-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
MS110 microbial shaking incubator
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.
MODEL:
• MS110 microbial shaking incubator
OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
SM798R Floor-Standing High Capacity Grinder (with Freezing)
For grinding samples, it is a grinder with freezing function.
-
SM798 Floor-Standing High Capacity Grinder
For grinding samples, it is a floor-standing high capacity grinder.
-
MS86 microbial shaking incubator
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• MS86 microbial shaking incubatorOPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
CS315 CO2 shaking incubator (refrigerated)
For shaking culture of cell , it’s UV sterilization CO2 shaking incubator.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• CS315 CO2 shaking incubator(refrigerated)OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm ) -
C240/ C240P 245L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 245L volume.
MODEL:
• C240: 140℃ high heat sterilization
• C240P: 180℃ high heat sterilization -
C80/ C80P 85L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 85L volume.
MODEL:
• C80: 140℃ high heat sterilization
• C80P: 180℃ high heat sterilization -
C180/ C180P 180L CO2 incubator
For static culture of cell, it’s high heat sterilization CO2 incubator with HEPA filter and 185L volume.
MODEL:
• C180: 140℃ high heat sterilization
• C180P: 180℃ high heat sterilization -
MS315/MS315T microbial shaking incubator (refrigerated)
For shaking culture of microorganism, it’s UV sterilization stackable incubator shaker.25mm,26mm,50mm, three shaking throw can be chosen.Rotation speed is from 2-300rpm.MODEL:• MS315 button screen microbial shaking incubator (refrigerated)• MS315T touch screen microbial shaking incubator (refrigerated)OPTIONAL ACCESSORIES:• RF050 50mL flask clamp• RF125 125mL flask clamp• RF150 150mL flask clamp• RF250 250mL flask clamp• RF300 300mL flask clamp• RF1000 1000mL flask clamp• RF2000 2000mL flask clamp• RF3000 3000mL flask clamp• RF5000 5000mL flask clamp• RF3100 Universal spring mesh holder( 550×900 mm )• RF2100 Universal spring mesh holder( 510×410 mm )• RF23W Test tube rack holder(50MLx18;15MLx24)• RF24W Test tube rack holder(15MLx52)• RF25W Test tube rack holder(50MLx30)• RF96P 96 well deep well plate holder• RF3101 Peacock Blue Crystal sticky pad( 140×140mm )