-
SCG-W3000 Chemiluminescence Imaging System
*Sale price valid for display unit only, while stock last
I. Introduction
SCG-W3000 is an imaging device that utilizes chemiluminescence technology and is equipped with a high-sensitivity cooled camera with 9 million pixels. It enables fast, accurate, and high-throughput detection and imaging of samples, and is widely used in fields such as life sciences, medicine, and environmental protection.
II. Features
Real-time Imaging: Present the changes in sample signals during the exposure process in real-time, capturing every detail of the shot. Overexposed areas will be indicated for samples that are overexposed.Time Imaging: After the exposure is completed, every frame image within the exposure time can be generated. Through precise retrospective adjustments, users can select any frame image within that exposure time as the final output.
Time Accumulation: For samples with insufficient exposure, users can choose to continue the exposure after the exposure ends, allowing the sample to obtain additional exposure effects based on the exposure time already accumulated.
Automatic Exposure: Intelligent exposure technology can quickly determine the optimal exposure time. With the functions of time imaging and time accumulation, users can obtain the best image results with just one operation.
-
SWE-FP Tissue Homogenizer Low Temperature (-50℃, Freezing Table)
*Sale price valid for display unit only, while stock last
Product Introduction
SWE-FP is a newly upgraded low-temperature homogenizer, which can reach a temperature as low as -50℃ in the chamber and also equipped with a freezing table.Adopt high-speed reciprocating motion of the vertical shaking system, the frozen sample in the grinding tube collides with the grinding bead, and the resulting grinding shear force and impact force completely break down the tissue. Up to 192 samples can be processed simultaneously in one minute, making it a dedicated device that meets the requirements of rapid processing of multi-sample.
Product Features
1. Slider drive, no wear shaft, noise stability and durability;
2. Equiped with low temperature freezing table. It can meet the needs of sample storage, electrophoresis, membrane transfer and other low-temperature experiments
3. Imported compressor,lowest cooling temperature of -50℃,low temperature grinding throughout the process,reducing degradation of proteins and RNA.
4. Up to 192 samples can be processed simultaneously in 1 minute (24 samples can be processed with standard),efficiently and effectively completing sample grinding with high throughput.
5. Multiple adapters to choose. -
SZY-2L Vacuum Aspirator
*Sale price valid for display unit only, while stock last
Product Introduction
The vacuum aspirator can collect and store various liquids. The objects of use include various cell culture dishes, test tube orifice plates and even experimental desktops to ensure the safety and tidiness of the laboratory.
Product Features
1. The built-in battery is convenient to bring into the sterile operating table；
2. The connection can be automatically closed when the collection bottle is full to prevent overflow；
3. Quick-connect fittings ensure secure installation of tubes and collection bottles；
4. Two control methods can control the suction by foot pedal and knob. -
SMB-PC Dry Bath (Programmable, Heating, Cooling)
*Sale price valid for display unit only, while stock last
Product Description:
This product is an advanced microcomputer-controlled dry bath incubator with a wide selection of metal blocks suitable for various test tubes, which can be widely used for sample preservation, enzymes preservation and reaction, pre-denaturation of DNA amplification and electrophoresis, serum coagulation, etc.
Normal Working Conditions:
Ambient temperature: 10°C~ 30°C
Relative humidity: ≤ 70%
Input power: AC100 ~ 240
AC frequency: 50 Hz/60 Hz
Output power: 24 V 6.25 A 150 W
Note: Before using the instrument, please confirm whether the working conditions meet the above requirements -
SMV-P Vertial Vortex Mixer
*Sale price valid for display unit only, while stock last
Product Introduction
The vertical mixer is suitable for general mixing scenarios in industries such as biology, medicine, and chemicals.
However, it is not recommended for use in cold storage.
Product Features
Rotaryoperation,gentle and thorough mixing
Adjustable speed range:10-80rpm
Accuratespeed control
Low noise
Various sizes of adapters can be freely combined, suitable for 1.5mL,2.0mL,5mL, 10mL, 15ml,and 50ml centrifuge tubes
Memoryfunction: The startup parameters are set to thelast settings before shutdown -
SMV-R Rotary Vortex Mixer
*Sale price valid for display unit only, while stock last
Product Introduction
The rotary mixer is suitable for conventional mixing scenarios in industries such as biology, medicine, and chemical engineering. However, it is not recommended for use in a cold storage.
Product Features
Rotary operation for gentle and thorough mixing
Adjustable angle range: 0-90 for single-layer adapter, 50°-90° double-layer adapter
Adjustable speed range: 0-80rpm
Accurate speed
Low noise
Multiple specifications of clips can be freely combined, suitable for 1.5mL, 2.0mL, 5mL, 10mL, 15mL, and 50mL centrifuge tubes
Memory function: the parameters at startup are the same as the last settings before the last shutdown -
SMV-4500B Vortex Mixer (Digital display,button)
*Sale price valid for display unit only, while stock last
Product Description
SMV vortex mixers series are used in the fields of life science, andphysical& chemical analysis for oscillation, mixing and stirring of sample tissues, cells, bacterialliquid, chemical reagents, etc.The vortex mixer has a variety of adapters suitable for 0.2mL~50mL centrifuge tubes, microplates, etc.
