-
Longer Pump BT300-2J [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Medium Flow Rate Peristaltic Pump BT300-2J could be loaded with YZ1515X, YZ2515X, YZII15, YZII25 and DG15-24. The pump provides flow rates from 0.07mL/min to 1140 mL/min. The speed could be controlled through control panel, external control interface or RS485 interface. The running parameters are saved automatically. And the pump could be operated easily. -
Memmert Germany-Universal Oven UF110PLUS [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The universally applicable lab oven U is Memmert’s classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology. -
C3310-0500, TransfMEM
TransfMEM-α Reduced Serum Medium. Pkg size: 500 ml/bottle
-
C3560-0500, Water, Cell Culture
Water, Cell Culture Grade
-
C3530-0100, Trypsin-EDTA solution A
Trypsin EDTA Solution A (0.25%), EDTA (0.02%), with Phenol Red
-
C3730-0100, Trypan Blue
Trypan Blue Solution, 5mg/ml in Saline
-
C3590-0500, dPBS, without Ca and Mg
Vivacell dPBS, without Ca and Mg, 500 ml/bottle <Amb Storage>
-
C3490-1000, Anti-mycoplasma, fungal, virus and bacterial spray (1L)
Pharmacidal, for disinfecting surfaces. Pkg size: 1 litre/bottle
-
C3490-0100, Anti-mycoplasma, fungal, virus and bacterial spray (100ml)
Pharmacidal, for disinfecting surfaces. Pkg size: 100 ml/bottle
-
Memmert ICH260C Climate Chamber [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Setting temperature range: -10 to +60 °C
Working temperature range: from -10°C up to +60°C without humidity (not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over)
Working temperature range: from +10°C up to +60°C with humidity and/or light
Setting accuracy temperature: 0.1 °C
Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Works calibration certificate: standard values +10 °C and +37 °C, 60 % rh at +30 °C
Door: inner glass doors
Door: fully insulated stainless steel doors with 2-point locking (compression door lock)
Entry port: Entry port (silicone), 40 mm clear diameter, moisture tight, can be closed by a silicone stopper, standard position at the back
Humidity: humidity supply with distilled water from external tank by self-priming pump
Humidification: humidification by hot steam generator
Humidity: active humidifying and de-humidifying adjustable from 10-80 % rh with digital display of relative humidity – resolution of display 0.1 %, setting accuracy 0.5 %
Fan: forced air circulation
External Dimensions: w(D) x h(E) x d(F): 824 x 1552 x 685 mm (d +56mm door handle)
Internal Dimensions: w(A) x h(B) x d(C): 640 x 800 x 500 mm (d less 33 mm for fan)
Volume: 256 l
Max. number of internals: 9
Max. loading of chamber: 200 kg
Max. loading per internal: 20 kg -
C3481-0050, Aquaguard 2
Aquaguard-2 (Ordinary Water Baths)-Former: BI: 01-916-1E
-
C3480-0100, Aquaguard 1
Aquaguard-1 (Water-Baths in CO2 Incubators)-Former: BI: 01-867-1B
-
39400-2E Cryovial, Internal thread with Silicone washer seal, 2.0mL, Self-standing
*Special price valid while stock last.
1. Made from special polypropylene for storing biological material or cells at temperatures as low as -196°.(only in the gas phase of liquid nitrogen)
2. Packing: 100/bag, 10 bags/case
-
91696Opk Reversible Racks for Microtube, Polypropylene 96-well
91696Opk Reversible microtube rack, 1.5/2.0ml + 0.5/0.7ml, 96-well , orange (1/bag)
Reversible Racks for Microtube,Polypropylene and 96-well
1. Manufactured in Heavy-duty Polypropylene.
2. One side is designed to hold 1.5ml/2.0ml tubes,the other side holds 0.5ml/0.7ml tubes.
3. Racks are molded numbered on the surface for easy samples identification.
4. Idea for Freezing.Temperature range-80℃ to 121℃.Suitable for autoclaving at 121℃. -
Cryovial Storage Boxes for 1ml And 2ml Tubes, Polycarbonate
91300pk Cryovial storage box, PC, 100-well, Green color (10 racks)
Cryovial Storage Boxes for 1ml and 2ml Tubes, Polycarbonate
1. Manufactured in Polycarbonate provide ultra low temperature storage from -196℃ to 121℃
2. Fitting for storage of Cryovials from 1.0ml to 2.0ml in Liquid Nitrogen or Freezer
3. Alphanumeric grid on lid for easy identification of samples
4. With Air vents for storage of freezing
5. Covers are keyed to the base to prevent misalignment, with transparent cover and moverable grid.
6. Measurement: 10×10 Array box, measurement: 130 x 130 x 53mm(LxWxH,mm) -
Culture Tubes, Round Bottom,with Dual-position Cap,Graduated
Disposable Culture Tubes, Round Bottom, Rimed,with Dual-position Cap,with Graduation
1. Made of ultra clear virgin polypropylene or virgin polystyrene
2. Polystyrene tubes are transparent. Polypropylene tubes are opaque, break-resistant.
3. 12x75mm Polystyrene tubes can withstand centrifugation up to 1400xg and temperature at 80°C; Polypropylene tubes can be 3000xg and 120°C
4. 17x100mm Polystyrene tubes can withstand centrifugation up to 3000xg and temperature at 80°C; Polypropylene tubes can be 5500xg and 120°C
*Available with Printed Graduations and large white marking area for easy labelling.
Dual-position cap:
-Vented for aerobic cultures work
-Sealed for anaerobic cultures work
OPTIONS:
•82142: 12x75mm, 4mL, PS, 25/peel bag, 40 bags/case
•82442: 17x100mm, 12mL, PP, 25/peel bag, 40 bags/case -
Conical-bottom centrifuge tube
*Special price valid while stock last.
Conical-bottom Centrifuge tubes,Polypropylene
1. These conical-bottom tubes are made of ultra-clear polypropylene
2. Cap Materials: HDPE
3. Leakproof (-95kPa, 14 psi)
4. White printed graduations with large marking strip for labeling
5. DNa/RNa free, Non-pyrogenic
Volume:
- 34117F: 15ml 50tubes/pack, 10 packs/case
- 32104F: 50mL, 25tubes/pack, 20 packs/case
-
Disposable Vacuum Filter
Vacuum filter is a disposable filtering consumable instead of solvent filter. It is aseptically packaged and welded with filter membrane of corresponding specifications. It can be discarded after use, It saves the trouble of cleaning and disinfection and saves a lot of labor. The filter is made of PS material and used with diaphragm vacuum pump, which can be used for filtration For large capacity samples, the filtered samples can be directly entered into the collection bottle, and can be stored directly by screwing on the cover.
Application
• ideal for filtering tissue culture media, biological fluids, antibodies, etc
• aqueous solutions and other cell cultures
• sterilization and filtration of solutions that cannot be sterilized by high temperature and high pressure
Characteristic
•The low center of gravity design is more stable
•Large filtering area and faster filtering speed
•The concave design on the bottle body makes it easier to grasp, so it is easier to unscrew or tighten
•Wide bottle mouth design makes the solution easier to pour out
•The bottle body scale makes the reading more convenient
•Unique interface design enables it to be connected with various rubber hoses
•Easy to tear opening independent packaging design
•Each product has a batch number for easy identification and tracking
•Gamma ray sterilization is more thorough and reassuring
•No DNase, RNase, pyrogen
Volume:
•250ml
•500ml
•1000ml
#filter unit #filtration unit