-
USC0340M Multifunctional Ultrasonic Cleaner
Description:
– With sleeping mode to keep electrical energy saving
– Memory function will automatically save the most recently used setup parameters for next use.
– Ultra-low noise, adjustable time, adjustable power, frequency sweep function, degassing function,
memory function, sleeping mode.
– Time setting with 1-99 minutes and built-in heating to 60℃ , adjustable power range of 10%~100%.
Features;
– With large LCD display to show the precise time, temperature, and power level.
– Humanized carrying handle and drain valve for whole model.
– Built-in “sound insulation paste” keeps this series with low noise.
– With sweep function & degas function. -
RCHL-5-7 Low-temperature constant temperature bath
Feature
– Built-in new generation temperature control program to ensure stable operation of the equipment.
– With external circulating pump, can be established the second constant temperature field.
– Inteligent PID control, continuous work, easy operation.
– Fully enclosed compressor cooling system with overheating and over current protection
– With timing shut down function, shut down time can ve arvitrarily set within 0-999 hours. -
TOC-1500 Total Organic Carbon Analyzer
1. Equipped with conductivity detector to quantify TOC concentration.
2. In compliance with FDA-21 CFR Part11 requirements and USP, EP, JP and ChP.
3. Quick test, each analysis takes less than 3 minutes.
4. All historical records can be traced by searching test date.
5. Modular design for quick installation and easy maintenance. -
CLC-3200 HPLC
1. With multi solvent management system, each flow path is equipped with two mobile phases, and the mobile phase can be switched with one key as required.
2. Equipped with autosampler, it can get rid of the trouble of manual injection, inject samples continuously for 24 hours, and complete the test data faster.
3. Wide area temperature control column oven, stable temperature control up to 65 ℃, with good data reproducibility. -
CIC-D150 Ion Chromatograph
1. Auto-range conductivity detector to realize the imultaneous determination of 5ppb-100ppm concentration sample without setting the range.
2. A micro gas-liquid separator is set to remove the bubble from the eluent.
3. Set “intelligent maintenance”, the instrument can complete the flow path switch to the pure water path.
4. The mobile APP can remotely control the instrument on /off and observe the operation performance parameters of the instrument. -
UV-9000 Double Beam UV/VIS Spectrophotometer
Dual Beam Light Path Design
Powerful Stand-alone Operation System
Long Light Path Design
UV Analyst PC Software
16mm Rigid Aluminum Optical Base
One-button Automatic Calibration System
6 inches Large LCD display
Easy Data Output and Printing -
V-5000 Visible Spectrophotometer
1. Latest Microprocessor Controlling System
2. Precision 1200 lines/mm Grating Monochromator
3. Easy Data Output by USB/Parallel Port
4. Elegant Streamlined Design, Multi-function Operation System
5. Four Display Modes, One-Button Quick Switching -
ECO-S15 Ultrapure Water Machine
1. LCD (resolution: 128×64, dimension: 66×33mm) controlling system, intuitively display the system running state and various parameters.
2. 2 way online water quality sensor, detect the quality of RO water and ultrapure water respectively. And warn once water quality’s standard exceeding.
3. Cartridges replacing alarm function, based on time and water quality, show cartridges’ used and residual life.
4. Multiple alarm function: no feed water, full water, water quality’s standard exceeding, and cartridge life ending.
5. Auto self-flushing of RO membrane function, extend RO membrane’s life.
6. Level II password, protect all the parameters setting, and prohibit any unauthorized setting change.
7. Water dispensing function- timing and quality (time range: 1-99min, water quality range: 0.1-18.2MΩ.cm). -
DT35C Low Speed Table Centrifuge
1. HD large LCD display and the parameters can be revised during operation without shutdown.
2. Program group shortcut key, large storage space, can store 99 program.
3. Microcomputer control ,AC frequency conversion brush-less motor with fast speed and stable operation.
4. Steel Structure,centrifuge chamber made of stainless steel with Environmentally friendly anti-corrosion coating treatment.