-
Memmert Germany-Universal Oven UF110PLUS [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The universally applicable lab oven U is Memmert’s classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology. -
Memmert ICH260C Climate Chamber [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Setting temperature range: -10 to +60 °C
Working temperature range: from -10°C up to +60°C without humidity (not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over)
Working temperature range: from +10°C up to +60°C with humidity and/or light
Setting accuracy temperature: 0.1 °C
Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Works calibration certificate: standard values +10 °C and +37 °C, 60 % rh at +30 °C
Door: inner glass doors
Door: fully insulated stainless steel doors with 2-point locking (compression door lock)
Entry port: Entry port (silicone), 40 mm clear diameter, moisture tight, can be closed by a silicone stopper, standard position at the back
Humidity: humidity supply with distilled water from external tank by self-priming pump
Humidification: humidification by hot steam generator
Humidity: active humidifying and de-humidifying adjustable from 10-80 % rh with digital display of relative humidity – resolution of display 0.1 %, setting accuracy 0.5 %
Fan: forced air circulation
External Dimensions: w(D) x h(E) x d(F): 824 x 1552 x 685 mm (d +56mm door handle)
Internal Dimensions: w(A) x h(B) x d(C): 640 x 800 x 500 mm (d less 33 mm for fan)
Volume: 256 l
Max. number of internals: 9
Max. loading of chamber: 200 kg
Max. loading per internal: 20 kg -
MAGNUS (Europe) CR-5-ECO 5-Tray Blast Freezer/Chiller [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Capacity for 5x GN1/1 and 600×400 mm (EN1) trays, interstep 65 mm.
Stainless steel interior and exterior.
Rounded joints make the appliance easier to clean.
The interior parts can be easily removed and waste liquids are drained down the sloping cleaning drain.
Drip tray for condensation liquids.
Door with self-closing system, opening lock at 180º.
Alarm to avoid long time door openings.
Tropicalised unit 43ºC (65% humidity).
Forced draught refrigeration with optimised air circulation.
R-452A refrigerant.
Airtight compressor with fan-assisted condenser.
Internal runners and core probe included.
Automatic defrost. -
541-10000-11 Reax Top
*Price valid while stock lasts.
The classic with 5 mm shaking orbit
This model is particularly suitable for simple mixing tasks. In short-term operation mode, the shaking motion is triggered by pressure on the test tube tray. This mode is suitable for mixing up solutions, for example.
Persistent cell pellets can be dissolved gently but powerfully in continuous operation. With a speed of up to 3,200 rpm and a shaking orbit of 5 mm, reliable and uniform distribution of solids, and homogenization of highly viscous media are guaranteed. -
545-10000-02 Multi Reax
*Price valid while stock lasts.
The versatile model with a 3 mm shaking orbit
A high sample throughput is one of the daily challenges that analytical laboratories have to meet. Often several analyses have to be prepared simultaneously. To simplify these processes and the general workflow, a multi-vortexer has been developed.
It can accommodate between 12 (16-32 mm diameter) and 26 (10-16 mm diameter) tubes (Falcon tubes or Greiner tubes). Reaction vessels with snap-on lids (“Eppis” or Eppendorf cups) are also safely fixed. The 3 mm shaking orbit and a speed control between 150 and 2,000 rpm guarantee excellent mixing results.
The integrated timer (up to 999 minutes) enables the automatic termination of the shaking function. After the time has expired, a signal tone is emitted. In this way, you can be sure that your work process will proceed continuously, as several tasks have to be fulfilled at the same time. -
544-41200-06 Rotamax 120
*Price valid while stock lasts.
The compact one with a maximum loading capacity of 2 kg
Space-saving and with a load weight of up to 2 kg, this shaker can perfectly master all applications.
The variably adjustable speed control (20-300 rpm) and the orbit of 20 mm guarantee homogeneous distribution. Your applications can be carried out in continuous operation or by means of a timer (max. 120 minutes). -
543-12310-06 Unimax 1010
*Price valid while stock lasts.
The multipurpose model (Adaptable to the modular incubator system)
This shaker can be integrated into the modular incubation system, and it is therefore ideal for all temperature-controlled shaking tasks. By means of the integrated RS 232 interface and in conjunction with the software Hei-PROCESS, processes can be realized semi-automatically. In addition, it is possible to operate several shakers of this size in one climate chamber.
With a speed of 30-500 rpm and an orbit of 10 mm, samples are optimally kept in motion. Timedependent applications can be performed without any problems by using a timer (max. 99 h 99 min 99 S). In addition, the automatic restart (e.g. after a power failures) can be regulated by means of a button. -
544-12200-06 Titramax 1000
*Price valid while stock lasts.
The one with temperature-control
The largest model of the Titramax series contains all the features of the Titramax 100: a shaking orbit of 1.5 mm, speeds of up to 1,350 rpm, and a timer.
With a storage capacity of up to six multi-well plates, a higher number of samples can be processed. The option to integrate the Titramax 1000 into the modular
incubation system also allows temperature-controlled processes to be carried out without problems.
With this model, easy loading and removal of the plates can be carried out comfortably due to the recess and the spacings in the rubber mat.
