-
Thermal cycler (96GE)
• Electric hot lid, one-button lid opening design, ensure perfect fit between hot lid and consumables
• 75 ° turnable 10.1 inch screen, foldable during standby
•Faster ramping rate, more accurate temperature control -
Thermal cycler (96B)
• Manual hot lid, high-strength mechanical buckle, not easy to wear
• Small size, light weight, suitable for various complex experimental environments
• Unique rear air outlet design, multiple machines can be placed side by side without difficult heat dissipation -
Real-time PCR (BFQP-16)
• High-quality Thermoelectric Module specially designed and customized, multi-point control, brings excellent temperature control performance, and BFQP-96 has a maximum ramp rate of 6 ℃/s
• Long-life maintenance-free LED excitation light source, high-sensitivity photomultiplier tube(PMT) and professional optical fiber ensure high-intensity and high-stability signal transmission.
• Well by well scanning results in no fluorescence edge effect, and the instruments do not need ROX calibration. The single-channel scanning time is less than 1.5s.
• The analysis software is friendly, intuitive, concise, humanized and easy-to-operate. New experiments can be quickly created in multiple ways, and the results are automatically analyzed after the experiment.
• The report template can be customized, and supports data export in multiple formats to facilitate acc ess to the LIMS system.
• Electric automatic hot lid,no manual operation is required.
• With 7 inch touch screen and computer installed inside (windows operation system) -
Real-time PCR (BFQP-96)
• High-quality Thermoelectric Module specially designed and customized, multi-point control, brings excellent temperature control performance, and BFQP-96 has a maximum ramp rate of 6 ℃/s
• Long-life maintenance-free LED excitation light source, high-sensitivity photomultiplier tube(PMT) and professional optical fiber ensure high-intensity and high-stability signal transmission.
• Well by well scanning results in no fluorescence edge effect, and the instruments do not need ROX calibration. The single-channel scanning time is less than 1.5s.
• The analysis software is friendly, intuitive, concise, humanized and easy-to-operate. New experiments can be quickly created in multiple ways, and the results are automatically analyzed after the experiment.
• The report template can be customized, and supports data export in multiple formats to facilitate acc ess to the LIMS system.
• Electric automatic hot lid,no manual operation is required.
• With 10 inch touch screen and computer installed inside (windows operation system) -
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration.
