-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
6038 2.2ml Deep well plate
6038 2.2ml Deep well plate 1/bag, Nature ,Sterile, 50/case
- In addition to storage and screening applications, the 2.2ml Storage Plate is also
- Recommended for the growth of bacterial cultures.
- 96 square wells and 2.2ml volume.
- SBS standard footprint
- U-shaped well bottom to aid resuspension
- Material : Polypropylene
-
2707Bpk 81 well Box PP for 1.5/2.0ml tubes
2707Bpk 81 well Box PP for 1.5/2.0ml tubes, Blue (10/pack)
- Freezer racks with separate lids are for all major brands of screw cap micro centrifuge tubes.
- The box holds up to 81 tubes and has an alpha numeric labeling area. Freezes to -90C.
- Have every kind of color, the convenient laboratory.
- classification management
- Material : Polypropylene
-
7111pk 8 Strips Low Profile PCR Tubes + Optically Clean Caps
7111pk 8 Strips LP PCR tubes + Optically clean caps
• 0.1mL
• Optimal and consistent heat transfer
• Low binding interior surface, ensuring maximum yield
• Low-profile design reduces dead space between cycler heated lid and sample, eliminating condensation on tube side, preventing reduction in PCR volume, and increasing reaction efficiency
• Can be cut into sections
• Packing: 120/box -
7103pk 8 Strips PCR tubes with flat caps
7103pk 8 Strips PCR tubes with flat caps Nature
• Suitable for all 0.2ml block thermal cyclers
• 0.25ml maximum recommended capacity
• Individually numbered tubes
• Can be cut into sections
• Large end tabs for easy removal
• Labelled for orientation
• Packing: 120/box -
7102pk QPCR 8-strip Tube & Caps
7102pk 8 Strips PCR tubes with Real time caps, Nature Colour
Each Ultra Clear Cap has a highly polished flat surface, providing an optically clear window. The caps are mounded from a specially formulated polypropylene that enhances signal detection by minimizing autofluorescence and maximizing transmission.
• Specially formulated ultra clear
• Polypropylene
• Highly polished
• Flat cap design
• Packing: 120/box -
7001pk PCR Tubes
7001pk 0.2 ml PCR tubes with flat caps, Nature (1000/box)
-
Multi Mixture Rack for 0.5ml/1.5ml/50ml Tubes
Specifications
• PP test tube rack can be used for multipurpose in four face different test tubes diameter.
• Polypropylene racks and boxes suitable for use with 0.5ml, 1.5ml, 1.7ml, 2.0ml, 15ml, 50ml tubes
• Packing: 5/pack -
Ice Bucket and Ice Pan
Specifications
• Solid, molded in one piece, expanded polyvinyl chloride(PVC)
• Resistant to temperatures from -321°F(-196°C) to 200°F(93°C)
• Impervious to moisture or odors
• Superior insulation
• Lightweight
• Portable
• Unbreakable
• Long-Lasting -
6402pc 81 well Cryobox for LN2 Storage
6402pc 81 well Cryobox for LN2 Storage
• For storage to -190°C
• Holds up to 81 tubes
• Dimension: 5¼˝L x 5¼˝W x 21⁄16˝H, fits all standard storage units.
• Clear lid
• Stackable and autoclavable
• Made of polycarbonate -
6264pk 81 well Cyro Box
6264pk 81 well Cyro Box for 1.5/2.0ml tubes (12 boxes/pack)
Features:•Cardboard material with water-repellent coating for moisture resistance.
•Capacity for 81 sample tubes (9×9 places for 1.5-2ml microcentrifuge and cryovials)
•Easy to write surface
•Dimension: D13.2×W13.2×H5.3cm
•Comes with grid inserts and dividers for sample tubes
•Markings on both the interior and exterior surfaces -
0296Bpk 96 well rack
0296Bpk 96 well rack PP for 0.2ml PCR tubes, Blue
• Freezer racks with separate lids are for all major brands of screw cap micro centrifuge tubes.
• The box holds up to 0.2ml / 96 tubes.
• Has an alpha numeric labeling area.
• Freezes to -90C.
• Material : Polypropylene
• Packing: 10 units/pack -
4301PC Basicpipette Aids
4301PC Basicpipette aids
• Continuous speed control wheel
• Blow-out and gravity dispense selection
• Dangerous fume or liquid protective hole
• Single-handed Operation, Self-inverted on the bench
• UV-resistant housing, Complies with CE and RoHS
• Light-weighted; 167g, including a lithium battery
• Battery Lidicator
• Helix Switch Close-knit
• Other bands to serve as reference points.
#pipette gun #pipette controller