-
Liebherr Heavy-duty Profibus Fridge Series with Electronic Controller and Glass door, 1361L
LKPv 1423 Heavy-duty Profibus Fridge Series with Electronic Controller and Glass door.
• Capacity: 1361L
• Dimension (H x W x D): 216 x 143 x 83 cm
• Temperature Range: 0°C to +16°C
• Double Glass Door -
BT4011-E Orbi-Shaker™CO2 XL orbital shaker with flat mat platform (16 x 16.5″)
The new Orbi-Shaker CO2 series is designed for shaking, mixing& aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%.
The new Orbi-Shaker CO2 series is designed for shaking, mixing& aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60°C and humidity levels up to 100%.
To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s).
The instrument is supplied with a non-slip rubber mat platform. In addition, convenient MAGic Clamp™ platforms (of multiple sizes) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method (PATENTED) has been widely recognized as the easiest way to instantly change between flask clamps of different sizes.
To avoid contamination, unintentional release of gas or deviations from protocol, all settings are adjusted via the included remote control module. This module can be stored outside of the chamber and connects to the shaker via a flat (1mm thickness) cable, that easily passes through a port or underneath an incubator door without compromising the seal. This allows for user adjustment of run time or mixing speed without opening the chamber door(s).
OPTIONAL ACCESSORIES:
•BT4010-MR Universal magnetic platform, 16 x 16.5″
•H1010-MR Universal magnetic platform, 18 x 18″
•H1000-MR-50 50 ml flask clamp
•H1000-MR-CMB adjustable flask clamp, holds 125, 250, or 500 ml flasks
•H1000-MR-125 125 ml flask clamp
•H1000-MR-250 250 ml flask clamp
•H1000-MR-500 500 ml flask clamp
•H1000-MR-1000 1L flask clamp
•H1000-MR-2000 2L flask clamp
•H1000-MR-MP microplate clamp
•H1000-MR-T14 14mm tube rack
•H1000-MR-T15 15 ml tube rack
•H1000-MR-T150H 15 ml tube rack, horizontal
•H1000-MR-T15H 1.5/2 ml tube rack, horizontal
•H1000-MR-T50 50 ml tube rack
•H1000-MR-T500H 50 ml tube rack, horizontal
•H1000-MR-1550 15 and 50 ml combination tube rack
•H1000-MR-TSR tilted holder for tube racks
•H1000-MR-T600 600 ml conical bottle rackThe instrument is supplied with a non-slip rubber mat platform. In addition, convenient MAGic Clamp™ platforms (of multiple sizes) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method (PATENTED) has been widely recognized as the easiest way to instantly change between flask clamps of different sizes.
-
C80/ C80P 85L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 85L volume.
MODEL:
• C80: 140℃ high heat sterilization
• C80P: 180℃ high heat sterilization -
JJY Series Lab Ultrasonic Homogenizer Y99-IIDN, 1-1200ml
Single chip microcomputer technology + 4.3-inch TFT capacitive touch screen control (optional choice- 7 inches), other optional functions such as computer communication or data printing;
High degree of intelligence, centralized control of the central computer, ultrasonic time, power can be set from 1%-100%;
Sample temperature detection display, frequency microcomputer automatic tracking, fault automatic alarm;
With overload protection function and if the horn not immersed in the liquid will automatically protect the luffing rod from damage;
Can realize fault, over temperature or operation error caused by voice alarm function, more humanized. -
Water Purification System aquapuri 532VF
UV/UF combined model Type I, 120 L/h, feed water : Type II Included Filters AP III(TOC) AP IV(TOC) UF and UV, Final Filter
-
Downdraft Ductless Fume Hood / DLF-SL100V1
Designed with portability and functionality in mind, Starlinx Ductless Fume Hood meets all modern laboratory needs. With unrestricted viewing from all sides, this fume hood is a perfect unit for educational and demonstration purposes.
