-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
8-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-B10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-B300: Volume Range: 50-300 μL, Increment: 1 μL
•SPIP-B1000: Volume Range: 100-1000 μL, Increment: 5 μL -
Single-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-2.5: Volume Range: 0.1-2.5 μL, Increment: 0.05 μL
•SPIP-10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-20: Volume Range: 2-20 μL, Increment: 0.1 μL
•SPIP-100: Volume Range: 10-100 μL, Increment: 1 μL
•SPIP-200: Volume Range: 20-200 μL, Increment: 1 μL
•SPIP-1000: Volume Range: 100-1000 μL, Increment: 5 μL
•SPIP-5000: Volume Range: 1000-5000 μL, Increment: 50 μL
•SPIP-10000: Volume Range: 1-10 mL, Increment: 100 μL -
TOC-1500 Total Organic Carbon Analyzer
1. Equipped with conductivity detector to quantify TOC concentration.
2. In compliance with FDA-21 CFR Part11 requirements and USP, EP, JP and ChP.
3. Quick test, each analysis takes less than 3 minutes.
4. All historical records can be traced by searching test date.
5. Modular design for quick installation and easy maintenance. -
CLC-3200 HPLC
1. With multi solvent management system, each flow path is equipped with two mobile phases, and the mobile phase can be switched with one key as required.
2. Equipped with autosampler, it can get rid of the trouble of manual injection, inject samples continuously for 24 hours, and complete the test data faster.
3. Wide area temperature control column oven, stable temperature control up to 65 ℃, with good data reproducibility. -
CIC-D150 Ion Chromatograph
1. Auto-range conductivity detector to realize the imultaneous determination of 5ppb-100ppm concentration sample without setting the range.
2. A micro gas-liquid separator is set to remove the bubble from the eluent.
3. Set “intelligent maintenance”, the instrument can complete the flow path switch to the pure water path.
4. The mobile APP can remotely control the instrument on /off and observe the operation performance parameters of the instrument. -
UV-9000 Double Beam UV/VIS Spectrophotometer
Dual Beam Light Path Design
Powerful Stand-alone Operation System
Long Light Path Design
UV Analyst PC Software
16mm Rigid Aluminum Optical Base
One-button Automatic Calibration System
6 inches Large LCD display
Easy Data Output and Printing -
V-5000 Visible Spectrophotometer
1. Latest Microprocessor Controlling System
2. Precision 1200 lines/mm Grating Monochromator
3. Easy Data Output by USB/Parallel Port
4. Elegant Streamlined Design, Multi-function Operation System
5. Four Display Modes, One-Button Quick Switching -
ECO-S15 Ultrapure Water Machine
1. LCD (resolution: 128×64, dimension: 66×33mm) controlling system, intuitively display the system running state and various parameters.
2. 2 way online water quality sensor, detect the quality of RO water and ultrapure water respectively. And warn once water quality’s standard exceeding.
3. Cartridges replacing alarm function, based on time and water quality, show cartridges’ used and residual life.
4. Multiple alarm function: no feed water, full water, water quality’s standard exceeding, and cartridge life ending.
5. Auto self-flushing of RO membrane function, extend RO membrane’s life.
6. Level II password, protect all the parameters setting, and prohibit any unauthorized setting change.
7. Water dispensing function- timing and quality (time range: 1-99min, water quality range: 0.1-18.2MΩ.cm). -
DT35C Low Speed Table Centrifuge
1. HD large LCD display and the parameters can be revised during operation without shutdown.
2. Program group shortcut key, large storage space, can store 99 program.
3. Microcomputer control ,AC frequency conversion brush-less motor with fast speed and stable operation.
4. Steel Structure,centrifuge chamber made of stainless steel with Environmentally friendly anti-corrosion coating treatment.