Features
1. Accurate point recognition of pressure sensor
2. Zero silicone foot mat, super shock proof, suitable for high-speed work
3. Adjustable speed, wide range setting ofspeed
4. A variety of vibration module adapters are available
5. Equiped with brushless motor longer lifespan and more durable -
SMS-200A Magnetic Stirrer (Heating)
*Sale price valid for display unit only, while stock last
Product Information
The magnetic stirrer is a laboratory instrument used for liquid mixing, mainly for stirring or simultaneously heating and stirring low-viscosity liquids or solid-liquid mixtures. Its basic principle is to use the principle of same-sex repulsion and opposite-sex attraction of the magnetic field to push the magnetically placed stir bar in the container to perform circular motion, thereby achieving the purpose of stirring the liquid. With the heating temperature control system, it can heat and control the sample temperature according to specific experimental requirements, maintain the required temperature conditions for experimental conditions, and ensure that the liquid mixing meets the experimental requirements.
Product Features
1. 10L stirring volume, increased magnetic force.
2. Equipped with heating temperature control system, heating and controlling sample temperature, with high temperature control accuracy.
3. Automatic and manual modes. Automatic search for stir bar.
4. Intelligent anti-jumping stir bar, it will automatically restart after the stir bar jumps.
5. LCD display, intuitive and clear, easy to operate.
6. .The side of the instrument can absorb the stir bar, which can avoid the stir bar from being lost frequently
7. Anti-collision, anti-scalding design, flame-retardant materials for safer use. -
SMP-2 Microplate Centrifuge (for PCR plate)
*Sale price valid for display unit only, while stock last
Product Description
Microplate centrifuge is a transient centrifuge specially designed for 96-well plates, which is convenient for separating the droplets hanging on the wall. The microplates are vertically loaded into the centrifuge cavity from the top slot of the centrifuge, and the liquid is kept at the bottom of the microplates under the action of surface tension, so there is no need to worry about leakage. Close the top cover of the centrifuge, and the rotor will be accelerated to 2200 rpm instantaneously.
Product Features
1. Can take 2 microplates at the same time without manual rotation.
2. The motor actively brakes to achieve a slow stop within 10s.
3. Inductive switch, stop when the door is opened. Can be operated with one hand
4. Bottom plate counterweight, lower center of gravity, no vibration when starting, more stable operation. -
SMC-5000F Mini Centrifuge
*Sale price valid for display unit only, while stock last
Product Description
This product is a new generation of mini centrifuge, the overall skeleton surface shape, novel and simple appearance. One-piece composite rotor, compatible with multi-channel and multi-standard centrifuge tubes. It has the function of stopping immediately after opening the cover, and the unique stop speed adjustment function can realize the free switching betweenemergency stop and slow stop, which can be widely used in the separation experiment of trace samples.
Features
1. Composite rotor, can centrifuge 0.1 mL, 0.2 mL, 8-stip tube, 0.5 mL, 1.5 mL, and 2 mL EP tube at the same time.
2. The speed is 5000 rpm, and the centrifugal force is 1700 g, with anti-skid and idling protection
3. There are two stop modes to choose from: opening the cover for emergency stop and slow stop, meeting the needs of different applications
4. Equipped with a brushless motor with long service life. -
DS-3D100 Multi-functional Shaker (Horizontal + Pendulum+ 3D)
*Sale price valid for display unit only, while stock last
Product Introduction
Shakers are commonly used in Western experiments such as blocking of blotting membranes, antibody incubation, washing, fixation, staining, and destaining of electrophoretic gels; they can also be used for shaking liquids in various centrifuge tubes, multi-well plates, petri dishes, and culture bottles. Mix well. The movement modes are horizontal, pendulum and three-dimensional composite, and the Servicebio shaker is equipped with LCD display, knob-type control keys and digital timing function.
Product advantages
1.Three independent modes: swing, horizontal, and 3D. In 3D mode, the mixing intensity can be set separately.
2.Automatically stops in a horizontal position after operation. Timer and power-off memory function.
3..Equipped with a stepper motor for precise speed control and long lifespan.
4.Large tray and large LCD screen for easy operation.
5.Rust-proof treatment on the base plate for durability. -
SVT-2 Electrophoresis System (Transfer)
*Sale price valid for display unit only, while stock last
Product introduction
This product can be used with SVE-2 vertical electrophoresis. The electric field is used to transfer the proteins, nucleic acids, etc. in the gel after electrophoresis to the transfer membrane, and then the charged particles are further analyzed and studied by means of biochemical analysis.