Safety is also assured with a filtration system consisting of honeycomb-activated carbon filters designed to neutralize chemical fumes emitted from lab activities. -
SM798R Floor-Standing High Capacity Grinder (with Freezing)
For grinding samples, it is a grinder with freezing function.
-
TC 9639 Thermal Cyclers
Benchmark’s TC9639 Thermal Cyclers provide consistent, reliable results for laboratories with medium to high throughput. From their large, touch-screen user interface to unique, multi-format blocks, these cyclers are loaded with features.
MODELS
• T5000-96-E 96 well cycler with multiformat block
• T5000-384-E Cycler with 384 well block
OPTIONAL ACCESSORIES
• T5000-A-IS In-situ adapter for 4 slides (for T5000-96 only) -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Z327-E Hermle Z327 Centirfuge, 230V
-Swing out rotors accept up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml)
-Swing out plate rotor accepts deepwell plates
-Extremely versatile, 17 rotor options
-Refrigerated model available (Z327-K)
-High speed rotors (up to 23,542 xg)
-Fixed angle rotors from 0.2 ml up to 85 ml
Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide!
Optional accessories:
•Z306-100 Hermle 4x145ml swing out rotor
•Z326-100H Hermle 4x100ml swing out rotor with buckets
•Z327-200 Hermle 4 x 200 ml swing out rotor, with 4 buckets
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-1220H Hermle 12 x 1.5/2.0ml rotor, Hermetically Sealed
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Mobile Ductless Fume Hood / DLF-120XP
If you have a need for a compact ductless fume hood, this model may be an excellent choice for your application. The unit is available with an activated carbon filter. The small size and low power consumption of this unit make it easy to move and transport if required.
-
NS1000-E SmartDrop™ L Nano Spectrophotometer, 230V
SmartDrop™ L Nano Spectrophotometer, 230V
-
Z216-MK-E Hermle Z216 MK Refrigerated Centrifuge, 230V
-9 rotor options with capacity up to 44 x 1.5/2.0ml
-High speed, 15,000 rpm/21,631 xg
-Powerful refrigeration, room temp. to 4°C in <10 min
-Accepts tubes from 0.2ml to 5mlCompact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of ten available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.
All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.
In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20°C and is designed to reach 4°C (from room temperature) in less than 10 minutes.
Optional accessories:
•Z216-1205 Hermle 12 x 5ml rotor (for Z216 series only)
•Z216-2420 Hermle 24 x 1.5/20ml rotor (for Z216 series only)
•Z216-2420H Hermle 24 x 1.5/2.0ml rotor, hermetically sealed (for Z216 series only)
•Z216-24HEM Hermle 24 x Hematocrit rotor (for Z216 series only)
•Z216-3020H Hermle 30 x 1.5/2.0ml rotor, hermetically sealed (for Z216 series only)
•Z216-3202 Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only)
•Z216-4420 Hermle 44 x 1.5/2.0ml rotor (for Z216 series only) -
C180/ C180P 180L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 185L volume.
MODEL:
• C180: 140℃ high heat sterilization
• C180P: 180℃ high heat sterilization -
LYZ-2102C Shaking Incubator, Single Door; 66*44*65mm(170L); 250ml*24
Integrated with incubator and shaker to save space and cost;
High quality steel shell, polished stainless steel chamber;
Unique slope design panel with large LCD display, better visual effect;
With operation data memory and password locking function to eliminate faulty operation;
Non-volatile memory saves settings during a power outage and automatically restarts the unit as originally programmed after power is restored;
When the measured temperature deviates from set temperature by 3℃ (can be set arbitrarily) will automatically stop heating and send out audible and visual alarms;
LYZ-2102C, LYZ-2102, LYZ-2112B equips with strong and fast refrigeration system for instant cooling requirements, automatic defrost;
The most advanced large torque motor to ensure continuous work without maintenance;
With large view window and built-in lighting for easy observation;
Low noise , luxury and beautiful appearance;
Equipped with leakage protection. -
401L Incubator Shaker(Refrigerated)
IS-6 incubator shaker features Temperature, Shaking, CO2 Concentration, and Humidity controls. It’s stackable design helps maximize floor space, with the capability to stack up to three units high. Shaking diameter is available for both 26mm or 50mm.
