-
Conical-bottom centrifuge tube
*Special price valid while stock last.
Conical-bottom Centrifuge tubes,Polypropylene
1. These conical-bottom tubes are made of ultra-clear polypropylene
2. Cap Materials: HDPE
3. Leakproof (-95kPa, 14 psi)
4. White printed graduations with large marking strip for labeling
5. DNa/RNa free, Non-pyrogenic
Volume:
- 34117F: 15ml 50tubes/pack, 10 packs/case
- 32104F: 50mL, 25tubes/pack, 20 packs/case
-
91696Opk Reversible Racks for Microtube, Polypropylene 96-well
91696Opk Reversible microtube rack, 1.5/2.0ml + 0.5/0.7ml, 96-well , orange (1/bag)
Reversible Racks for Microtube,Polypropylene and 96-well
1. Manufactured in Heavy-duty Polypropylene.
2. One side is designed to hold 1.5ml/2.0ml tubes,the other side holds 0.5ml/0.7ml tubes.
3. Racks are molded numbered on the surface for easy samples identification.
4. Idea for Freezing.Temperature range-80℃ to 121℃.Suitable for autoclaving at 121℃. -
Cryovial Storage Boxes for 1ml And 2ml Tubes, Polycarbonate
91300pk Cryovial storage box, PC, 100-well, Green color (10 racks)
Cryovial Storage Boxes for 1ml and 2ml Tubes, Polycarbonate
1. Manufactured in Polycarbonate provide ultra low temperature storage from -196℃ to 121℃
2. Fitting for storage of Cryovials from 1.0ml to 2.0ml in Liquid Nitrogen or Freezer
3. Alphanumeric grid on lid for easy identification of samples
4. With Air vents for storage of freezing
5. Covers are keyed to the base to prevent misalignment, with transparent cover and moverable grid.
6. Measurement: 10×10 Array box, measurement: 130 x 130 x 53mm(LxWxH,mm) -
39400-2E Cryovial, Internal thread with Silicone washer seal, 2.0mL, Self-standing
*Special price valid while stock last.
1. Made from special polypropylene for storing biological material or cells at temperatures as low as -196°.(only in the gas phase of liquid nitrogen)
2. Packing: 100/bag, 10 bags/case
-
Culture Tubes, Round Bottom,with Dual-position Cap,Graduated
Disposable Culture Tubes, Round Bottom, Rimed,with Dual-position Cap,with Graduation
1. Made of ultra clear virgin polypropylene or virgin polystyrene
2. Polystyrene tubes are transparent. Polypropylene tubes are opaque, break-resistant.
3. 12x75mm Polystyrene tubes can withstand centrifugation up to 1400xg and temperature at 80°C; Polypropylene tubes can be 3000xg and 120°C
4. 17x100mm Polystyrene tubes can withstand centrifugation up to 3000xg and temperature at 80°C; Polypropylene tubes can be 5500xg and 120°C
*Available with Printed Graduations and large white marking area for easy labelling.
Dual-position cap:
-Vented for aerobic cultures work
-Sealed for anaerobic cultures work
OPTIONS:
•82142: 12x75mm, 4mL, PS, 25/peel bag, 40 bags/case
•82442: 17x100mm, 12mL, PP, 25/peel bag, 40 bags/case -
BF4000 SMOChem™ 1X Tris-Glycine-SDS Running Buffer Powde, 5 pouches/pack (For 5000 ml)
1X Tris-Glycine-SDS Running Buffer Powder is used for electrophoresis on Q-PAGE™ Tris-Glycine Precast Gel or Laemmli Tris-HCl gels in Tris-Glycine buffer system. It is convenient and universal for electrophoresis in Tris-Glycine buffer system.
-
Lab1st Portable High Precision Balance Scale, 1100g × 10mg, 2100g × 10mg, 3100g × 10mg
Easy to read LCD display, one touch tare up to full capacity, high resolution, quick readable weighting, easy to operate, widely used in high precise industrial applications, laboratory, university.
Model:
• PR1102E: 1100g × 10mg
• PR2102E: 2100g × 10mg
• PR3102E: 3100g × 10mg
OPTIONAL ACCESSORIES:
• Dot Matrix Printer Usually for Balance -
Lab1st Economical Analytical Balance, 120g × 0.1mg, 200g × 0.1mg, 220g × 0.1mg
The visual appearance of the product incorporates a simple concept, stylish and generous. Specially makes the fine pouring cast-aluminum outer covering,so as to enhance the balance of the anti-static anti-jamming capability.The panel with five operational button, sliding glass windscreen provide big space,Insightful vision and operate easily.We use high precision magnet sensor to keep the weighing more fast and stable.