Product Features
a. Double plate structure, can be used with SVE-2 electrophoresistank.
b. The tank of the instrument is integrated injection molding with high transparency polycarbonate, it’s corrosion resistance, high transparency, consistent performance, etc..
c. The positive and negative electrodes of the transfer clip are distinct, with a handle function, which is easy to operate.
d. High transfer efficiency, transfer time is about 20-40min.
e. Strong structure can be synchronized with the ice bath cooling to avoid interference caused by overheating, so as to ensure reliable experimental results. -
SVE-2 Electrophoresis System (Vertical)
*Sale price valid for display unit only, while stock last
1.Product overview
Electrophoresis technology is widely used in biological research, analytical chemistry, clinical chemistry, toxicology, pharmacology, immunology, food chemistry and other fields.
In a DC electric field, the phenomenon in which charged particles move toward electrodes with opposite signs is called electrophoresis. Small molecules can be separated and analyzed by electrophoresis, and electrophoresis is commonly used in modern medicine to study proteins, nucleic acids, enzymes and even virus cells.
Electrophoresis can not only be used for protein separation and content determination, but also has many new applications in immunological experiments. For example: Hepatitis B antigen (HBAg) electrophoresis assay for the diagnosis of hepatitis B, alpha-fetoprotein (AFP) electrophoresis assay for the diagnosis of primary liver cancer, etc.
2. Product Features
a. Using the in-situ gel-making mode, the gel-making and running process can be completed without disassembling and assembling the electrophoresis glass, and it is compatible with the running and electrophoresis requirements of the pre-cast gel products of this model.
b. The glue base is specially designed and locked by non-spring buckles to avoid glue leakage caused by insufficient spring pressure or aging.
c. The uniquely designed card plate is matched with the whole gland, so that the glass plate can be sealed by squeezing the sealing strip, avoiding the phenomenon of liquid leakage due to the side card not being lifted in place.
d. It can be adapted to glass plates and glue-making combs with various thickness intervals (1.5mm, 1mm , 0.75mm) to meet the needs of different sample volumes.
e. This electrophoresis instrument requires less electrophoresis buffer, and a minimum of 300mL can complete electrophoresis experiments.
f. Can be used with SVT-2 transfer electrophoresistank.. -
SVL-2 Integrated Horizontal Electrophoresis System（Electrophoresis Tank + blue light transilluminator)
*Sale price valid for display unit only, while stock last
ProductOverview
SVL-2 integrated horizontal electrophoresis instrument is mainly used for rapid agarose electrophoresis separation experiments of small amounts of DNA and RNA samples.
Product Features
1. The gel maker mold is integrally formed, which can make four different sizes ofgel blocks.
2. Standard blue light transilluminator, with SPW-6S electrophoresis power supply, can directly observe the band during the electrophoresis process.
3. The transparent upper cover has a hole design, which is convenient for heat dissipation and observation.
4. Card slot limit function, accurate operation.
5. The electrode holder and electrode head are detachable, which is convenient for cleaning and maintenance. -
SPW-DSE Electrophoresis Power Supply (Dual Module, Programmable)
*Sale price valid for display unit only, while stock last
Product Introduction
This product is a rectifier that converts alternating current into direct current. It can convert alternating current into controllable constant voltage and constant current direct current to meet the needs of electrophoresis and other experimental production. It is widely used in biology, medicine and other fields, such as nucleic acid gel electrophoresis, Protein gel electrophoresis, Western Blot protein transfer and other experiments.
Product Features
1. Completely independent dual outputs, with the ability to set parameters separately.
2. Programmable function, capable of setting four working modes: constant voltage, constant current, voltage gradient, and current gradient.
3. Additional two sets of 12V outputs, suitable for use with blue light illuminator, gel loading lamps, and can be controlled separately.
4. Equippend with multiple abnormality alerts, including overvoltage, overcurrent, overload, variable load, and no load. -
8-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-B10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-B300: Volume Range: 50-300 μL, Increment: 1 μL
•SPIP-B1000: Volume Range: 100-1000 μL, Increment: 5 μL -
Single-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-2.5: Volume Range: 0.1-2.5 μL, Increment: 0.05 μL
•SPIP-10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-20: Volume Range: 2-20 μL, Increment: 0.1 μL
•SPIP-100: Volume Range: 10-100 μL, Increment: 1 μL
•SPIP-200: Volume Range: 20-200 μL, Increment: 1 μL
•SPIP-1000: Volume Range: 100-1000 μL, Increment: 5 μL
•SPIP-5000: Volume Range: 1000-5000 μL, Increment: 50 μL
•SPIP-10000: Volume Range: 1-10 mL, Increment: 100 μL -
Z600-S3-TC-E Hermle SIEVA-3-TC Filtration Centrifuge with external temperature control, 230V
-High-speed, up to 10,000 rpm
-Transparent lid
-Stainless steel housing, chamber and parts
-Perforated and non perforated basket available
-Optional connection for external temperature control
The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit.
Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Optional accessories:
•Z600-500-NP Hermle 500ml centrifugal basket, non-perforated
•Z600-500-P Hermle 500ml centrifugal basket, perforated
•Z600-S3-F7u Hermle Filter material PP DLW, 7um pore size, Pack of 10
•Z600-S3-F20u Hermle Filter material PP DLW, 20um pore size, Pack of 10
•Z600-S3-F30u Hermle Filter material PP DLW, 30um pore size, Pack of 10
•Z600-S3-F50u Hermle Filter material PP DLW, 50um pore size, Pack of 10 -
Z600-S3-E Hermle SIEVA-3 Filtration Centrifuge, 230V
-High-speed, up to 10,000 rpm
-Transparent lid
-Stainless steel housing, chamber and parts
-Perforated and non perforated basket available
-Optional connection for external temperature control
The SIEVA-3 Filtration Centrifuge is the perfect centrifuge for cake filtration. The powerful SIEVA-3 reaches speeds up to 10,000rpm/7,825 xg, and features a transparent viewing port in the lid for close monitoring of samples. The stainless steel housing and parts makes the SIEVA-3 corrosion resistant, and easy to clean. 500ml filtration baskets are available in both perorated and non perforated. Clarified liquids exit the unit via the drain located on the side of the unit.
Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Optional accessories:
•Z600-500-NP Hermle 500ml centrifugal basket, non-perforated
•Z600-500-P Hermle 500ml centrifugal basket, perforated
•Z600-S3-F7u Hermle Filter material PP DLW, 7um pore size, Pack of 10
•Z600-S3-F20u Hermle Filter material PP DLW, 20um pore size, Pack of 10
•Z600-S3-F30u Hermle Filter material PP DLW, 30um pore size, Pack of 10
•Z600-S3-F50u Hermle Filter material PP DLW, 50um pore size, Pack of 10 -
Z600-OL Hermle OLEUM Oil Testing Centrifuge, 230V ONLY
-ASTM compliant for petroleum testing
-Swing out rotor for pear shaped or conical ASTM tubes
-LCD display, control speed in rpm or rcf
The OLEUM Oil-Testing Centrifuge is our stand alone oil testing centrifuge for pear shaped or conical ASTM oil testing tubes. A 4-place swing out rotor reaches up to 3,000rpm, or 2,213 xg to determine the water content of your oil sample.
The OLEUM is equipped with a maintenance-free induction motor, stainless steel chamber, motor driven lid lock, and active imbalance detection and shutdown. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Optional accessories:
•Z600-OL-COM Hermle OLEUM Rotor package, complete with rotor, buckets and inserts
•Z600-OL-CTC Hermle Adapter for conical oil test tube, 2/pk
•Z600-OL-PTC Hermle Adapter for pear shaped oil test tube, 2/pkr -
Z496-K-UC Hermle CENTRIFUGE HIGH VOL UNDERBENCH 230V
-ULTRA HIGH CAPACITY,(4 x 1000ml, 98 x 15ml or 40 x 50ml)
-Accepts 500ml or 750ml blood bags
-Two models
-Floor-standing, with storage drawer
-Underbench (27.5″ height for use under the bench)
The Z496-K centrifuges offer the highest tube/bottle capacity in our line.
Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run.
Advanced microprocessor controls allow for instant rotor identification,
which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application.
A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for te storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory.
For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge.
Optional accessories:
•Z496-1000 Hermle SWING OUT ROTOR WITH RECTANGULAR BUCKETS 4 X 1000ML
•Z446-04500 Hermle 4x500ml angle rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-1050 Hermle 10 x 50ml Conical Rotor -
Z496-K Hermle CENTRIFUGE HIGH VOL FLOOR STANDING 230V
-ULTRA HIGH CAPACITY,(4 x 1000ml, 98 x 15ml or 40 x 50ml)
-Accepts 500ml or 750ml blood bags
-Two models
-Floor-standing, with storage drawer
-Underbench (27.5″ height for use under the bench)
The Z496-K centrifuges offer the highest tube/bottle capacity in our line.
Several rotors are available, including a popular 4 position swinging bucket rotor with a wide offering of accessories for the centrifugation of tubes, bottles, plates and blood bags. The high capacity rectangular buckets accept microplates directly or a variety of tube inserts for accomodating as many as 40 x 50ml conical or 96 x 15ml conical tubes per run.
Advanced microprocessor controls allow for instant rotor identification,
which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving up to 99 saved programs, the easy to use front panel can adjust accel/decel rates, time, and convert operation between rpm and rcf. The powerful refrigeration system, with a range of -20° to 40° C, also features a precool function that ensures the temperature of the chamber is optimized for any application.
A standard floor standing model is available (height: 38.6 in.) which includes a convenient lower drawer for te storage of frequently used rotors and accessories. In addition, a space saving “underbench” model (height: 27.5 in.) is available when under the counter storage is preferred. Both models are equipped with wheels for easy maneuverability around the laboratory.
For all your high capacity, high volume needs, the Z496-K floor standing series is the perfect centrifuge.
Optional accessories:
•Z496-1000 Hermle SWING OUT ROTOR WITH RECTANGULAR BUCKETS 4 X 1000ML
•Z446-04500 Hermle 4x500ml angle rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-1050 Hermle 10 x 50ml Conical Rotor -
Z036-HK-E Hermle Z36-HK Refrigerated Centrifuge
-Benchtop design, with the speed/power of a floor model
-Super-Speed capability, up to 65,395 xg
-Wide variety of high speed rotor options
The Z36 HK is the result of many years of experience in the design of universal centrifuges, high speed centrifuges and compact microcentrifuges. The result is a “Super-Speed” centrifuge with unmatched performance among benchtop centrifuges. A robust motor drive powers a variety of high speed angled rotors to speeds that would generally only be achievable in large, floor-standing ultra centirfuges. 2.0ml microtube samples can reach forces above 65,000xg, while 50ml samples, as high as 41,410xg.