MODEL:
• IS-6W(26mm, without CO2)
• IS-6CW(26mm, with CO2)
• IS-6C5W(50mm, with CO2)
OPTIONAL ACCESSORIES:
•IS-A1 50ML flask clamp
•IS-A2 100ML flask clamp
•IS-A3 150ML flask clamp
•IS-A4 200ML flask clamp
•IS-A5 250ML flask clamp
•IS-A6 500ML flask clamp
•IS-A7 1000ML flask clamp
•IS-A8 2000ML flask clamp
•IS-A9 3000ML flask clamp
•IS-A10 5000ML flask clamp
•IS-A50 25ML flask clamp
•IS-A11 Test Tube Rack, 40 hole ¢14mm for 5ml tube
•IS-A12 Test Tube Rack,40 hole¢16mm for 10ml tube
•IS-A23 Test Tube Rack, 40 hole¢18mm for 15ml tube
•IS-A24 Test Tube Rack, 27 hole¢22mm for 20ml tube
•IS-A42 Test Tube Rack, 21 hole¢30mm for 50ml tube
•IS-A20 Adjustable test tube rack,40 hole¢14mm for 5ml tube
•IS-A21 Adjustable test tube rack,40 hole¢16mm for 10ml tube
•IS-A30 Adjustable test tube rack,40 hole¢18mm for 15ml tube
•IS-A31 Adjustable test tube rack,27 hole¢22mm for 20ml tube
•IS-A32 Adjustable test tube rack,21 hole¢30mm for 50ml tube
•IS-A37 Adjustable test tube rack,24 hole¢30mm, for 300mm length tube
•IS-A13 96-Well Microplate Holder, Microplate Holer, can be mounted on platform of shakers
•IS-A35 Holder for Separating Funnel, Used for seperating funnel w/volume greater than 500ml;
•IS-A33 Infusion Bottle Clamp,500ml
•IS-A34 Infusion Bottle Clamp, 1000ml
•IS-A47 Sticky Pad, WxD:140x140mm
•IS-A62 Rack for Stacking Incubator Shakers
•IS-A63 Multifunction Spring PlatformWxDxH:899x539x81mm;
•IS-A71 Automatic replenisher, Automatically refill water to humidity tray
•IS-A72 RH Control system, including a water replenisher and humidity controller, which could keep the humidity in the chamber at the setting value.
•IS-A90 Water tank WxDxH:240x240x449mm;Used with IS-A71/A72;Capacity: 15L
•IS-A64 Remote Monitoring & Control System,Incl. advanced monitoring system and software for mobile phone -
LYZ-211B Shaking Incubator, 970*565*280mm(155L); 500ml*28
Integrated with incubator and shaker to save space and cost;
High quality steel shell, polished stainless steel chamber;
Large LCD screen to display temperature and shaking speed;
With operation data memory function to eliminate faulty operation;
Non-volatile memory saves settings during a power outage and automatically restarts the unit as originally programmed after power is restored;
Auto-stop operation when door is opened. Strong air spring rod with easy opening and closing;
Brushless DC motor, more stable and reliable;
With UV Sterilizer;
Equipped with leakage protection. -
BSC-1302IIA2 Biological Safety Cabinet 4 feet, Class II Type A2
Includes:
•NSF 49 Certification for the 1st year
•Sockets (2 pcs)
•Valves (2 pcs)
•Detachable stand with adjustable height
Friendly Control Panel
•LED screen, show the air velocity, time, fan station, alarm in real time.
