-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
39400-2E Cryovial, Internal thread with Silicone washer seal, 2.0mL, Self-standing
*Special price valid while stock last.
1. Made from special polypropylene for storing biological material or cells at temperatures as low as -196°.(only in the gas phase of liquid nitrogen)
2. Packing: 100/bag, 10 bags/case
-
91696Opk Reversible Racks for Microtube, Polypropylene 96-well
91696Opk Reversible microtube rack, 1.5/2.0ml + 0.5/0.7ml, 96-well , orange (1/bag)
Reversible Racks for Microtube,Polypropylene and 96-well
1. Manufactured in Heavy-duty Polypropylene.
2. One side is designed to hold 1.5ml/2.0ml tubes,the other side holds 0.5ml/0.7ml tubes.
3. Racks are molded numbered on the surface for easy samples identification.
4. Idea for Freezing.Temperature range-80℃ to 121℃.Suitable for autoclaving at 121℃. -
Cryovial Storage Boxes for 1ml And 2ml Tubes, Polycarbonate
91300pk Cryovial storage box, PC, 100-well, Green color (10 racks)
Cryovial Storage Boxes for 1ml and 2ml Tubes, Polycarbonate
1. Manufactured in Polycarbonate provide ultra low temperature storage from -196℃ to 121℃
2. Fitting for storage of Cryovials from 1.0ml to 2.0ml in Liquid Nitrogen or Freezer
3. Alphanumeric grid on lid for easy identification of samples
4. With Air vents for storage of freezing
5. Covers are keyed to the base to prevent misalignment, with transparent cover and moverable grid.
6. Measurement: 10×10 Array box, measurement: 130 x 130 x 53mm(LxWxH,mm) -
Culture Tubes, Round Bottom,with Dual-position Cap,Graduated
Disposable Culture Tubes, Round Bottom, Rimed,with Dual-position Cap,with Graduation
1. Made of ultra clear virgin polypropylene or virgin polystyrene
2. Polystyrene tubes are transparent. Polypropylene tubes are opaque, break-resistant.
3. 12x75mm Polystyrene tubes can withstand centrifugation up to 1400xg and temperature at 80°C; Polypropylene tubes can be 3000xg and 120°C
4. 17x100mm Polystyrene tubes can withstand centrifugation up to 3000xg and temperature at 80°C; Polypropylene tubes can be 5500xg and 120°C
*Available with Printed Graduations and large white marking area for easy labelling.
Dual-position cap:
-Vented for aerobic cultures work
-Sealed for anaerobic cultures work
OPTIONS:
•82142: 12x75mm, 4mL, PS, 25/peel bag, 40 bags/case
•82442: 17x100mm, 12mL, PP, 25/peel bag, 40 bags/case -
Conical-bottom centrifuge tube
*Special price valid while stock last.
Conical-bottom Centrifuge tubes,Polypropylene
1. These conical-bottom tubes are made of ultra-clear polypropylene
2. Cap Materials: HDPE
3. Leakproof (-95kPa, 14 psi)
4. White printed graduations with large marking strip for labeling
5. DNa/RNa free, Non-pyrogenic
Volume:
- 34117F: 15ml 50tubes/pack, 10 packs/case
- 32104F: 50mL, 25tubes/pack, 20 packs/case