In addition to its high speed capabilities, the Z36 HK doubles as a universal centrifuge with a 4 x 250ml swing out rotor (offering inserts for all common tube sizes) as well as a 2 x 3 position swing-out microplate rotor. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Optional accessories:
•Z366-250 Hermle 4 x 250ml swing out rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-1220H Hermle 12 x 1.5/2.0ml rotor, Hermetically Sealed
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Z032-HK-E Hermle Z32-HK Refrigerated Centrifuge
-Compact, Super Speed Centrifuge, up to 38,007 xg
-Also accepts a variety of low speed swing out rotors
-Powerful Refrigeration
The Z32 HK utilizes much of the technology of our popular Z326 series, with a larger and more powerful motor drive, providing increased speed up to 20,000 rpm (38,007 x g).
With 16 available rotor options, the Z32 HK is not only ideal for high speed seperations, it would also be classified as a “universal” centrifuge, offering economy angled and swinging bucket rotors for lower speed applications. Tubes from 0.2ml up to 85ml can be accepted, and rotors can quickly be exchanged without any required programming, utilizing the instant rotor identification system.
Despite an impressive capacity of up to 4 x 100ml (or 6 x 85ml), the Z32-HK is surprisingly compact. The refrigeration system is conveniently located behind the rotor chamber, resulting in narrow design of less than 16 inches wide. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Optional accessories:
•Z306-100 Hermle 4x145ml swing out rotor
•Z326-100H Hermle 4x100ml swing out rotor with buckets
•Z327-200 Hermle 4 x 200 ml swing out rotor, with 4 buckets
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-1220H Hermle 12 x 1.5/2.0ml rotor, Hermetically Sealed
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Z446-K-E Hermle Z446-K Refrigerated Centrifuge, 230V
-HIGH CAPACITY 4 x 750ml swing out rotor,
– Up to 68 x 15ml or 28 x 50ml
-Ideal for Tissue Culture applications
-Advanced programming with automatic rotor recognition
-Available with refrigeration
The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,000 x g with full loads of up to 48 x 50ml or 68 x 15ml tubes.
Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is
placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.
Optional accessories:
•Z446-750 Hermle 4 x 750 swing out rotor with buckets
•Z446-04500 Hermle 4x500ml angle rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Z446-E Hermle Z446 Centrifuge, 230V
-HIGH CAPACITY 4 x 750ml swing out rotor,
– Up to 68 x 15ml or 28 x 50ml
-Ideal for Tissue Culture applications
-Advanced programming with automatic rotor recognition
-Available with refrigeration
The Z446 universal centrifuge series offers the highest capacity of any benchtop Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,000 x g with full loads of up to 48 x 50ml or 68 x 15ml tubes.
Advanced microprocessor controls allow for instant rotor identification,which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display.
Optional accessories:
•Z446-750 Hermle 4 x 750 swing out rotor with buckets
•Z446-04500 Hermle 4x500ml angle rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Z366-K-E Hermle Z366 K Refrigerated Centrifuge, 230V
-4 x 250ml swing out rotor capacity,
up to 16 x 50ml and 40 x 15ml
-Advanced programming with auto-rotor recognition
-Optional high speed rotors, providing up to 24,000 xg
-Available with refrigeration
For applications requiring increased capacity over the Z306 or Z326 series
centrifuges, the Z366 series offer a unique “Mid-Range” swing out rotor that
accepts a variety of different tubes, including up to 12 x 50ml or 28 x 15ml.
Despite this step up in capacity, the Z366 maintains a surprisingly compact
design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.
In addition to the popular 4 x 250ml swing out rotor, a variey of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 6 x 3 position microplate rotor is also available, as well as a 4 x PCR strips (8-strips).
Advanced microprocessor controls allow for instant rotor identification,
which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Optional accessories:
•Z366-250 Hermle 4 x 250ml swing out rotor
•Z366-250-HC Hermle 4 x 250ml high capacity swing out rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Z366-E Hermle Z366 Centrifuge, 230V
-4 x 250ml swing out rotor capacity,
up to 16 x 50ml and 40 x 15ml
-Advanced programming with auto-rotor recognition
-Optional high speed rotors, providing up to 24,000 xg
-Available with refrigeration
For applications requiring increased capacity over the Z306 or Z326 series
centrifuges, the Z366 series offer a unique “Mid-Range” swing out rotor that
accepts a variety of different tubes, including up to 12 x 50ml or 28 x 15ml.
Despite this step up in capacity, the Z366 maintains a surprisingly compact
design, with the standard air-cooled model featuring a footprint of 17 x 20 inches.
