-
IPS2050-P-T4 4 Arm Propeller, PTFE
This PTFE coated 4-arm propeller is useful for mid to high speed mixing. Fits Benchmark OS-20L and OS-40L Overhead Stirrers.
-
IPS2050-P-T3 Paddle w/flat holes, PTFE
Useful for gentle, mid to low speed mixing, this PTFE coated flat propeller has 3 holes.  Fits Benchmark OS-20L and OS-40L Overhead Stirrers.
-
IPS2050-P-T2 Centrifugal impeller, PTFE
Perfect for use is small mouth, round flasks, this PTFE coated propeller is designed for mid to high speed mixing. Fits Benchmark OS-20L and OS-40L Overhead Stirrers.
-
IPS2050-P-T1 One line propeller, PTFE
This one line, PTFE coated propeller is useful for low viscosity, mid or high speed mixing. Fits Benchmark OS-20L and OS-40L Overhead Stirrers.
-
IPS2050-P-S4 4 Arm Propeller, Stainless Steel
This stainless steel 4-arm propeller is useful for mid to high speed mixing. Fits Benchmark OS-20L and OS-40L Overhead Stirrers.
-
IPS2050-P-S3 Paddle w/flat holes, stainless steel
Useful for gentle, mid to low speed mixing, this stainless steel flat propeller has 3 holes.  Fits Benchmark OS-20L and OS-40L Overhead Stirrers.
-
IPS2050-P-S2 Centrifugal impeller, stainless steel
Perfect for use is small mouth, round flasks, this stainless steel propeller is designed for mid to high speed mixing. Fits Benchmark OS-20L and OS-40L Overhead Stirrers.
-
IPS2050-P-S1 One line propeller, stainless steel
This one line, stainless steel propeller is useful for low viscosity, mid or high speed mixing. Fits Benchmark OS-20L and OS-40L Overhead Stirrers.
-
IPS2050-20-E OS20L Overhead Stirrer, 20L
Benchmark™s Overhead Stirrers feature high torque and advanced digital microprocessor control for smooth mixing of low and medium viscosity samples.  Speed and run time are accurately set and monitored on the LCD screen. Both the 20L and 40L capacity models are supplied with a 4 arm stainless steel propeller, additional steel and Teflon accessories are available. A feed-through chuck holds accessory shafts firmly in place and is easily tightened and loosened without tools. The overhead stirrers are protected from damage by sensors that shut down operation in the case of high viscosity or obstruction, while a splash cover protects the connection mechanism from potential corrosion. Unlike most mixers, the Benchmark series is also supplied with a support stand and mounting hardware. The stirrer easily and securely attaches to the stand for compatibility with a variety of vessels, up to 24 inches high.
OPTIONAL ACCESSORIES:
•IPS2050-P-S1 One line propeller, steel
•IPS2050-P-S2 Centrifugal imepeller, steel
•IPS2050-P-S3 Paddle with holes, steel
•IPS2050-P-S4 4 arm propeller, steel
•IPS2050-P-T1 One line propeller, teflon
•IPS2050-P-T2 Centrifugal impeller, teflon
•IPS2050-P-T3 Paddle with holes, teflon
•IPS2050-P-T4 4 arm propeller, teflon -
H3770-HS-E Benchmark Digital Hotplate Stirrer
Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Our space efficient 7 x 7-inch hotplate/stirrer series features a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant monitoring system provides precise control of temperature with rapid heating and faster boiling times. In addition, the powerful motor drive system ensures efficient mixing in larger and more viscous samples.
Temperature and mixing speed can be viewed on the large digital display and a safety LED illuminates when the top plate temperature exceeds 50°C. An external temperature probe can also be used for applications that require precise control of sample temperature. The probe provides direct feedback to the microprocessor with constant monitoring and adjustments for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels with up to 5 L maximum stirring volume. An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.