Safe and Reliable, Energy-Efficient
•DC fan and LED light make the operation power consumption save 30%.
•Intelligent auto-supply system of imported blower ensures the change of air volume less than 10% when the resistance of filter increases 50% and enhance safety.
•The alarm system for safe operation height is interlocked with light. At the same time light is interlocked with sterilizing.
•Leak detection in cabinet, no leakage at 500Pa.
•UV light with set timer, safer and high efficiency.
Humanized design
•10°sloped front make it comfortable to operator.
•Negative pressure and double layers chamber around ensure non-leakage, non-pollution.
Demountable circular-arc armrest can alleviate working tiredness and make it easy to transport.
•Front window adopts hanging lifting system (Imported from Japan) and more than 5mm thickness security glass with arbitrary positioning, high stability and convenient to sterilization when it closed.
•Movable stainless steel worktable 4 liter capacity stainless steel collecting tank with below down valve, easy to collect water, cleaning and disinfection.
•Non-obstructive air return mode in the front suction channel.
•The adjustable leveling foot is without exposure thread.
HEPA filters
•USA HV HEPA Filter Medium, provide 99.995% typical efficiency for particle size over 0.3 microns, and the materials is glass fiber.
•A minimum ISO 5 air quality in the work area
•Unique Technology of non leakage.
•Every HEPA filters will be tested to ensure non leakage. -
Water Purification System aquapuri 541
Integrated model(tap water to Type I and III, no need tank) Included Filters AP I AP II AP III AP IV Final Filter
-
Z366-E Hermle Z366 Centrifuge, 230V
-4 x 250ml swing out rotor capacity,
up to 16 x 50ml and 40 x 15ml
-Advanced programming with auto-rotor recognition
-Optional high speed rotors, providing up to 24,000 xg
-Available with refrigeration
For applications requiring increased capacity over the Z306 or Z326 series
centrifuges, the Z366 series offer a unique “Mid-Range” swing out rotor that
accepts a variety of different tubes, including up to 12 x 50ml or 28 x 15ml.
Despite this step up in capacity, the Z366 maintains a surprisingly compact
design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.
In addition to the popular 4 x 250ml swing out rotor, a variey of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 6 x 3 position microplate rotor is also available, as well as a 4 x PCR strips (8-strips).
Advanced microprocessor controls allow for instant rotor identification,
which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Optional accessories:
•Z366-250 Hermle 4 x 250ml swing out rotor
•Z366-250-HC Hermle 4 x 250ml high capacity swing out rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
MR9600-E Accuris Absorbance Microplate Reader, for 96 Well Plates, 230v
Accuris SmartReader 96 Microplate 96 absorbance reader 230V
-
Water Purification System aquapuri 551
Integrated model(tap water to Type I and II, no need tank) Included Filters AP I AP II AP III AP IV Final Filter
-
OPTIZEN POP Single-Beam Spectrophotometer.
OPTIZEN POP measures transmittance or absorbance for each wavelength of a sample in the ultraviolet and visible ray bands, and through this, quantitative characteristics such as concentration and purity can be identified.
OPTIZEN POP, which can be used widely from general analysis experiments to specialized research fields, guarantees accurate measurement and excellent reproducibility, providing reliable results in various fields such as environment, biotechnology, and chemistry.
OPTIZEN POP provides 4 measurement modes (Photometric Mode, Quantitation Mode, Spectrum Mode, Kinetics Mode), and the user can select and use the corresponding mode according to the purpose of measurement. Using the S/W built into the equipment, touch screen interface, and application software, it helps the user to use the equipment very easily.
Product Features
– User convenience
All functions of the existing PC software are loaded into OPTIZEN POP for faster and more convenient use.
– Amazing measurement speed
The fast and flexible software delivers the best results at analysis speeds up to 1.5 times faster than conventional products.
– Compact size
The compactly designed OPTIZEN POP increases the efficiency of the laboratory space.