In addition to the popular 4 x 250ml swing out rotor, a variey of additional rotors are also available. Angled rotors range from a 24 x 1.5ml micro rotor to a high capacity 6 x 250ml rotor. A 6 x 3 position microplate rotor is also available, as well as a 4 x PCR strips (8-strips).
Advanced microprocessor controls allow for instant rotor identification,
which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
Optional accessories:
•Z366-250 Hermle 4 x 250ml swing out rotor
•Z366-250-HC Hermle 4 x 250ml high capacity swing out rotor
•Z366-06250 Hermle 6×250 angle rotor
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Z327-K-E Hermle Z327-K Refrigerated Centrifuge, 230V
-Swing out rotors accept up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml)
-Swing out plate rotor accepts deepwell plates
-Extremely versatile, 17 rotor options
-Refrigerated model available (Z327-K)
-High speed rotors (up to 23,542 xg)
-Fixed angle rotors from 0.2 ml up to 85 mlBoth the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide!
Optional accessories:
•Z306-100 Hermle 4x145ml swing out rotor
•Z326-100H Hermle 4x100ml swing out rotor with buckets
•Z327-200 Hermle 4 x 200 ml swing out rotor, with 4 buckets
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-1220H Hermle 12 x 1.5/2.0ml rotor, Hermetically Sealed
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Z287-A-E Hermle COMPACT UNIVERSAL CENTRIFUGE 230V
-Multipurpose, 11 available rotor options
-Up to 14,000 rpm and 16,058 xg
-Swing out rotor options for tubes and plates
-Indicator Light, easily view cycle status
-Unique EZ-Scroll™ touch padThe Z287-A exceeds the limitations set forth by traditional microcentrifuges which are restricted solely to fixed angle rotors for microtubes. Instead, this compact, next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml. We’ve designed this centrifuge to be our most compact and economical. A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research.
Along with a broad range of available rotor options, the Z287-A introduces a convenient status indicator. Users can easily view the current state of the centrifuge from across the room. The LED illuminates to signify if the rotor is spinning, the run is completed or the centrifuge is idle in standby mode.
Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the EZ-Scroll touch wheel front panel can adjust accel/decel rates, and change the end of run alarm tone. Additionally this feature prevents debris buildup, leakage, and can be operated with gloves on. The Z287-A is a truly powerful and versatile centrifuge perfect for any research laboratory.
Optional accessories:
•Z287-0450H Hermle CONICAL SWINGOUT ROTOR 4 X 50ML
•Z287-0430H Hermle SKIRTED SWINGOUT ROTOR 4 X 50ML
•Z287-0810H Hermle SWING OUT ROTOR 8 X 10ML
•Z287-0810-A10 Hermle SPARE HOLDER 10ML FOR Z287-0810H PK2
•Z287-0810-A7 Hermle HOLDER 5/7ML FOR •Z287-0810H PK2
•Z287-02MP Hermle MICROPLATE SWINGOUT ROTOR 2X
•Z287-0650 Hermle CONICAL FIXED ANGLE ROTOR 6 X 50ML
•Z287-1215 Hermle FIXED ANGLE ROTOR 12 X 15ML
•Z287-0815 Hermle FIXED ANGLE ROTOR 8 X 15ML
•Z287-2420 Hermle FIXED ANGLE ROTOR 24 X 1.5/2.0ML
•Z287-24SC Hermle SPIN COLUMN FIXED ANGLE ROTOR 24 X 2.0ML
•Z287-1820 Hermle FIXED ANGLE ROTOR 18 X 1.5/2,0ML
•Z287-24HEM Hermle HEMATOCRIT TUBE ROTOR 24 PLACE -
Z307-E Hermle Z307 Centrifuge, 230V
-Swing out rotors accept up to 4 x 200ml (16 x 15ml or 8 x 50ml)
-Swing out plate rotor accepts deepwell plates
-High Speed microtube rotors (up to 18,624xg)
-Fixed angle rotors from 1.5/2.0ml up to 50mlThe Z307 compact universal laboratory centrifuge offers a wide range of applications covering clinical, research, and industrial laboratory use. The Z307 offers many accessories, including rotors for microplates and high speed fixed angle rotors for microtubes and centrifuge tubes up to 50 ml. The swing out rotors can load all common tubes such as blood collection tubes,15/50 ml tubes and even 200 ml tubes. This wide range of accessories makes the Z307 laboratory centrifuge indispensable in research laboratories and clinical hospital laboratories.
Optional accessories:
•Z306-100 Hermle 4x145ml swing out rotor
•Z326-100H Hermle 4x100ml swing out rotor with buckets
•Z327-200 Hermle 4 x 200 ml swing out rotor, with 4 buckets
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor -
Z216-MK-E Hermle Z216 MK Refrigerated Centrifuge, 230V
-9 rotor options with capacity up to 44 x 1.5/2.0ml
-High speed, 15,000 rpm/21,631 xg
-Powerful refrigeration, room temp. to 4°C in <10 min
-Accepts tubes from 0.2ml to 5mlCompact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of ten available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.
All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.