OPTIONAL ACCESSORY:
•H3770-CS Clamp assembly
•H3770-CSTF Clamp assembly with inert teflon probe
•H3770-ROD Support Rod
•H3770-TP -
H3770-H-E Benchmark Digital Hotplate
Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Our space efficient 7 x 7-inch hotplate/stirrer series features a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant monitoring system provides precise control of temperature with rapid heating and faster boiling times. In addition, the powerful motor drive system ensures efficient mixing in larger and more viscous samples.
Temperature and mixing speed can be viewed on the large digital display and a safety LED illuminates when the top plate temperature exceeds 50°C. An external temperature probe can also be used for applications that require precise control of sample temperature. The probe provides direct feedback to the microprocessor with constant monitoring and adjustments for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels with up to 5 L maximum stirring volume. An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.
OPTIONAL ACCESSORY:
•H3770-CS Clamp assembly
•H3770-CSTF Clamp assembly with inert teflon probe
•H3770-ROD Support Rod
•H3770-TP -
H3710-HS-E Digital Hotplate Stirrer, 10×10″
Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Like our popular 7 x 7-inch series, these hotplates/stirrers feature a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant monitoring system provides precise control of temperature with rapid heating and faster boiling times. In addition, the powerful motor drive system ensures efficient mixing in larger and more viscous samples.
Temperature and mixing speed can be viewed on the large digital display and a safety LED illuminates when the top plate temperature exceeds 50°C. An external temperature probe can also be used for applications that require precise control of sample temperature. The probe provides direct feedback to the microprocessor with constant monitoring and adjustments for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels up to 20 liters (15 L maximum stirring volume). An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.
OPTIONAL ACCESSORY:
•H3770-CS Clamp assembly
•H3770-CSTF Clamp assembly with inert teflon probe
•H3770-ROD Support Rod
•H3770-TP -
H3770-TP Optional Temperature Probe
Optional Temperature Probe
-
H3770-ROD Optional Support Rod
Optional Support Rod
-
H3770-CSTF Clamp assembly with inert teflon probe, includes rod and clamps
Clamp assembly with inert teflon probe, includes rod and clamps
-
H3770-CS Clamp assembly with support rod and clamps for securing thermometers/probes
Clamp assembly with support rod and clamps for securing thermometers/probes
-
H3710-H-E Digital Hotplate, 10×10″
Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Like our popular 7 x 7-inch series, these hotplates/stirrers feature a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant monitoring system provides precise control of temperature with rapid heating and faster boiling times. In addition, the powerful motor drive system ensures efficient mixing in larger and more viscous samples.
Temperature and mixing speed can be viewed on the large digital display and a safety LED illuminates when the top plate temperature exceeds 50°C. An external temperature probe can also be used for applications that require precise control of sample temperature. The probe provides direct feedback to the microprocessor with constant monitoring and adjustments for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels up to 20 liters (15 L maximum stirring volume). An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.
OPTIONAL ACCESSORY:
•H3770-CS Clamp assembly
•H3770-CSTF Clamp assembly with inert teflon probe
•H3770-ROD Support Rod
•H3770-TP -
H3565-O2REG Regulator (optional) required for connecting to an Oâ‚‚ source
Regulator (optional) required for connecting to an Oâ‚‚ source
-
H3565-180HDO2-E SureTherm COâ‚‚ Incubator, 180 Liter with High Heat Decontamination, split window door and Oâ‚‚ control
Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and COâ‚‚Â control, Benchmark™s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C).
These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real timeâ€. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.*
* Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)
OPTIONAL ACCESSORIES:
•H3565-180-LCI IncuView LCI
•H2300-REG CO2 regulator
•H3565-O2REG O2 regulator -
H3565-180HD-E SureTherm COâ‚‚ Incubator, 180 Liter with High Heat Decontamination
Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and COâ‚‚Â control, Benchmark™s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C).
These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real timeâ€. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.*
* Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)
OPTIONAL ACCESSORIES:
•H3565-180-LCI IncuView LCI
•H2300-REG CO2 regulator -
H3565-180-LCI IncuView™ Integrated Microscope Shelf, 180 Liter
These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real timeâ€. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.*
* Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)
-
H3565-180-E SureTherm COâ‚‚ Incubator 180 Liter, with three shelves
Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and COâ‚‚Â control, Benchmark™s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C).