– Prompt service
Based on OPTIZEN’s proprietary technology, service is available from design to manufacturing in Korea.
– Wide scalability
Designed to enable high-precision/high-resolution measurement in a wide range from ultraviolet to visible light, it can be used in various application fields.
– Emotional design
Now you can enjoy another pleasure with emotional design
Product function
– Help is presented in an easy-to-understand graphical format.
– If you register the information being measured, analyzed, or completed as a favorite, you can quickly and easily call it up and work with it.
– Can be used in conjunction with PC through OPTIZEN View
– It is possible to measure in an optimal state by checking the operating time of the equipment, the preheating status of the lamp, and the accumulated usage time in real time.
– It is possible to select the cell type and monitor the measurement without entering a mode, and the quick menu cell type icon changes depending on the cell type status or location, making it easy to check the current cell status.
– It employs a temperature measurement system as standard, allowing for temperature confirmation/recording at the moment of analysis.
– It supports convenient voice guidance and volume control function.
– It comes equipped with a multi-cell system as standard, enabling automatic measurement of a large quantity of samples. -
BSC-1804IIA2 Biological Safety Cabinet, 6 feet, Class II Type A2
Includes:
•NSF 49 Certification for the 1st year
•UV lamp (1 pc)
•Sockets (2 pcs)
•Valves (2 pcs)
•Adjustable stand
Friendly Control Panel
•Color LED screen, show the air velocity, time, fan station, HEPA filter life and alarm in real time
Safe and Reliable, Energy-Efficient
•DC fan and LED light make the operation power consumption save 30%.
•Intelligent auto-supply system of imported blower ensures the change of air volume less than 10% when the resistance of filter increases 50% and enhance safety.
•The alarm system for safe operation height is interlocked with light. At the same time light is interlocked with sterilizing.
•Leak detection in cabinet, no leakage at 500Pa.
•UV light with set timer, safer and high efficiency.
Humanized design
•10°sloped front make it comfortable to operator.
•Negative pressure and double layers chamber around ensure non-leakage, non-pollution.
•Demountable circular-arc armrest can alleviate working tiredness and make it easy to transport.
•Front window adopts hanging lifting system (Imported from Japan) and more than 5mm thickness security glass with arbitrary positioning, high stability and convenient to sterilization when it closed.
•Front window can be cleaned all-over, solving the problem which front window can’t be cleaned inside
•Moveable working table with handle and support make it easier to clean collecting tank.
•There are two anti-splash spare sockets and four service port in the cabinet.
•Movable stainless steel worktable 4 liter capacity stainless steel collecting tank with below down valve, easy to collect water, cleaning and disinfection.
•Non-obstructive air return mode in the front suction channel .
•The adjustable leveling foot is without exposure thread.
ULPA filters
•USA HV ULPA Filter Medium, provide 99.9995% typical efficiency for particle size over 0.12 microns, and the materials is glass fiber.
• minimum ISO 4 air quality in the work area
•Unique Technology of non leakage
•Every ULPA filters will be tested to ensure non leakage.
ECO mode and power off memory function
•You need not to turn off BSC when stop experiment. You can close front window and BSC will turn to ECO mode to ensure cleanliness in working area. If opening front window, BSC will turn to normal mode immediately.
•If losing power unexpected, BSC will return to the station which before losing power when regain power. This will ensure the safety of operator. -
MS315/MS315T microbial shaking incubator (refrigerated)
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• MS315 button screen microbial shaking incubator (refrigerated)• MS315T touch screen microbial shaking incubator (refrigerated)OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
H3565-45-E SureTherm COâ‚‚ Incubator 45 Liter, with two shelves
Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and COâ‚‚Â control, Benchmark™s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C).