In the Z216-MK model a powerful, compressor driven cooling system maintains temperatures as low as -20°C and is designed to reach 4°C (from room temperature) in less than 10 minutes.
Optional accessories:
•Z216-1205 Hermle 12 x 5ml rotor (for Z216 series only)
•Z216-2420 Hermle 24 x 1.5/20ml rotor (for Z216 series only)
•Z216-2420H Hermle 24 x 1.5/2.0ml rotor, hermetically sealed (for Z216 series only)
•Z216-24HEM Hermle 24 x Hematocrit rotor (for Z216 series only)
•Z216-3020H Hermle 30 x 1.5/2.0ml rotor, hermetically sealed (for Z216 series only)
•Z216-3202 Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only)
•Z216-4420 Hermle 44 x 1.5/2.0ml rotor (for Z216 series only) -
Z216-M-E Hermle Z216 M Centrifuge, 115V
-9 rotor options with capacity up to 44 x 1.5/2.0ml
-High speed, 15,000 rpm/21,631 xg
-Accepts tubes from 0.2ml to 5ml
-Advanced controls with automatic rcf conversionCompact, quiet, and powerful are just a few of the features found on the Z216 series microcentrifuges. Add to this, the versatility of ten available rotor options, and the result is the ideal microcentrifuge for the modern molecular biology laboratory.
All common microtubes (0.2ml, 0.5ml, 1.5ml, 2.0ml) can be accepted as well as PCR strips, hematocrit tubes, and even 5.0ml centrifuge tubes. Advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone. Despite a remarkably small footprint, the Z216 series offers a uniquely designed 44 x 1.5ml dual row rotor, nearly doubling the capacity when compared to traditional microcentrifuges.
Optional accessories:
•Z216-1205 Hermle 12 x 5ml rotor (for Z216 series only)
•Z216-2420 Hermle 24 x 1.5/20ml rotor (for Z216 series only)
•Z216-2420H Hermle 24 x 1.5/2.0ml rotor, hermetically sealed (for Z216 series only)
•Z216-24HEM Hermle 24 x Hematocrit rotor (for Z216 series only)
•Z216-3020H Hermle 30 x 1.5/2.0ml rotor, hermetically sealed (for Z216 series only)
•Z216-3202 Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only)
•Z216-4420 Hermle 44 x 1.5/2.0ml rotor (for Z216 series only) -
Z206-A-E Hermle Z206-A Centrifuge, 230V
-Accepts tubes up to 50ml
-Compact, 11 x 14.5 inch footprint
-Suitable for urine and blood separations (including Platelet Poor Plasma)
-Optional adapters for all common blood collection tubesThe Z206-A Compact Centrifuge is suitable for a variety of applications inside both the clinical and research setting. Three angle rotor options are available permitting use with all common tube sizes from 0.2ml to 50ml. A unique 6 x 5ml swing out rotor is also available for clinical applications requiring horizontal separation within 5ml blood collection tubes.
Compatible rotors listed here: https://hermleusa.com/wp-content/uploads/2021/12/Z206-V1-8.20-SM.pdf
Optional accessories:
•Z206-0605 Hermle 6 x 5ml swing out rotor (for Z206-A only)
•Z206-0650 Hermle 6 x 50 rotor (for Z206-A only)
•Z206-1215 Hermle 12 x 15 rotor (for Z206-A only)
•Z206-1820 Hermle 18 x 1.5 rotor (for Z206-A only) -
Z207-M-E Hermle Z207-M microcentrifuge, 230V
– Unique EZ-Scroll™ touch pad
– High speed, up to 17,317 x g
– Compact, 11 in. wide
– Multiple rotor options for 1.5/2.0ml tubesThe Z207-M is the perfect microcentrifuge for laboratories with valuable limited space who require quiet, and powerful centrifugation.
The Z207-M’s compact design houses a powerful, maintenance free, induction motor that can reach up to 17,317 xg. Accompanied by Hermle’s easy to use control panel , the unique EZ-Scroll™ touch pad, gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-M features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily.
All common microtubes 0.2ml, 0.5ml, 1.5ml, 2.0ml can be utilized in the standard 24-place rotor, as well as in a hermetically sealed, 24 place rotor for labs requiring an aerosol tight enclosure when working with hazardous chemical, or biological, samples. An optional 18 place spin column rotor is also available.
With our Z207-M microcentrifuge, even the smallest laboratories can have high output with a small footprint.
Optional accessories:
•Z207-2420H Hermle 24 x 1.5/2.0ml rotor, hermetically sealed (for Z207-M only)
•Z207-24SC Hermle 24 x 1.5/2.0ml Spin column rotor (for Z207-M only) -
Z167-M-E Hermle Z167M microcentrifuge, includes 18 x 1.5/2.0ml rotor 230V
-Includes 18 place rotor for 1.5/2.0ml tubes
-High speed, up to 14,000rpm /15,994 xg
-Compact, 11 x 14.5 inch footprint
-NEW, LED status indicator
-Unique EZ-Scroll™ touch pad
The Z167-M Microcentrifuge is a powerful, compact, easy-to-use high speed microcentrifuge for labs looking to save valuable bench space, but not compromise on speed and power.
