-
Longer Pump BT300-2J [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Medium Flow Rate Peristaltic Pump BT300-2J could be loaded with YZ1515X, YZ2515X, YZII15, YZII25 and DG15-24. The pump provides flow rates from 0.07mL/min to 1140 mL/min. The speed could be controlled through control panel, external control interface or RS485 interface. The running parameters are saved automatically. And the pump could be operated easily. -
C3310-0500, TransfMEM
TransfMEM-α Reduced Serum Medium. Pkg size: 500 ml/bottle
-
C3560-0500, Water, Cell Culture
Water, Cell Culture Grade
-
C3530-0100, Trypsin-EDTA solution A
Trypsin EDTA Solution A (0.25%), EDTA (0.02%), with Phenol Red
-
C3730-0100, Trypan Blue
Trypan Blue Solution, 5mg/ml in Saline
-
C3590-0500, dPBS, without Ca and Mg
Vivacell dPBS, without Ca and Mg, 500 ml/bottle <Amb Storage>
-
C3490-1000, Anti-mycoplasma, fungal, virus and bacterial spray (1L)
Pharmacidal, for disinfecting surfaces. Pkg size: 1 litre/bottle
-
C3490-0100, Anti-mycoplasma, fungal, virus and bacterial spray (100ml)
Pharmacidal, for disinfecting surfaces. Pkg size: 100 ml/bottle
-
C3481-0050, Aquaguard 2
Aquaguard-2 (Ordinary Water Baths)-Former: BI: 01-916-1E
-
C3480-0100, Aquaguard 1
Aquaguard-1 (Water-Baths in CO2 Incubators)-Former: BI: 01-867-1B
-
MRX A2000 Microplate Reader
The MRX A2000 can be used with 6 – 384 well plates and cuvettes and provides excellent measurement performance in the UV-VIS area.
User convenience has been improved by applying intuitive PC software. Endpoint, Kinetic, Spectral scanning, Well area scan modes are provided, and incubation and Shaking functions are also provided to enable various applications.
Main Charateristics:
– Quantitative analysis of nucleic acids and proteins, ELISA, and microbial growth experiments are possible by selecting a wavelength in the range of 200 – 999 nm
– Various workflows can be applied by providing endpoint, kinetic, spectral scanning, and well area scanning modes
– Compatible with 6 to 384 well plates
– Quantitative analysis of nucleic acids without dilution using the Micro-Volume Plates accessory
– Temperature-controlled down to 65°C and control of water vapor condensation to perform temperature-sensitive assays
– Linear, orbital and double orbital shaking
– Measurement possible through Cuvette port (Optional) (to be released in the second half of 21st)
Application:
– Endpoint or Kinetic ELISA
– Nucleic acid and protein direct quantification
– Microbial growth assays
– Cytotoxicity assay
– Cell proliferation assay
– Spectral scanning -
OPTIZEN NanoQ Microvolume Spectrophotometer
NanoQ is wide wavelength microvolume spectrophotometer with modern design and user convenience UI. It supplies extremely fast and easy quantitative analysis of nucleic acid and protein by UV-Vis absorption spectrophotometry. It provides microvolume sample measuring mode and cuvette measuring mode so can measure wide range of concentration. You can easily set over 20 measuring modes.
Main Charateristics:
– It is a small spectrophotometer featuring compact size and main unit control.
– A user can conduct the measurement precisely because it can be automatically set the pathlength according to the concentration.
– Can Add User Menu combined by user’s most accessed measure mode.
There is no need for measurement standby since it does not require a lamp warming-up.
– It can measure protein and conduct cell counting. *Cuvettes are only available in OPTIZEN NanoQ Plus.
– The measurement result can be saved or downloaded to a USB flash drive.
– A user can easily operate the system using the intuitive LCD screen and touch functions.
– It helps even novice users to drop the sample easily and accurately on the loading spot. -
OPTIZEN POP Single-Beam Spectrophotometer.
OPTIZEN POP measures transmittance or absorbance for each wavelength of a sample in the ultraviolet and visible ray bands, and through this, quantitative characteristics such as concentration and purity can be identified.
OPTIZEN POP, which can be used widely from general analysis experiments to specialized research fields, guarantees accurate measurement and excellent reproducibility, providing reliable results in various fields such as environment, biotechnology, and chemistry.
OPTIZEN POP provides 4 measurement modes (Photometric Mode, Quantitation Mode, Spectrum Mode, Kinetics Mode), and the user can select and use the corresponding mode according to the purpose of measurement. Using the S/W built into the equipment, touch screen interface, and application software, it helps the user to use the equipment very easily.
Product Features
– User convenience
All functions of the existing PC software are loaded into OPTIZEN POP for faster and more convenient use.
– Amazing measurement speed
The fast and flexible software delivers the best results at analysis speeds up to 1.5 times faster than conventional products.
– Compact size
The compactly designed OPTIZEN POP increases the efficiency of the laboratory space.
– Prompt service
Based on OPTIZEN’s proprietary technology, service is available from design to manufacturing in Korea.
– Wide scalability
Designed to enable high-precision/high-resolution measurement in a wide range from ultraviolet to visible light, it can be used in various application fields.
– Emotional design
Now you can enjoy another pleasure with emotional design
Product function
– Help is presented in an easy-to-understand graphical format.
– If you register the information being measured, analyzed, or completed as a favorite, you can quickly and easily call it up and work with it.
– Can be used in conjunction with PC through OPTIZEN View
– It is possible to measure in an optimal state by checking the operating time of the equipment, the preheating status of the lamp, and the accumulated usage time in real time.