Model:
PR124E: 120g×0.1mg
PR204E: 200g×0.1mg
PR304E: 220g×0.1mg
OPTIONAL ACCESSORIES:
• Dot Matrix Printer Usually for Balance -
LFH-2-2220V 780×620×1150mm Benchtop Ducted Fume Cupboard
A chemical fume hood (fumeA chemical fume hood (fume cupboard) is a specific type of air ventilation system equipped with powerful and energy-efficient fans and high-quality filtration media. cupboard) is a specific type of air ventilation system equipped with powerful and energy-efficient fans and high-quality filtration media.
-
PRINT-01 Thermal Printer for Halogen Moisture Analyzer
This printer usually used with our halogen moisture analyzer.
-
Lab1st Halogen Moisture Analyzer, 110g × 10mg, 110g × 5mg, 110g × 2mg, 110g × 1mg
Model:
• MB112-Alumin: 110g × 10mg
• MB113A-Alumin: 110g × 5mg
• MB113B-Alumin: 110g × 2mg
• MB113C-Alumin: 110g × 1mg
OPTIONAL ACCESSORIES:
• PRINT-01 Thermal Printer for Halogen Moisture Analyzer -
Lab1st High Precision Balance, 110g × 1mg, 210g × 1mg, 310g × 1mg
Easy to read LCD display, one touch tare up to full capacity, high resolution, quick readable weighting, easy to operate, widely used in high precise industrial applications, laboratory, university.
Model:
• PR113E: 110g × 1mg
• PR213E: 210g × 1mg
• PR313E: 310g × 1mg
OPTIONAL ACCESSORIES:
• Dot Matrix Printer Usually for Balance -
Lab1st Portable High Precision Balance Scale, 210g × 10mg, 310g × 10mg, 610g × 10mg
Easy to read LCD display, one touch tare up to full capacity, high resolution, quick readable weighting, easy to operate, widely used in high precise industrial applications, laboratory, university.
Model:
• PR212E: 210g × 10mg
• PR312E: 310g × 10mg
• PR612E: 610g × 10mg
OPTIONAL ACCESSORIES:
• Dot Matrix Printer Usually for Balance -
Lab1st Intelligent Automatic Moisture Analyzer, 110g × 1mg, 110g × 1mg, 110g × 0.1mg
Lab1st Intelligent Automatic Moisture Analyzer is designed to provide accurate measurements and fast results. It comes with smart functionalities that allows you to preset and store measuring methods, so you can access the options with ease.
MODEL:
• MB113E: 110g × 1mg
• MB113EAD: 110g × 1mg
• MB114EAD: 110g × 0.1mg -
Rotor AS6-50V for Centrifuge 0636
6 holes Rotor of centrifuge 0636, 6x50ml/15ml tubes, Max. RCF: 4020×g
-
Centrifuge 0636 Multi-Purpose Low-speed Centrifuge
Centrifuge 0636 Multi-Purpose Low-speed Centrifuge is ideal for chemistry, cytology, research laboratories, industrial laboratories and other. This is suitable for tubes with caps, blood collection or urine tubes. Swing-out rotors and adapters can be compatible with standard tubes up to 100mL at low speed.
OPTIONAL ACCESSORIES:
- Rotor AS6-50V for Centrifuge 0636
-
1-1000mbar Touch-screen Vacuum Controller
The vacuum controller serves as a device for labs to display, adjust and control the degree of vacuum in vacuum systems. It generally constitutes the vacuum control system of rotary evaporator along with vacuum pump, which enables repeatable distillation experiment and recovery of many kinds of solvents in an efficient and automatic manner.
-
Dot Matrix Printer Usually for Balance
The Dot Matrix Printer, which has a streamlined appearance and an outstanding cost-effective, completely meets the quality requirements of the chemical and pharmaceutical industry and GLP, GMP standard certification. From the most basic printing needs to the wealth of applications, the printer provides users with flexible choice.
This product usually used with our all kinds of Balance.
-
Lab1st Semi-micro Balance, 210g × 0.01mg
Expertly weigh small samples with precision using the Lab1st Semi-micro Balance. With a maximum capacity of 210g and accuracy of 0.01mg, this balance provides reproducible results for scientific research and industrial applications. Enhance your analytical process with confidence.
OPTIONAL ACCESSORIES:
• Dot Matrix Printer Usually for Balance -
7.5 cu ft Vacuum Drying Oven 210L
With a spacious 7.5 cu ft capacity, this Vacuum Drying Oven 210L is perfect for drying a wide range of materials. The vacuum function allows for precise temperature control and the interior shelves provide ample space for efficient drying. Perfect for scientific and industrial use.
