, reusable
•Production in clean environment, DNase/RNase free
VOLUMES AVAILABLE:
•JT301125-1: 125mL, 1 pcs/pack, 24packs/case
•JT301250-1: 250mL, 1 pcs/pack, 12packs/case
•JT301500-1: 500mL, 1 pcs/pack, 12packs/case
•JT301000-1: 1000mL, 1 pcs/pack, 12packs/case -
Cell Culture Dish, TC Treated, Friendly Handling, Sterile
Features:
•The new saw edge design is convenient for the user to take the whole plant stably, or take out a plant from the stack of multiple plants. The bottom is flat and transparent, and it will not be optically distorted and deformed under the microscope.
•Special TC treatment on the culture surface, excellent cell adhesion
•Cover ventilation grid design to ensure gas exchange
•No pyrogen, no endotoxin
OPTIONS AVAILABLE:
•JT101035: 35mm, 20 pcs/pack, 25 packs/ctn
•JT101060: 60mm, 20 pcs/pack, 25 packs/ctn
•JT101100: 100mm, 10 pcs/pack, 30 packs/ctn
•JT101150: 150mm, 10 pcs/pack, 8 packs/ctn -
Cell Culture Plate, TC Treated, Sterile
Features:
•Based on multi-well parallel culture, JJTECH provides cell culture plates with different specifications of 6, 12, 24, 48 and 96 wells. All culture plates are made of highly permeable high -quality polystyrene, not only the space of the culture wells is highly consistent, but the whole plate is also highly flat.
•The dimensions of the cell culture plate strictly follow the requirements of the ANSI/SLAS standard, and can be used for instrument operation and analysis that meet this standard.
•The product features are as follows: In order to facilitate the addition of samples in the well, letters and numbers are marked on the edge of the groove and in the gap of the culture well.
•Independent groove design reduces the risk of pipetting contamination.
•The non-slip design of the base helps to take out the entire culture plate smoothly, and the transparent side wall can be used for visual inspection of the sample in the well.
•The ventilation pattern inside the lid and the design of the condensation ring, both of which together ensure a stable gas exchange and minimize evaporation.
•Packing: 1 pcs/pack, 50 packs/ctn
OPTIONS AVAILABLE:
•JT100386A: 6 wells
•JT100312A: 12 wells
•JT100324A: 24 wells
•JT100348A: 48 wells
•JT100396A: 96 wells -
Cell Culture Flask, Vent Cap, TC Treated, Sterile
Features
•Cell scrapers and serum pipettes can reach any drop. There are eye-catching writing areas on both sides of the bottle neck, and scales are printed on both sides, which is easy to use.
•The anti-rollover design of the bottle body reduces the risk of contamination. In addition, stacking edges ensure stability when stacked.
•Optimized sloping neck and anti-drip rim reduce the risk of contamination from media spillage and allow for safer pouring.
•Aseptic ziplock bag packaging
•High Definition, Polystyrene Material
•Frosted writable area on bottle side, graduations on both sides
•Stacking design is not easy to slip, easy to stack
•Electron Beam Sterilization
•No pyrogen, no endotoxin, no cytotoxicity
CULTIVATION AREA AVAILABLE:
•JT102025: T25, 25cm², 10pcs/pack, 20pack/carton
•JT102075: T75, 75cm², 5pcs/pack, 20pack/carton
•JT102175: T175, 175cm², 5pcs/pack, 10pack/carton
•JT102275: T225, 225cm², 5pcs/pack, 5pack/carton -
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile.