-
BioBase FIM20 Ice Maker [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Model: FIM20
Ice Making Capacity(kg/24h): 20
Ice Storage Capacity(kg): 10
Ice Shape: Small particle of irregular snow ice
Input Current(W): 280
Way of Condensation: Air cooling
Ambient Temperature: 10~35℃
Water Temperature: 2~15℃
Tank Shell: Stainless steel
Compressor: Donper
Refrigerant: R290
Accessories included: Water inlet pipe*1, Drainage pipe*1
Power Supply: AC220V±10%, 50/60Hz -
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. -
TRUZCARE LATEX EXAMINATION GLOVE POWDER-FREE (1000 Pieces) MOQ: 6 UNITS
Features:
– Latex material
– Powder-free design
– Suitable for examination purposes
– Offers dexterity and sensitivity
– Available in sizes S, M, and L -
TRUZCARE NITRILE EXAMINATION GLOVE POWDER-FREE, 3.5G, CHEMICAL RESISTANCE, BLUE (1000 Pieces) MOQ: 7 UNITS
Features:
– Material: Nitrile
– Powder-Free: Yes
– Thickness: 3.5G
– Color: Blue
– Chemical Resistance: Yes
– Size Options: S, M, L -
TRUZCARE VINVYL EXAMINATION GLOVE POWDER FREE, BLUE (1000 Pieces) MOQ: 7 UNITS
Features:
– Material: Vinyl
– Type: Examination Glove
– Powder-Free: Yes
– Color: Blue -
GX-224A Advanced Analytical Balance, 220g x 0.0001g with Internal Calibration
Advanced Sensor Technology
Smart SHS® is the latest advancement in our super hybrid design, construction and algorithms.
•Increased productivity via faster stabilization times (1 second in fast mode)
•Lower cost of ownership due to reduce number of parts and maintenance accessibility
Innovative Solutions
Electronically Controlled Load (ECL) does a self-diagnostic before performing an internal repeatability test without an external weight, all in less than a minute and a half.
•Dia-Check – the diagnostic result that validates if the balance critically passes or fails
•SD – standard deviation that allows for daily precision check, ideal for S.O.P.s
•QuickMin-S – determines minimum sample weight in any given environment
•Min-S Alert – alerts user to ensures they are operating within USP41 compliance
Impact Shock Detection (ISD)
•Impact-alert visually and audibly indicates the magnitudes of impact shocks
•Shock-log documents date, time, and shock level
Flow Rate Display (FRD)
Helps streamline and improve filling or dosing accuracy and precision.
•FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density
•FR-Compare – comparator that provides feedback if the flow rate is within limits
Good Data Management
•Internal/external calibration with easy one-touch button – performs and documents internal calibration
•Automatic Self-Calibration (ASC) – auto calibrates based on temperature and time interval
•Password-Protect – offers password-protection up to 11 users and 1 administrator
•GLP/GMP/GCP Compliance with full calibration reports
Leveling Made Easy
•Bright-bubble – large, easy-to-see, front mounted spirit level with LED Illumination
•Fly-thumbwheel is effortless and accessible, allows ergonomic adjustment with anti-slip feet
Simple User and Data Interface
•Six straightforward keys – ON/OFF, CAL, MODE, SAMPLE, PRINT, REZERO
•Reverse backlit LCD is a large display with great black and white contrast, provides excellent visibility
•Standard RS-232C & USB – Toggle between the Quick USB mode or Virtual COM mode (bi-directional)
Cleanable Robust Construction
•Stainless steel pan and dust-plate can be easily removed for cleaning
•Easy to assemble anti-static breeze break on 0.001 readability models
•Die-cast aluminum housing provides extra stability and durability