-
3.2 cu ft Vacuum Drying Oven 90L
This 3.2 cu ft Vacuum Drying Oven is designed for efficient, gentle drying of sensitive materials. With a spacious 90L capacity, it can handle larger quantities and a wide range of materials. The vacuum environment helps to prevent oxidation and promote faster drying times, making it ideal for research and industrial purposes.
-
1.9 cu ft Vacuum Drying Oven 53L
Introducing our 1.9 cu ft Vacuum Drying Oven 53L, the perfect solution for drying delicate materials. With its advanced vacuum technology, this oven offers precise and gentle drying, preventing damage and preserving material integrity. Ideal for industries requiring precise and efficient processes.
-
0.9 cu ft Vacuum Drying Oven 25L
Vacuum drying ovens are made up of stainless steel that can bear the high vacuum pressure without any kind of deformation. They are divided into hollow trays which increases the surface area for heat conduction. The materials to be dried are kept on the trays inside the vacuum dryer and pressure is reduced by means of vacuum pump. The dryer door is tightly shut and steam is passed through the space between trays and jacket so that the heat transfer occurs by conduction.
Lab1st’s drying ovens are built with polished stainless steel interior, removable racks, overheat protection, inert gas inlet, temp calibration, timing and other functions. All ovens are CE compliant.
-
1 Channel 0.16~1690ml/min Speed-Variable Intelligent Dispensing Peristaltic Pump BT300F
BT300F is a high-performance intelligent peristaltic pump with a variable speed of 0.16-1690ml/min. It contains 1 channel and is ideal for precise liquid delivery. Suitable for a variety of applications, it provides repeatable, reliable, and accurate results.
-
Vacpette Economical Vacuum Aspirator
Vacpette Economical Vacuum Aspirator is suitable for any application where the single liquid suction volume is less than 2L. The applicability includes use of various common consumables, which can be widely used in the collection and removal of liquids in experiments of microorganisms, molecules, proteins, cells, etc., and other applications such as RNA/DNA extraction,Western blots and ELISA.
• Aspiration of supernatants after centrifugation
• Aspiration of eluent
• Removal of supernatants during nucleic acid extraction
• Removal of culture media
• Removal of wash solutions from immuno-assay well-plate
• Removal of buffers of Western blot strips
• Removal of excess liquid from slides and Petri dishes -
Frespenser Pro 0.1–99.9mL Electronic Bottle-Top Dispenser
Frespenser Pro 0.1–99.9mL Electronic Bottle-Top Dispenser has high precision and accuracy, along with a motor lift to reduce the physical strain. Microprocessor-controlled, can be set all the parameters in the controller Motor lift piston system, making the dispense more precise and easy to use Large LCD screen, separate design with the main unit which makes the operation more convenient. Two dispensing modes, including the dispenser and stepper functions Includes certification of calibration.
Bottle is not included.
-
-86℃ Self-Cascade System 2 CF Ultra Low Temperature Freezer
Introducing the 86℃ Self-Cascade System 2 CF Ultra Low Temperature Freezer featuring self-cascade technology and ultra-low temperature protection. It is capable of maintaining temperatures to -86℃ with less than 1% temperature variability, ensuring your samples are stored safely for long periods of time.
-
-5℃~95℃ 10L Water Bath Recirculating Water Heating Cooling Chiller Circulators for Laboratory
This 10L water bath recirculating water heating cooling chiller circulator is designed for laboratories, providing a temperature range of -5℃ to 95℃. With precise temperature control and efficient circulation, it is ideal for various experiments and testing. Keep your samples at the desired temperature for accurate results.
-
-5℃~95℃ 6L Water Bath Recirculating Water Heating Cooling Chiller Circulators for Laboratory
Lab1st DC series heating cooling circulator is an open table type circulator with compact structure and small footprint. Its temperature range is -5℃- 95℃.
-
-10℃~95℃ 15L Water Bath Recirculating Water Heating Cooling Chiller Circulators for Laboratory
This water bath recirculating chiller circulator can maintain temperatures from -10℃ to 95℃, making it perfect for laboratory use. With a 15L capacity, it is able to provide efficient heating and cooling for a variety of applications. Keep your experiments at the optimal temperature with this versatile and reliable equipment.
