1. Equipped with conductivity detector to quantify TOC concentration.
2. In compliance with FDA-21 CFR Part11 requirements and USP, EP, JP and ChP.
3. Quick test, each analysis takes less than 3 minutes.
4. All historical records can be traced by searching test date.
5. Modular design for quick installation and easy maintenance.
1. With multi solvent management system, each flow path is equipped with two mobile phases, and the mobile phase can be switched with one key as required.
2. Equipped with autosampler, it can get rid of the trouble of manual injection, inject samples continuously for 24 hours, and complete the test data faster.
3. Wide area temperature control column oven, stable temperature control up to 65 ℃, with good data reproducibility.
1. Auto-range conductivity detector to realize the imultaneous determination of 5ppb-100ppm concentration sample without setting the range.
2. A micro gas-liquid separator is set to remove the bubble from the eluent.
3. Set “intelligent maintenance”, the instrument can complete the flow path switch to the pure water path.
4. The mobile APP can remotely control the instrument on /off and observe the operation performance parameters of the instrument.
Dual Beam Light Path Design
Powerful Stand-alone Operation System
Long Light Path Design
UV Analyst PC Software
16mm Rigid Aluminum Optical Base
One-button Automatic Calibration System
6 inches Large LCD display
Easy Data Output and Printing
1. Latest Microprocessor Controlling System
2. Precision 1200 lines/mm Grating Monochromator
3. Easy Data Output by USB/Parallel Port
4. Elegant Streamlined Design, Multi-function Operation System
5. Four Display Modes, One-Button Quick Switching
1. LCD (resolution: 128×64, dimension: 66×33mm) controlling system, intuitively display the system running state and various parameters.
2. 2 way online water quality sensor, detect the quality of RO water and ultrapure water respectively. And warn once water quality’s standard exceeding.
3. Cartridges replacing alarm function, based on time and water quality, show cartridges’ used and residual life.
4. Multiple alarm function: no feed water, full water, water quality’s standard exceeding, and cartridge life ending.
5. Auto self-flushing of RO membrane function, extend RO membrane’s life.
6. Level II password, protect all the parameters setting, and prohibit any unauthorized setting change.
7. Water dispensing function- timing and quality (time range: 1-99min, water quality range: 0.1-18.2MΩ.cm).
1. HD large LCD display and the parameters can be revised during operation without shutdown.
2. Program group shortcut key, large storage space, can store 99 program.
3. Microcomputer control ,AC frequency conversion brush-less motor with fast speed and stable operation.
4. Steel Structure,centrifuge chamber made of stainless steel with Environmentally friendly anti-corrosion coating treatment.