These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real timeâ€. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.*
* Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)
OPTIONAL ACCESSORIES:
•H3565-180-LCI IncuView LCI
•H2300-REG CO2 regulator -
H3550-45-SK Stacking kit for 45 liter incubator
Stacking kit for 45 liter incubator
-
H3550-45-SH Additional Shelf for 45 liter incubators, 1 each
Additional Shelf for 45 liter incubators, 1 each
-
H3565-45-LCI IncuView™ Integrated Microscope Shelf, 45 Liter
These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real timeâ€. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.*
* Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)
-
H3565-45-E SureTherm COâ‚‚ Incubator 45 Liter, with two shelves
Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and COâ‚‚Â control, Benchmark™s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C).
These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real timeâ€. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.*
* Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)
OPTIONAL ACCESSORIES:
•H3565-45-LCI IncuView LCI
•H3565-45-SH Extra Shelf
•H3565-45-SK Stacking Kit -
H3501-E Incu-Shaker™ CO2 Mini, with non-slip rubber mat platform
Ideal for the culturing of non-adherent cells, the Incu-Shaker CO2 Mini combines a precision CO2 incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture.
With our unique and proprietary heat distribution technology, the incubator provides the highest levels of temperature accuracy with minimal fluctuation (within 0.1°C). The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination.
A beltless motor drive provides a horizontally circular shaking motion at a consistent 19mm orbit. The included platform (9.5 x 11.5 in.) can be used for low speed shaking of a variety of laboratory vessels, including Erlenmeyer flasks, culture plates and media bottles. For high speed mixing, a patented MAGic Clamp platform is available that allows for magnetic attachment of flask clamps and tube racks.
OPTIONAL ACCESSORIES:
•H1000-MR Universal magnetic platform
•H1000-MR-50 50 ml flask clamp
•H1000-MR-CMB adjustable flask clamp, holds 125, 250, or 500 ml flasks
•H1000-MR-125 125 ml flask clamp
•H1000-MR-250 250 ml flask clamp
•H1000-MR-500 500 ml flask clamp
•H1000-MR-1000 1L flask clamp
•H1000-MR-MP microplate clamp
•H1000-MR-T14 14mm tube rack
•H1000-MR-T15 15 ml tube rack
•H1000-MR-T150H 15 ml tube rack, horizontal
•H1000-MR-T15H 1.5/2 ml tube rack, horizontal
•H1000-MR-T50 50 ml tube rack
•H1000-MR-T500H 50 ml tube rack, horizontal
•H1000-MR-1550 15 and 50 ml combination tube rack
•H1000-MR-TSR tilted holder for tube racks
•H1000-MR-T600 600 ml conical bottle rack
•H1000-P-125 125 ml flask dedicated platform
•H1000-P-250 250 ml flask dedicated platform
•H1000-P-500 500 ml flask dedicated platform
•H1000-P-MP microplate dedicated platform
•H1000-P-SP universal spring platform
•H2300-REG CO2 regulator -
H2505-70SH Extra shelf, stainless steel for H2505-70
Extra Shelf, stainless steel, for H2505-70
-
H2505-70 SureTemp™ Dual Convection Incubator, 70L
The new SureTemp™ Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class.
Each incubator is equipped with the SureCheck™ data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping.
Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection†technology, allowing users to choose between mechanical convection mode* (for exceptional temperature uniformity) or gravity convection mode* (for longer incubations where airborn contamination or drying of samples may be an issue). The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.
* Mechanical Convection: Incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperatue.
Gravity Convection: Eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature.
OPTIONAL ACCESSORIES:
•H2505-70SH Extra Shelf -
H2505-40SH Extra shelf, stainless steel for H2505-40
Extra Shelf, stainless steel, for H2505-40
-
H2505-40 SureTemp™ Dual Convection Incubator, 40L
The new SureTemp™ Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class.
Each incubator is equipped with the SureCheck™ data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping.
Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection†technology, allowing users to choose between mechanical convection mode* (for exceptional temperature uniformity) or gravity convection mode* (for longer incubations where airborn contamination or drying of samples may be an issue). The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.
* Mechanical Convection: Incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperatue.
Gravity Convection: Eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature.
OPTIONAL ACCESSORIES:
•H2505-40SH Extra Shelf -
H2505-130SH Extra shelf, stainless steel for H2505-130
Extra Shelf, stainless steel, for H2505-130
-
H2505-130E SureTemp™ Dual Convection Incubator, 130L
The new SureTemp™ Incubator series provides the highest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class.
Each incubator is equipped with the SureCheck™ data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping.
Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection†technology, allowing users to choose between mechanical convection mode* (for exceptional temperature uniformity) or gravity convection mode* (for longer incubations where airborn contamination or drying of samples may be an issue). The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.
* Mechanical Convection: Incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperatue.
Gravity Convection: Eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature.
OPTIONAL ACCESSORIES:
•H2505-130SH Extra Shelf -
H2300-SH Extra Shelf, 10.5 x 8 in. Stainless steel (autoclavable)
Extra Shelf, 10.5 x 8 in. Stainless steel (autoclavable)
-
H2300-REG Optional CO2 gas regulator (regulates gas pressure from the gas cylinder to the incubator)
Optional CO2 gas regulator (regulates gas pressure from the gas cylinder to the incubator)
-
H2300-HC2-E myTemp™ Co2 Mini Digital Incubator, includes 2 stainless steel shelves
At only 13 inches wide, the myTemp Mini CO2 is the smallest and most economical incubator for applications requiring CO2 gas control. Its small footprint makes the incubator ideal for use inside of biological safety cabinets, isolating sensitive cultures or for any laboratory simply trying to conserve bench space. With a thick layer of high efficiency insulation surrounding the chamber, the incubator is also ideal for transportation of cells. Once power has been disconnected, the incubator maintains temperature levels within 10% of the set parameter for up to 1 hour*. In addition
each model includes a 12V vehicle power adapter for operating the instrument in a car, boat, etc.
Both temperature and CO2 percentage are digitally adjustable and displayed in real time on the large LED control panel. This panel also features a “Cal†function, for easy in-lab calibration of the temperature or CO2. In addition, humidity (up to 80%) can be added to the chamber by inserting the included (stainless steel) humidity reservoir.
The CO2 level is constantly monitored using dual beam infrared sensing technology. In the event of a drop in CO2 , audible and visual alarms are triggered, notifying the user of the error.
Despite its small size, the incubator features a relatively large 20L chamber with the capacity for flasks and bottles up to 2 liters. Two removable, stainless-steel shelves are included. The shelves are perforated to improve airflow within the chamber.
* If disconnected from the CO2 supply, CO2 percentage decreases by approx. 1% /30 min
OPTIONAL ACCESSORIES:
•H2300-REG CO2 regulator
•H2300-SH Extra shelf -
H2265-SH Extra shelf, stainless steel for H2265-HC
Extra shelf, stainless steel for H2265-HC
-
H2265-HC-E myTemp™ 65 Heating and Cooling Incubator, includes two stainless steel shelves
The myTemp 65HC Incubator is designed to provide accurate and uniform temperature control from 0 to 60°C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications.
A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc.
With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature..
With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32″/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH).
OPTIONAL ACCESSORIES:
•H2265-HC Extra Shelf -
H2200-HC-E myTemp™ Mini, heat & cool (ambient -15 to 60°C), incl. 2 shelves
With digital temperature control, the MyTemp incubators provide convenient “set and walk away†operation, eliminating the need for external thermometers and repetitive “fine tuning†of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up (or cool down, -HC model only) while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel.
Despite a modest footprint of 14.5 x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 Liters. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation.
OPTIONAL ACCESSORIES:
•H2200-SH Extra shelf -
H2200-SH Extra shelf, 10.5 x 8 in. plastic (not autoclavable)
Extra shelf, 10.5 x 8 in. plastic (not autoclavable)