-
50L Vacuum Filter Jacketed Glass Vessel Stirred Crystallization Reactor with Mother Liquor
Compared to standard jacketed glass reactor, the Lab1st JGR-FK series is more multifunctional since it has reaction, crystallization as well as filtration functions. Besides, it has a liquid collection flask to collect liquids after reaction. JGR-50FK is made of high borosilicate glass and equipped with PTFE seals, ensuring clean and long lifespan. It can be operated under a wide range of temperature from -80℃ to 200℃ and the stirring motor is 120W, bringing you remarkable performance.
-
1L Chemical Lab Jacketed Glass Reactor Vessel with Digital Display for Laboratory Reaction
Lab1st JGR-L series jacketed glass reactors are designed as a multi-purpose reaction platform with controlled temperature and pressure environment, for both laboratory and scale-up applications. Each reactor consists of a corrosion resistant jacketed glass reaction vessel, PTFE coated variable speed stirrer system, temperature probe and digital display, and other accessories like feeding funnel, coiled condenser and bottom discharge valve.
-
30L Chemical Lab Jacketed Glass Reactor Vessel with Digital Display for Laboratory Reaction
Lab1st JGR-L series jacketed glass reactors are designed as a multi-purpose reaction platform with controlled temperature and pressure environment, for both laboratory and scale-up applications. Each reactor consists of a corrosion resistant jacketed glass reaction vessel, PTFE coated variable speed stirrer system, temperature probe and digital display, and other accessories like feeding funnel, coiled condenser and bottom discharge valve.
-
20L Rotary Evaporator with Motor Lift
Lab1st RE-5B series is a perfect choice to do evaporation and solvent recovery for those have a limited budget but need quality products. With a motor lifting bath, swivel casters and a LCD display, the RE-520B is very easy to operate. It is also equipped with solvent-resistant PTFE and viton gaskets, ensuring long time operation. The rotary flask of RE-520B is 20L, which is quite suitable for lab or pilot scale.
-
1500-2500 ml/h Evaporation Rate Glass Vacuum Spray Dryer
Lab1st SDG series spray dryer is mainly used to produce trace particle powder for universities, research institutes and enterprises’ laboratories in food, medicine and chemical industry. It has broad spectrum applicability to all solutions such as emulsion and suspension, and is suitable for drying heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc. The material is heated only when they sprayed into mist size particles, so they are just instantaneously heated and can keep these active materials maintain its active ingredients.
-
1500-2500 ml/h Evaporation Rate Stainless Steel Vacuum Spray Dryer
Lab1st SDS series spray dryer is mainly used to produce trace particle powder for universities, research institutes and enterprises’ laboratories in food, medicine and chemical industry. It has broad spectrum applicability to all solutions such as emulsion and suspension, and is suitable for drying heat-sensitive substances such as biological products, biological pesticides, enzyme preparations, etc. The material is heated only when they sprayed into mist size particles, so they are just instantaneously heated and can keep these active materials maintain its active ingredients.
-
Heating Mantle 5L Thermocouple Magnetic Stirring Mixer Lab Thermostatic Heater with Temperature Control Probe
Lab1st DM-series magnetic stirrer is a laboratory device that employs a rotating magnetic field to cause a stir bar (or flea) immersed in a liquid to spin very quickly, thus stirring it. The rotating field may be created either by a rotating magnet or a set of stationary electromagnets, placed beneath the vessel with the liquid.
-
100L Vaccum Filter Jacketed Glass Vessel Stirred Crystallization Reactor
Compared to standard jacketed glass reactor, the Lab1st JGR-FK series glass reactor is more multifunctional since it has reaction, crystallization as well as filtration functions. Besides, the 100 liter filter reactor has a liquid collection flask to collect liquids after reaction. Lab1st batch reactor is made of high borosilicate glass amd equipped with PTFE seals, ensuring clean and long lifespan. 100L lab chemical reactor can be operated under a wide range of temperature from -80℃ to 200℃ and the stirring motor is 200W, bringing you remarkable performance.
Features:With Filter plate on the bottom for filtration and Equipped with mother liquor collection flask with condenser and moving trolley.
Jacket interface can be matched with different heater and chiller.
Optional high quality thermal insulation jacket available. -
5L Vaccum Filter Jacketed Glass Vessel Stirred Reactor
The Lab1st JGR-F series is more versatile than other series as it has three functions: reaction, crystallization and filtration. JGR-20F is made of high borosilicate glass amd equipped with PTFE seals, ensuring clean and long lifespan. It can be operated under a wide range of temperature from -80℃ to 200℃ and the stirring motor is 120W, bringing you remarkable performance. In addition, with a filter base at the bottom of the glass vessel, you no longer need to transfer material, hence largely reduces material losses.