-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
8-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-B10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-B300: Volume Range: 50-300 μL, Increment: 1 μL
•SPIP-B1000: Volume Range: 100-1000 μL, Increment: 5 μL -
Single-channel Pipette
*Buy 1 Free 1 Promotion, while stock lasts
A pipette is a device used to transfer liquid quantitatively. In the research of analytical testing, a pipette is generally used to transfer small or microliter amounts of liquid.
VOLUMES AVAILABLE:
•SPIP-2.5: Volume Range: 0.1-2.5 μL, Increment: 0.05 μL
•SPIP-10: Volume Range: 1-10 μL, Increment: 0.1 μL
•SPIP-20: Volume Range: 2-20 μL, Increment: 0.1 μL
•SPIP-100: Volume Range: 10-100 μL, Increment: 1 μL
•SPIP-200: Volume Range: 20-200 μL, Increment: 1 μL
•SPIP-1000: Volume Range: 100-1000 μL, Increment: 5 μL
•SPIP-5000: Volume Range: 1000-5000 μL, Increment: 50 μL
•SPIP-10000: Volume Range: 1-10 mL, Increment: 100 μL -
GX-224A Advanced Analytical Balance, 220g x 0.0001g with Internal Calibration
Advanced Sensor Technology
Smart SHS® is the latest advancement in our super hybrid design, construction and algorithms.
•Increased productivity via faster stabilization times (1 second in fast mode)
•Lower cost of ownership due to reduce number of parts and maintenance accessibility
Innovative Solutions
Electronically Controlled Load (ECL) does a self-diagnostic before performing an internal repeatability test without an external weight, all in less than a minute and a half.
•Dia-Check – the diagnostic result that validates if the balance critically passes or fails
•SD – standard deviation that allows for daily precision check, ideal for S.O.P.s
•QuickMin-S – determines minimum sample weight in any given environment
•Min-S Alert – alerts user to ensures they are operating within USP41 compliance
Impact Shock Detection (ISD)
•Impact-alert visually and audibly indicates the magnitudes of impact shocks
•Shock-log documents date, time, and shock level
Flow Rate Display (FRD)
Helps streamline and improve filling or dosing accuracy and precision.
•FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density
•FR-Compare – comparator that provides feedback if the flow rate is within limits
Good Data Management
•Internal/external calibration with easy one-touch button – performs and documents internal calibration
•Automatic Self-Calibration (ASC) – auto calibrates based on temperature and time interval
•Password-Protect – offers password-protection up to 11 users and 1 administrator
•GLP/GMP/GCP Compliance with full calibration reports
Leveling Made Easy
•Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination
•Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet
Simple User and Data Interface
•Six straightforward keys – ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO
•Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility
•Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional)
Cleanable Robust Construction
•Stainless steel pan and dust-plate can be easily removed for cleaning
•Easy to assemble anti-static breeze break on 0.001 readability models
•Die-cast aluminum housing provides extra stability and durability