-
Mettler Toledo Quickflow Lite 4L – Vacuum Aspirator (30551511) [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Convenient, Quiet and Comfortable.
Aspirator QuickFlow Lite 4L
Continuous Flow
QuickFlow Lite’s continuous mode eliminates repetitive strain injury by allowing users to select continuous flow and the degree of suction.
Multiple Adapters
Whatever your application, QuickFlow Lite has an adapter to meet your needs. The single, multichannel and pipette adapters connect quickly.
Easy Assembly
QuickFlow Lite is designed for easy disassembly and reassembly. All parts that come into contact with liquids are easy to clean and autoclavable. -
Binder Model KB 53, Cooling incubators (9020-0199) [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -10 °C to 100 °C. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide range of applications. -
Eppendorf Centrifuge 5810 R Bundle [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
*Bundle includes:
i. Centrifuge 5810 R (keypad, refrigerated), with Rotor A-4-62 incl. adapters for 15/50 mL conical tubes (5811000363) x 1
Max. capacity of conical tubes per rotor: 36 × 15 mL/16 × 50 mL
ii. Adapter for 1 bottle 200 – 250 mL flat/ 175 – 225 mL conical, for 250 mL rectangular bucket in Rotor A-4-62 (5810770009) x 2
The high-speed Centrifuge 5810 R is one of the smallest 3 L benchtop centrifuge currently available. It is the workhorse for medium to high-throughput laboratories and combines versatility and high capacity to allow you to use both tubes and plates.
•Temperature range from -9 °C to 40 °C
•FastTemp function for fast pre-cooling
•Continuous cooling maintains a constant temperature after the run has been completed – your samples stay cool
•ECO shut-off engages after 8 hours of non-use to reduce energy consumption and to extend compressor life
•Dynamic compressor control (DCC) technology for optimized cooling performance -
Mettler Toledo SevenCompact pH meter S210 bundle [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Bundle includes:
i. SevenCompact pH meter S210 (30130862) x 1
ii. pH electrode InLab Solids Pro-ISM (51344155) x1
iii. InLab cable MultiPin-BNC/RCA 1.2m (30281896) x 1
Versatile and universal.
SevenCompact S210-Basic; pH/mV benchtop meter
Truly intuitive operation
Starting a measurement or calibration requires only a single keypress. Menu settings are intuitive, consisting of full sentences in 12 languages.
High-resolution color display
The 4.3 inch color display with its large digits and well arranged icons makes the relevant data identifiable at a glance.
Connectivity and peripherals
Boost the productivity of your instrument by connecting peripherals, such as a printer, PC, USB-stick and barcode reader. -
Mettler Toledo pH meter SevenDirect SD20 Solids Kit (30671559) [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Channel: Single-channel; Sensor: InLab Solids Pro-ISM
Straight to the point
SD20 pH meter with InLab Solids-Pro ISM pH/temperature sensor for pH measurement in solids and semisolids featuring automatic sensor recognition. The kit includes an efficient electrode arm and pH buffer sachets for initial calibration.
Mastered in no time
Large color touchscreen provides direct measurement and easy data entry. Instructions guide users through the sensor calibration process.
Tracks your records
The instrument stores data like timestamp, sample and sensor ID with every measurement and prints or exports records automatically.
Tough enough
Closed connector compartment and replaceable cover keep the instrument safe from dust and spills, even with sensors attached (IP54 in-use).
pH Sensor for Solid/Semi-Solid samples
InLab Solids-Pro ISM is a ph/temperature sensor for measurement in solid and semisolid samples. The spear tip made from hardened glass ensures easy sensor insertion into the solid sample. The open junction prevents clogging in challenging samples.
Electrode arm for efficient operation
The EasyPlace electrode arm makes placing the sensor in the sample or buffer container easy. Dedicated positions for cleaning and storage support correct sensor handling. Vertical and horizontal movements facilitate precise positioning, even with one hand.
Protect critical settings
A two-level user management protects the most important settings. Operators retain the flexibility to individually set preferences like language and screen brightness.
Display adapts to your needs
View detailed measurement information on one measurement screen – or focus on the result only and maximize readability with the uFocus mode. -
Halogen Moisture Analyzer HC103 (30216101) [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
All-rounder for Routine Moisture Tasks.
0.01 %MC (1 mg) readability, user guidance, real-time drying curve, multiple languages, standard and rapid drying program, method (20) and results (100) storage.
Intuitive OneClickTM Operation
The large 7″ color touchscreen offers an easy to navigate user interface. The operator is guided graphically step by step through the workflow.
Perfect for Lab and Production Floor
The robust design guarantees reliable results and a long instrument lifetime, whether you work in a busy laboratory or a harsh production environment.
Integrated Operator Training
The setup wizard gets you up and running straight away. The instrument tutorial shows you how to conduct a measurement and create a method. -
Mettler Toledo Precision Balances ML503T/00 (30243409) [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Big Performance in a Compact Footprint.
Reliable results and a wealth of useful features; 520 g capacity; 1 mg readability; 2 x USB; 1 x RS232; 1 x LAN; FACT automatic adjustment; user management; level warning with leveling guide; battery operation; 15 languages; 10 applications.
Renowned MonoBloc Weighing Cell
The high-performance MonoBloc weighing cell, coupled with FACT automatic internal adjustment, delivers consistently reliable weighing results.
User Management
Assign access rights so that operators see only the functions and applications they need, preventing errors and improving productivity.
Compact and Powerful
The compact design saves space whilst still offering you all the performance and features you need to complete weighing tasks with ease. -
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. -
Eppendorf Research® Plus Pipette
The Eppendorf Research plus is one of the safest and most ergonomic mechanical pipettes available. Meeting the highest needs of precision and accuracy while providing high flexibility via a large number of variants, the Research plus will become an indispensable companion in your lab. This micropipette is remarkably light, both in terms of weight and pipetting forces, which helps you to avoid hand and arm strain.
MODEL:
- 0.1 – 2.5 μL
- 0.5 – 10 μL
- 2 – 20 μL
- 10 – 100 μL
- 20 – 200 μL
- 100 – 1000 μL
-
Eppendorf Research® plus, 3-pipettes-pack
The Eppendorf Research plus is one of the safest and most ergonomic mechanical pipettes available. Meeting the highest needs of precision and accuracy while providing high flexibility via a large number of variants, the Research plus will become an indispensable companion in your lab. This micropipette is remarkably light, both in terms of weight and pipetting forces, which helps you to avoid hand and arm strain.
OPTIONS:
- Option 1: 0.5 – 10 μL, 10 – 100 μL, 100 – 1,000 μL
- Option 2: 2 – 20 μL, 20 – 200 μL, 100 – 1,000 μL