– It is possible to select the cell type and monitor the measurement without entering a mode, and the quick menu cell type icon changes depending on the cell type status or location, making it easy to check the current cell status.
– It employs a temperature measurement system as standard, allowing for temperature confirmation/recording at the moment of analysis.
– It supports convenient voice guidance and volume control function.
– It comes equipped with a multi-cell system as standard, enabling automatic measurement of a large quantity of samples. -
OPTIZEN Alpha UV-VIS Spectrophotometer
OPTIZEN Alpha is a spectrophotometer that uses a double-beam method.
OPTIZEN Alpha can measure the transmittance or absorbance at each wavelength of a sample in ultraviolet and visible light bands to determine the quantitative characteristics such as concentration and purity.
OPTIZEN Alpha, which can be used widely from general analytical experiments to professional research fields, guarantees accurate measurement and excellent reproducibility and provides reliable results in various fields such as the environment, biotechnology, and chemistry.
The previous single beam type spectrophotometer has a weak point of error occurrence in measuring a sample, because of the movement of a light source by time lag in measuring the strength of between a reference light and a light from sample. To solve the problem, OPTIZEN Alpha was designed as a double-beam type spectrophotometer. The system utilizes an additional reference beam to improve the measurement performance by compensating the intensity fluctuation of its light source.
Product Features
– User Convenience
All functions of existing PC software are installed in OPTIZEN Alpha, making it faster and more convenient.
– Incredible Speed
Fast and flexible software delivers the best result with analytical speeds up to 1.5 times that of existing products.
– Rapid Service
Quick services are available as OPTIZEN Alpha is made in Korea from design conception to manufacturing based on the unique technology of K LAB Co., Ltd.
– Extensive Scalability
OPTIZEN Alpha is designed for high-precision/high-resolution measurement in widebands from ultraviolet to visible light and can be used in various applications.
– Compact Size
Compact OPTIZEN Alpha enhances the efficiency of the experimental space.
– Sensuous Design
Now, you can enjoy a greater level of pleasure with a sensuous design.
Main Charateristics
– A world-class measurement performance
– Wide-size color screen (ALPHA: 8”)
– Various cell compatibility and fast cell type choice
– Automatic measurement of lots of samples by equipping multi-cell.
– Convenient voice service and volume control
– Emotional design -
39400-2E Cryovial, Internal thread with Silicone washer seal, 2.0mL, Self-standing
*Special price valid while stock last.
1. Made from special polypropylene for storing biological material or cells at temperatures as low as -196°.(only in the gas phase of liquid nitrogen)
2. Packing: 100/bag, 10 bags/case
-
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. -
91696Opk Reversible Racks for Microtube, Polypropylene 96-well
91696Opk Reversible microtube rack, 1.5/2.0ml + 0.5/0.7ml, 96-well , orange (1/bag)
Reversible Racks for Microtube,Polypropylene and 96-well
1. Manufactured in Heavy-duty Polypropylene.
2. One side is designed to hold 1.5ml/2.0ml tubes,the other side holds 0.5ml/0.7ml tubes.
3. Racks are molded numbered on the surface for easy samples identification.
4. Idea for Freezing.Temperature range-80℃ to 121℃.Suitable for autoclaving at 121℃. -
Cryovial Storage Boxes for 1ml And 2ml Tubes, Polycarbonate
91300pk Cryovial storage box, PC, 100-well, Green color (10 racks)
Cryovial Storage Boxes for 1ml and 2ml Tubes, Polycarbonate
1. Manufactured in Polycarbonate provide ultra low temperature storage from -196℃ to 121℃
2. Fitting for storage of Cryovials from 1.0ml to 2.0ml in Liquid Nitrogen or Freezer
3. Alphanumeric grid on lid for easy identification of samples
4. With Air vents for storage of freezing
5. Covers are keyed to the base to prevent misalignment, with transparent cover and moverable grid.
6. Measurement: 10×10 Array box, measurement: 130 x 130 x 53mm(LxWxH,mm) -
Culture Tubes, Round Bottom,with Dual-position Cap,Graduated
Disposable Culture Tubes, Round Bottom, Rimed,with Dual-position Cap,with Graduation
1. Made of ultra clear virgin polypropylene or virgin polystyrene
2. Polystyrene tubes are transparent. Polypropylene tubes are opaque, break-resistant.
3. 12x75mm Polystyrene tubes can withstand centrifugation up to 1400xg and temperature at 80°C; Polypropylene tubes can be 3000xg and 120°C
4. 17x100mm Polystyrene tubes can withstand centrifugation up to 3000xg and temperature at 80°C; Polypropylene tubes can be 5500xg and 120°C
*Available with Printed Graduations and large white marking area for easy labelling.
Dual-position cap:
-Vented for aerobic cultures work
-Sealed for anaerobic cultures work
OPTIONS:
•82142: 12x75mm, 4mL, PS, 25/peel bag, 40 bags/case
•82442: 17x100mm, 12mL, PP, 25/peel bag, 40 bags/case -
Conical-bottom centrifuge tube
*Special price valid while stock last.
Conical-bottom Centrifuge tubes,Polypropylene
1. These conical-bottom tubes are made of ultra-clear polypropylene
2. Cap Materials: HDPE
3. Leakproof (-95kPa, 14 psi)
4. White printed graduations with large marking strip for labeling
5. DNa/RNa free, Non-pyrogenic
Volume:
- 34117F: 15ml 50tubes/pack, 10 packs/case
- 32104F: 50mL, 25tubes/pack, 20 packs/case