The Z167-M’s compact design houses a powerful, maintenance free, induction motor that can reach up to 14,000rpm/15,994 xg. The included rotor is an 18-placeAccompanied by Hermle’s easy to use control panel, the unique EZ-Scroll™ touch pad, gives you ease of control and a modern feel. Additionally, this model features a color changing LED status indicator that let’s you know what operating state the unit is in from a distance. Whether the unit is running, on standby, or in sleep mode, it is easy to tell from a far with this new feature. The advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf, in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed and a sleep mode to save energy.
Some of the safety features in sthe Z167-M include an automatic lid-lock that prevents it from being opened while the rotor is still in motion, a splash proof display, and a unique imbalance detection system designed to automatically power down the motor in the event of improper loading of the rotor, or any tube breakage.
The Z167-M is the perfect microcentrifuge for any lab. -
Z327-E Hermle Z327 Centirfuge, 230V
-Swing out rotors accept up to 4 x 200 ml (16 x 15 ml or 8 x 50 ml)
-Swing out plate rotor accepts deepwell plates
-Extremely versatile, 17 rotor options
-Refrigerated model available (Z327-K)
-High speed rotors (up to 23,542 xg)
-Fixed angle rotors from 0.2 ml up to 85 ml
Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide!
Optional accessories:
•Z306-100 Hermle 4x145ml swing out rotor
•Z326-100H Hermle 4x100ml swing out rotor with buckets
•Z327-200 Hermle 4 x 200 ml swing out rotor, with 4 buckets
•Z326-0650-LS Hermle 6 x 50ml rotor
•Z326-1215 Hermle 12 x 15ml rotor
•Z326-1205 Hermle 12 x 5ml rotor
•Z326-2420 Hermle 24 x 1.5ml rotor
•Z326-2420H Hermle 24×1.5/2.0ml rotor, hermetically sealed
•Z326-3015 Hermle 30 x 15 ml rotor
•Z326-3020H Hermle 30 x 1.5ml rotor
•Z326-4420 Hermle 44 x 1.5/2.0ml rotor
•Z326-02MP Hermle 2 x microplate rotor
•Z326-0650-HS Hermle 6 x 50ml Round rotor (12,000 rpm)
•Z326-0685 Hermle 6 x 85ml High Speed rotor (38°)
•Z326-1050 Hermle 10 x 50ml Conical Rotor
•Z326-1220H Hermle 12 x 1.5/2.0ml rotor, Hermetically Sealed
•Z326-2010 Hermle 20 x 10ml High Speed Rotor -
Z207-H-E Hermle Z207-H Compact Hematocrit Centrifuge, 230V
– Unique EZ-Scroll™ touch pad
– High speed, up to 16,058 x g
– Compact, 11 in. wide
– Holds 24 Capillaries
Due to its compact design the Z207-H Hematocrit Centrifuge is the perfect centrifuge for even the smallest of lab spaces. It is equipped with a hematocrit rotor for 24 x capillaries. Accompanied by Hermle’s easy to use control panel , the unique EZ-Scroll™ touch pad, gives you ease of control and a modern feel. An advanced microprocessor controls allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-H features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. -
Z207-A-CMB-E Hermle Z207-A-CMB Compact Centrifuge with Combination Rotor, 230V
– Combination rotor holds 4 x 15ml and 50ml in same rotor
– Up to 6,800 rpm and 4,394 xg
– Compact only 11 in. wide
– Unique EZ-Scroll™ touch pad
The Z207-A-CMB includes a convenient combination rotor that holds 4 x 15 ml and 4 x 50 ml tubes in the same rotor. With the combination rotor there’s no longer a need switch rotors, or use adapters to centrifuge 15 ml and 50 ml tubes for tissue culture. You can even process them simultaneously! Along with the unique combination rotor, the Z207-A-CMB features the unique EZ-Scroll™ touch pad which gives you ease of control and a modern feel. An advanced microprocessor control allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-A-CMB features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily. -
Z207-A-E Hermle Z207-A Centrifuge, with 8 x 15ml fixed rotor
-Includes 8 x 15 ml rotor
-Up to 6,800 rpm and 4,394 xg
-Compact only 11 in. wide
-Unique EZ-Scroll™ touch pad
The Z207-A Clinical Centrifuge includes a 8 x 15 ml rotor, and is the perfect centrifuge for any clinical laboratory. The Z207-A also features the unique EZ-Scroll™ touch pad which gives you ease of control and a modern feel. An advanced microprocessor control allow for setting/displaying of the rotational speed in either rpm or rcf in increments of 10. In addition to retrieving saved programs, the easy to use front panel can be used to adjust accel/decel rates, run time, and change the end of run alarm tone. There is also a momentary spin function that will run while the button is pressed. Additionally the Z207-A features a sleep mode to save energy by shutting off after a certain time if not being used while on, which can be toggled on or off easily.
Brochure: https://hermleusa.com/wp-content/uploads/2021/04/Z207A-V1-8.20-SM.pdf
