-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Benchtop high speed refrigerated centrifuge ((24*1.5/2.2 ml) BT16R(Unit) With NO.3 FIXED ROTOR
FEATURES
Microprocessor control with AC Brushless Motor.
CFC free cooling system with pre-cooling function.
5 Inches Colorful LCD Display the parameters of speed ,timer,RCF,Temperature,rotors information,Program(Memory) information,Acceleration& Deceleration information and Error code information.
Steel centrifuge body and 304# stainless steel chamber are autoclaveable and resistant detergents and disinfection liquids.
Gas hinge for lid drop protection.
Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
Emergency lid lock release when power failure.
Window on lid for speed calibration and noise measurement.
Continuous operation, working continuous according the set time.
10 kinds of Program(Memory) and 10 kinds of Acceleration & Deceleration for choice.If ask for more Programs please specially mentioned when place the order.
-
Benchtop high speed centrifuge BT16 (Unit) With NO.3 FIXED ROTOR (24*1.5/2.2 ml)
FEATURES
Microprocessor control with AC Brushless Motor.
LCD Display the parameters of speed, timer, RCF, rotors information,Program(Memory)information, Acceleration& Deceleration information and Error code information.
Steel centrifuge body and stainless steel chamber are autoclaveable and resistant detergents and disinfection liquids.
Gas hinge for lid drop protection.
Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
Emergency lid lock release when power failure.
Window on lid for speed calibration and noise measurement.
Continuous operation, working continuous according the set time.
10 kinds of Program(Memory) and 10 kinds of Acceleration&Deceleration for choice. If ask for more Programs please specially mentioned when place the order.
-
Benchtop high capacity refrigerated centrifuge BT5R(Unit) With NO.1 SWING ROTOR (4*800ml)
FEATURES
Microprocessor control with AC Brushless Motor.
CFC free cooling system with pre-cooling function.
5 Inches Colorful LCD Display the parameters of speed ,timer,RCF,Temperature,rotors information,Program(Memory) information,Acceleration& Deceleration information and Error code information.
Steel centrifuge body and 304# stainless steel chamber are autoclaveable and resistant detergents and disinfection liquids.
Gas hinge for lid drop protection.
Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
Emergency lid lock release when power failure.
Window on lid for speed calibration and noise measurement.
Continuous operation, working continuous according the set time.
10 kinds of Program(Memory) and 10 kinds of Acceleration&Deceleration for choice.If ask for more Programs please specially mentioned when place the order.
-
Benchtop multi-pipe centrifuge BT5C(Unit) With NO.3 SWING ROTOR (32*10/15 ml)
FEATURES
Microprocessor control with AC Brushless Motor 5 Inches Colorful LCD Display the parameters of speed ,timer,RCF,rotors information, Program(Memory) information, Acceleration& Deceleration information and Error code information.
Steel centrifuge body and stainless steel chamber are autoclaveable and resistant detergents and disinfection liquids.
Gas hinge for lid drop protection.
Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
Emergency lid lock release when power failure.
Heat release holes design reduce the temperature inside the centrifugal chamber on running.
Window on lid for speed calibration and noise measurement.
Continuous operation, working continuous according the set time.
10 kinds of Program(Memory) and 10 kinds of Acceleration & Deceleration for choice.
-
PRP/Portable low speed centrifuge TD4(Unit) With NO.1 FIXED ROTOR (8*15ml)
FEATURES
PRP/Portable low speed centrifuge TD4
Microprocessor control with Brushless Motor.
Display the parameters of speed ,timer,RCF,Error code information.
ABS Centrifuge body and light weight in 5KGS.
Safety Electrical lid interlock,machine won’t run when lid open and error code appears.
Emergency lid lock release when power failure.
Window on lid for speed calibration and noise measurement.
Continuous operation, working continuous according the set time.
Automatic troubleshooting with indication of error code and alarm on the screen.
Wide choice of rotors and adapters.
With CE and ISO9001:2008,ISO13485 certificate
-
Benchtop low speed centrifuge TD4A(Unit) With NO.2 FIXED ROTOR (12*15ml)
FEATURES
Microprocessor control with Brushless Motor.
LCD Display the parameters of speed ,timer ,RCF ,Program(Memory) information.
Acceleration& Deceleration information and Error code information.
Steel centrifuge body and stainless steel chamber are autoclaveable and resistant detergents and disinfection liquids.
Gas hinge for lid drop protection.
Safety Electrical lid interlock,door can not open when rotor is running and machine won’t run when lid open and error code appears.
Emergency lid lock release when power failure.
Window on lid for speed calibration and noise measurement.
Continuous operation, working continuous according the set time.
10 kinds of Program(Memory) and 10 kinds of Acceleration & Deceleration for choice. If ask for more Programs please specially mentioned when place the order.
Automatic troubleshooting with indication of error code and alarm on the screen.
Wide choice of Swing rotors and angle rotors and adapters.
With CE and ISO9001:2008,ISO13485 certificate