These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real timeâ€. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.*
* Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)
OPTIONAL ACCESSORIES:
•H3565-45-LCI IncuView LCI
•H3565-45-SH Extra Shelf
•H3565-45-SK Stacking Kit -
NanoOne Microspectrophotometer
NanoOne is a UV and Visible spectrophotometer, utilized to test purified nucleic acid and protein.With pre-installed software and touch screen, it can measure sample volume of 0.5~2ul, which is precise and repeatable. Sample is shaped liquid column between the upper and lower pedestals due to surface tension, it allows high concentration sample can be measured without dilution. Benefit from the working principle (200~800nm) NanoOne, can measure high concentration samples.The device equipped with cuvette slot to enable measure diluted sample in cuvette.
-
LYZ-211C Shaking Incubator, 970*565*480mm(265L); 2000ml*12
Integrated with incubator and shaker to save space and cost;
High quality steel shell, polished stainless steel chamber;
Large LCD screen to display temperature and shaking speed;
With operation data memory function to eliminate faulty operation;
Non-volatile memory saves settings during a power outage and automatically restarts the unit as originally programmed after power is restored;
Auto-stop operation when door is opened. Strong air spring rod with easy opening and closing;
Brushless DC motor, more stable and reliable;
With UV Sterilizer;
Equipped with leakage protection. -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. -
Water Purification System aquapuri 541UF
Pyrogen Free water, integrated model(Tap water to type I and III, no need tank) filters AP III AP IV UF Final Filter
-
Water Purification System aquapuri 541UV
TOC Free water integrated model(tap water to type I and III no need tank) API (TOC) AP II AP III(TOC) AP IV(TOC) UV and Final Filter
-
450L Stackable High-capacity Incubator Shaker(Refrigerated)
IS-5 incubator shakers feature Temperature, Shaking, CO2 Concentration, and Humidity controls, with capacity for flasks up to 5 L in volume. It’s stackable design helps maximize floor space, with the capability to stack up to three units high. Shaking diameter is available for both 26mm or 50mm.
MODEL:
• IS-5W(26mm, without CO2)
• IS-5CW(26mm, with CO2)
• IS-5C5W(50mm, with CO2)
OPTIONAL ACCESSORIES:
•IS-A1 50ML flask clamp
•IS-A2 100ML flask clamp
•IS-A3 150ML flask clamp
•IS-A4 200ML flask clamp
•IS-A5 250ML flask clamp
•IS-A6 500ML flask clamp
•IS-A7 1000ML flask clamp
•IS-A8 2000ML flask clamp
•IS-A9 3000ML flask clamp
•IS-A10 5000ML flask clamp
•IS-A50 25ML flask clamp
•IS-A11 Test Tube Rack, 40 hole ¢14mm for 5ml tube
•IS-A12 Test Tube Rack,40 hole¢16mm for 10ml tube
•IS-A23 Test Tube Rack, 40 hole¢18mm for 15ml tube
•IS-A24 Test Tube Rack, 27 hole¢22mm for 20ml tube
•IS-A42 Test Tube Rack, 21 hole¢30mm for 50ml tube
•IS-A20 Adjustable test tube rack,40 hole¢14mm for 5ml tube
•IS-A21 Adjustable test tube rack,40 hole¢16mm for 10ml tube
•IS-A30 Adjustable test tube rack,40 hole¢18mm for 15ml tube
•IS-A31 Adjustable test tube rack,27 hole¢22mm for 20ml tube
•IS-A32 Adjustable test tube rack,21 hole¢30mm for 50ml tube
•IS-A37 Adjustable test tube rack,24 hole¢30mm, for 300mm length tube
•IS-A13 96-Well Microplate Holder, Microplate Holer, can be mounted on platform of shakers
•IS-A35 Holder for Separating Funnel, Used for seperating funnel w/volume greater than 500ml;
•IS-A33 Infusion Bottle Clamp,500ml
•IS-A34 Infusion Bottle Clamp, 1000ml
•IS-A47 Sticky Pad, WxD:140x140mm
•IS-A62 Rack for Stacking Incubator Shakers
•IS-A63 Multifunction Spring PlatformWxDxH:899x539x81mm;
•IS-A71 Automatic replenisher, Automatically refill water to humidity tray
•IS-A72 RH Control system, including a water replenisher and humidity controller, which could keep the humidity in the chamber at the setting value.
