-
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. -
6038 2.2ml Deep well plate
6038 2.2ml Deep well plate 1/bag, Nature ,Sterile, 50/case
- In addition to storage and screening applications, the 2.2ml Storage Plate is also
- Recommended for the growth of bacterial cultures.
- 96 square wells and 2.2ml volume.
- SBS standard footprint
- U-shaped well bottom to aid resuspension
- Material : Polypropylene
-
2707Bpk 81 well Box PP for 1.5/2.0ml tubes
2707Bpk 81 well Box PP for 1.5/2.0ml tubes, Blue (10/pack)
- Freezer racks with separate lids are for all major brands of screw cap micro centrifuge tubes.
- The box holds up to 81 tubes and has an alpha numeric labeling area. Freezes to -90C.
- Have every kind of color, the convenient laboratory.
- classification management
- Material : Polypropylene
-
7111pk 8 Strips Low Profile PCR Tubes + Optically Clean Caps
7111pk 8 Strips LP PCR tubes + Optically clean caps
• 0.1mL
• Optimal and consistent heat transfer
• Low binding interior surface, ensuring maximum yield
• Low-profile design reduces dead space between cycler heated lid and sample, eliminating condensation on tube side, preventing reduction in PCR volume, and increasing reaction efficiency
• Can be cut into sections
• Packing: 120/box -
7103pk 8 Strips PCR tubes with flat caps
7103pk 8 Strips PCR tubes with flat caps Nature
• Suitable for all 0.2ml block thermal cyclers
• 0.25ml maximum recommended capacity
• Individually numbered tubes
• Can be cut into sections
• Large end tabs for easy removal
• Labelled for orientation
• Packing: 120/box -
7102pk QPCR 8-strip Tube & Caps
7102pk 8 Strips PCR tubes with Real time caps, Nature Colour
Each Ultra Clear Cap has a highly polished flat surface, providing an optically clear window. The caps are mounded from a specially formulated polypropylene that enhances signal detection by minimizing autofluorescence and maximizing transmission.
• Specially formulated ultra clear
• Polypropylene
• Highly polished
• Flat cap design
• Packing: 120/box -
7001pk PCR Tubes
7001pk 0.2 ml PCR tubes with flat caps, Nature (1000/box)
-
Multi Mixture Rack for 0.5ml/1.5ml/50ml Tubes
Specifications
• PP test tube rack can be used for multipurpose in four face different test tubes diameter.
• Polypropylene racks and boxes suitable for use with 0.5ml, 1.5ml, 1.7ml, 2.0ml, 15ml, 50ml tubes
• Packing: 5/pack -
Ice Bucket and Ice Pan
Specifications
• Solid, molded in one piece, expanded polyvinyl chloride(PVC)
• Resistant to temperatures from -321°F(-196°C) to 200°F(93°C)
• Impervious to moisture or odors
• Superior insulation
• Lightweight
• Portable
• Unbreakable
• Long-Lasting -
6402pc 81 well Cryobox for LN2 Storage
6402pc 81 well Cryobox for LN2 Storage
• For storage to -190°C
• Holds up to 81 tubes
• Dimension: 5¼˝L x 5¼˝W x 21⁄16˝H, fits all standard storage units.
• Clear lid
• Stackable and autoclavable
• Made of polycarbonate -
6264pk 81 well Cyro Box
6264pk 81 well Cyro Box for 1.5/2.0ml tubes (12 boxes/pack)
Features:•Cardboard material with water-repellent coating for moisture resistance.
•Capacity for 81 sample tubes (9×9 places for 1.5-2ml microcentrifuge and cryovials)
•Easy to write surface
•Dimension: D13.2×W13.2×H5.3cm
•Comes with grid inserts and dividers for sample tubes
•Markings on both the interior and exterior surfaces -
0296Bpk 96 well rack
0296Bpk 96 well rack PP for 0.2ml PCR tubes, Blue
• Freezer racks with separate lids are for all major brands of screw cap micro centrifuge tubes.
• The box holds up to 0.2ml / 96 tubes.
• Has an alpha numeric labeling area.
• Freezes to -90C.
• Material : Polypropylene
• Packing: 10 units/pack -
4301PC Basicpipette Aids
4301PC Basicpipette aids
• Continuous speed control wheel
• Blow-out and gravity dispense selection
• Dangerous fume or liquid protective hole
• Single-handed Operation, Self-inverted on the bench
• UV-resistant housing, Complies with CE and RoHS
• Light-weighted; 167g, including a lithium battery
• Battery Lidicator
• Helix Switch Close-knit
• Other bands to serve as reference points.
#pipette gun #pipette controller