-
Polypropylene Chemical Storage Cabinet
Welded polypropylene and metal-free structure will ensure this unit not corrode. It is equipped with leakage-proof adjustable shelves, which could be detached out to be cleaned. Padlock could be used to provide extra security. This 45-Gallon capacity cabinet is designed to store strong corrosive chemicals, such as sulphuric acid, nitric acid, and acetic acid. It comes with clear labels to indicate corrosive chemicals stored inside.
• MCP 12-PP, 12 gallon
• MCP 26-PP, 26 gallon
• MCP 30-PP, 30 gallon
• MCP 45-PP, 45 gallon
• MCP 090-PG, 37 gallon
*Additional shelves available at additional charge. -
MC – Chemical Storage Cabinet
METHOD chemical storage cabinet series come with 3 points latch grip handles, air vent holes, baked epoxy finish, prominent hazard label at door, levelling screw at foot, and adjustable shelves. Manufactured in accordance with OSHA & NFPA standards.
*Suitable for mild acid and chemicals.
MODEL:
• MC-256-04, 4 gallon
• MC-259-12, 12 gallon
• MC-265-22, 22 gallon
• MC-207-30, 30 gallon
• MC-209-45, 45 gallon
• MC-286-60, 60 gallon
• MC-290-90, 90 gallon
• MC-295-110, 110 gallon
*Additional shelves available at additional charge. -
MC – Flammable Storage Cabinet
METHOD flammable storage cabinets offer safe, dependable flammable liquid storage and protection. We manufacture and supply this series in accordance with OSHA and NFPA guidelines, and most are independently tested. This series is available in a variety of sizes.
MODEL:
• MC-156-04, 4 gallon
• MC-159-12, 12 gallon
• MC-165-22, 22 gallon
• MC-107-30, 30 gallon
• MC-109-45, 45 gallon
• MC-186-60, 60 gallon
• MC-190-90, 90 gallon
• MC-195-110, 110 gallon
*Additional shelves available at additional charge. -
Base Drum Heaters
Base heating is an effective and powerful way to heat up contents inside a drum or an IBC container. The base heater is perfect for heating viscous or semi-solid products and making them very easy to discharge from a drum or a container with minimal to no waste product.
MODEL:
• DHS-BDH120
• DHS-BDH300 -
Drum Heaters
Experience precise temperature control and protection with our Drum Heater. Velcro-fastened for a secure fit, it offers flexible options, advanced temperature control, and insulation jackets for indoor and outdoor use. Customize your settings with ease. Upgrade your drum and tank heating solutions today.
MODEL:
• DHS-V1183/OM
• DHS-V1185/OM -
Wheeled Spill Kits
Spill kits are personal protective equipment (PPE), cleaning and leakage equipment to be used in case of a spill, leak or other discharge of oil or chemical.
MODEL:
• SKT-W120L
• SKT-W240L -
Spill Deck
For a lower profile containment, use spill decks to make handling much easier. This can lower drum tops so that they are not dangerously close to eye level.
MODEL:
• SPP300, 1 drum
• SPP301, 2 drums
• SPP303, 4 drums -
Spill Pallets
Using this unit can help with storage and transportation of oil drums, chemical barrels and other containers you need for spill prevention and control. The unit comes with a hexagonal drain plug that facilitates drainage. Its overlay structure saves space and transportation costs.
MODEL:
• SPP202, 2 drums
• SPP304, 4 drums -
Downdraft Ductless Fume Hood / DLF-SL100V1
Designed with portability and functionality in mind, Starlinx Ductless Fume Hood meets all modern laboratory needs. With unrestricted viewing from all sides, this fume hood is a perfect unit for educational and demonstration purposes.
Safety is also assured with a filtration system consisting of honeycomb-activated carbon filters designed to neutralize chemical fumes emitted from lab activities. -
Mini Ductless Fume Hood / DLF-076XP
If you have a need for a compact ductless fume hood, this model may be an excellent choice for your application. The unit is available with an activated carbon filter. The small size and low power consumption of this unit make it easy to move and transport if required.
-
Mobile Ductless Fume Hood / DLF-120XP
If you have a need for a compact ductless fume hood, this model may be an excellent choice for your application. The unit is available with an activated carbon filter. The small size and low power consumption of this unit make it easy to move and transport if required.
-
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. -
MCP-12-PP Polypropylene Chemical/Corrosive Acid Storage Cabinet. 12 Gallons (46 Litres). (Sulphuric/Acid/Nitric Acid).
Welded polypropylene structure
Corrosion proof
Equipped with leakage-proof adjustable shelves, which are removable for easy cleaning
Padlock could be used to provide extra security
Recommendable for storage of strong corrosive chemicals, such as sulphuric acid, nitric acid, and acetic acid
Clear labels to indicate corrosive stored inside -
MC-109-45DX Flammable Storage Cabinet with Lined Polypropylene Internal. 45 Gallons (170 Litres). Grey & Yellow.
Flammable storage cabinet with 3 points latch grip handles, air vent holes, baked epoxy finish, prominent hazard label at door, levelling screw at foot, and adjustable shelves. Manufactured in accordance with OSHA & NFPA standards.
-
MC-209-45DX Chemical Storage Cabinet with Lined Polypropylene Internal. 45 Gallons (170 Litres). Grey & Blue.
This chemical storage cabinet series come with 3 points latch grip handles, air vent holes, baked epoxy finish, prominent hazard label at door, levelling screw at foot, and adjustable shelves. Manufactured in accordance with OSHA & NFPA standards.*Suitable for mild acid and chemicals.