•IS-A90 Water tank WxDxH:240x240x449mm;Used with IS-A71/A72;Capacity: 15L
•IS-A64 Remote Monitoring & Control System,Incl. advanced monitoring system and software for mobile phone -
MR9600-T-E SmartReader™ 96 Microplate Absorbance Reader with Incubation, 230V
Accuris SmartReader 96 Microplate 96 absorbance reader with incubation, 230V
-
OPTIZEN Alpha UV-VIS Spectrophotometer
OPTIZEN Alpha is a spectrophotometer that uses a double-beam method.
OPTIZEN Alpha can measure the transmittance or absorbance at each wavelength of a sample in ultraviolet and visible light bands to determine the quantitative characteristics such as concentration and purity.
OPTIZEN Alpha, which can be used widely from general analytical experiments to professional research fields, guarantees accurate measurement and excellent reproducibility and provides reliable results in various fields such as the environment, biotechnology, and chemistry.
The previous single beam type spectrophotometer has a weak point of error occurrence in measuring a sample, because of the movement of a light source by time lag in measuring the strength of between a reference light and a light from sample. To solve the problem, OPTIZEN Alpha was designed as a double-beam type spectrophotometer. The system utilizes an additional reference beam to improve the measurement performance by compensating the intensity fluctuation of its light source.
Product Features
– User Convenience
All functions of existing PC software are installed in OPTIZEN Alpha, making it faster and more convenient.
– Incredible Speed
Fast and flexible software delivers the best result with analytical speeds up to 1.5 times that of existing products.
– Rapid Service
Quick services are available as OPTIZEN Alpha is made in Korea from design conception to manufacturing based on the unique technology of K LAB Co., Ltd.
– Extensive Scalability
OPTIZEN Alpha is designed for high-precision/high-resolution measurement in widebands from ultraviolet to visible light and can be used in various applications.
– Compact Size
Compact OPTIZEN Alpha enhances the efficiency of the experimental space.
– Sensuous Design
Now, you can enjoy a greater level of pleasure with a sensuous design.
Main Charateristics
– A world-class measurement performance
– Wide-size color screen (ALPHA: 8”)
– Various cell compatibility and fast cell type choice
– Automatic measurement of lots of samples by equipping multi-cell.
– Convenient voice service and volume control
– Emotional design -
Water Purification System aquapuri 551UF
Pyrogen Free water, integrated model(Tap water to type I and II, no need tank) filters AP III AP IV UF Final Filter
-
Water Purification System aquapuri 551UV
TOC Free water integrated model(taTOCp water to type I and II no need tank) API (TOC) AP II AP III(TOC) AP IV(TOC) UV and Final Filter
-
Water Purification System aquapuri 551VF
UV/UF combined model integrated model(tap water to Type I and II, no need tank) Included Filters AP I(TOC) AP II AP III(TOC) AP IV(TOC) UF and UV, Final Filter
-
Z446-E Hermle Z446 Centrifuge, 230V
-HIGH CAPACITY 4 x 750ml swing out rotor,
– Up to 68 x 15ml or 28 x 50ml
-Ideal for Tissue Culture applications
-Advanced programming with automatic rotor recognition
-Available with refrigeration
The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,000 x g with full loads of up to 48 x 50ml or 68 x 15ml tubes.
Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.
Optional accessories:
•Z446-750 Hermle 4 x 750 swing out rotor with buckets
•Z446-04500 Hermle 4x500ml angle rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
C240/ C240P 245L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 245L volume.
MODEL:
• C240: 140℃ high heat sterilization
• C240P: 180℃ high heat sterilization