-
Mini Vortex Mixer
Crystal Technology and Industries’ Mini Vortex Mixer is the ideal Vortex Mixer for every lab with its compact size, ease of use, and its economic price point. The 3,000 rpm fixed speed ensures proper mixing and accurate results.
MODEL:
• VM-03UW( with Blue Top)
• VM-03RUW( with Red Top)
• VM-03GUW (with Green Top)
• VM-03PUW (with Purple Top) -
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. -
-
190 L Stackable Magnetic Drive Incubator Shaker
The CO₂ Incubator Shaker features Temperature, Shaking, CO2 Concentration, and Humidity controls. Its’ stackable design helps maximize floor space, with the capability to stack up to three units high.MODEL:• IS-AMW(Ф26mm, without CO2)• IS-ACMW( (Ф26mm, with CO2)• IS-A5CMW(Ф50mm, with CO2)OPTIONAL ACCESSORIES:•IS-A1 50ML flask clamp
•IS-A2 100ML flask clamp
•IS-A3 150ML flask clamp
•IS-A4 200ML flask clamp
•IS-A5 250ML flask clamp
•IS-A6 500ML flask clamp
•IS-A7 1000ML flask clamp•IS-A8 2000ML flask clamp
•IS-A9 3000ML flask clamp
•IS-A10 5000ML flask clamp
•IS-A50 25ML flask clamp
•IS-A11 Test Tube Rack, 40 hole ¢14mm for 5ml tube•IS-A12 Test Tube Rack,40 hole¢16mm for 10ml tube
•IS-A23 Test Tube Rack, 40 hole¢18mm for 15ml tube
•IS-A24 Test Tube Rack, 27 hole¢22mm for 20ml tube
•IS-A42 Test Tube Rack, 21 hole¢30mm for 50ml tube
•IS-A20 Adjustable test tube rack,40 hole¢14mm for 5ml tube•IS-A21 Adjustable test tube rack,40 hole¢16mm for 10ml tube
•IS-A30 Adjustable test tube rack,40 hole¢18mm for 15ml tube
•IS-A31 Adjustable test tube rack,27 hole¢22mm for 20ml tube
•IS-A32 Adjustable test tube rack,21 hole¢30mm for 50ml tube
•IS-A37 Adjustable test tube rack,24 hole¢30mm, for 300mm length tube•IS-A13 96-Well Microplate Holder, Microplate Holer, can be mounted on platform of shakers
•IS-A35 Holder for Separating Funnel, Used for seperating funnel w/volume greater than 500ml;
•IS-A33 Infusion Bottle Clamp,500ml•IS-A34 Infusion Bottle Clamp, 1000ml
•IS-A47 Sticky Pad, WxD:140x140mm
•IS-A62 Rack for Stacking Incubator Shakers
•IS-A63 Multifunction Spring PlatformWxDxH:899x539x81mm;
•IS-A71 Automatic replenisher, Automatically refill water to humidity tray•IS-A72 RH Control system, including a water replenisher and humidity controller, which could keep the humidity in the chamber at the setting value.
•IS-A90 Water tank WxDxH:240x240x449mm;Used with IS-A71/A72;Capacity: 15L
•IS-A64 Remote Monitoring & Control System,Incl. advanced monitoring system and software for mobile phone -
191 L Dry-heat Air-jacketed CO2 Incubator
Crystal CO incubator uses high efficiency filter and the latest high temperature dry heat sterilization or damp heatsterilization technology, reduce the greatest degree of pollution while culturing; The high precision microcomputercontrol system ensures the high accuracy and uniformity of temperature and CO concentration in the chamber.The instrument is widely used in modern medical diagnosis and other fields.MODEL:• CI-191CW (Press-button)• CI-191CXW (Touch-screen)• CI-191CHXW(Touch-screen with humidity control)OPTIONAL ACCESSORIES:• CIA13 Chamber HEPA Filter,HEPA,φ140x44mm, replacement cycle: one year• CIA15 CO2 Inlet Filter,Inlet HEPA filter, φ54x53mm• CIA12 Standard shelf, 13kg• CIA24 Heavy Duty shelf, 24kg• CIA25 CO2 regulator• CIA19 Remote Monitoring for CO2 incubator