-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Atomic Absorption Spectrophotometer
Flame AAS
Single beam
Holographic diffraction grating with 1800 lines/mm
Slit: 0.1, 0.2, 0.4, 0.7, 1.4, 2.0 nm
Wavelength Accuracy: ±0.3 nm
Automated 4-lamp turret
Photomultiplier tube detector
Working mode: T, A, C
Deuterium (D2) Background Correction -
Balance TA2204
Display: 4.3 inch touch screen
Capacity & Readability: 0.1mg/220g
Calibration: Internal
Weighing Units: g, ct, oz, lb, ozt, N
Pan Size: 85mm
Stabilization Time: ≤4 seconds
Communication: USB
Assembled Dimensions & N.W.: 210*360*330mm/6KG -
Balance TA205C
Display: 4.3 inch touch screen
Capacity & Readability: 0.01mg/20g
Calibration: Internal
Weighing Units: g, ct, oz, lb, ozt, N
Pan Size: 85mm
Stabilization Time: ≤4 seconds
Communication: USB
Assembled Dimensions & N.W.: 210*360*330mm/6KG -
Omron button pH meter S-610L
Range: (-2.00-18.00)pH
Accuracy: ±0.02pH
mV: -1999.9mV-0-1999.9mV
Temperature: 0-100℃
Accuracy: ±0.01pH(S-610H) -
Touchscreen pH meter T-710L
Range: (-2.00-19.99)pH
Accuracy: ±0.02pH
mV: -1999.9mV-0-1999.9mV
Temperature: -10-110℃
Accuracy: ±0.01pH(T-710H) -
Spectrophotometer E-2100V
Display: 7-inch capacitive touch screen
Optical: UV Visible single beam
Spectral bandwidth: 4nm
Wavelength range: 320-1100nm
Wavelength accuracy: ±1nm
Photometric range: 0-200%T, -0.3-3A
Stray light: ≤0.1%T@220nm, 360nm
Working mode: T, A, C, E
Light source: Tungsten Halogen -
Spectrophotometer C-7200
Display: 7-inch color screen with silicone button
Optical: UV/Vis double beam
Spectral bandwidth: 2nm
Wavelength accuracy: ±0.3nm
Photometric range: 0-200%T, -0.3~3A, 0-9999C
Stray light: ≤0.03%T@220nm, 360nm
Baseline flatness: ±0.003A
Working mode: T, A, C, E
Light source: Tungsten Halogen/Deuterium lamps -
OHAUS Defender 2000 D24PE60FL – 60kg x 0.01kg platform scale (30235933) [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The OHAUS Defender 2000 Series of bench scales offers OHAUS’ signature accuracy for commercial and industrial weighing applications at an unbeatable price. Depend on the OHAUS Defender 2000 Series when you need accuracy you can count on while maximizing your budget. -
Ohaus PR4202 Precision Balance [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Offering accuracy and repeatability in essential weighing applications in laboratory, industrial and education settings, PR Analytical and Precision Balances deliver competitive performance at an economical price. Featuring RS232 connectivity for easy communication, and a backlit display and a simple interface for uncomplicated operation, the PR is perfectly designed for your workplace. -
BF4000 SMOChem™ 1X Tris-Glycine-SDS Running Buffer Powde, 5 pouches/pack (For 5000 ml)
1X Tris-Glycine-SDS Running Buffer Powder is used for electrophoresis on Q-PAGE™ Tris-Glycine Precast Gel or Laemmli Tris-HCl gels in Tris-Glycine buffer system. It is convenient and universal for electrophoresis in Tris-Glycine buffer system.
-
BF2000 SMOChem™ 1X MOPS-SDS Running Buffer Powder, 5 pouches/pack (For 5000 ml)
1X MOPS-SDS Running Buffer Powder is used for electrophoresis on Q-PAGE™ Bis-Tris Precast Gel or polyacrylamide gels in Bis-Tris buffer system. It is convenient and universal for electrophoresis in Bis-Tris buffer system.
-
Q-PAGE™ TGN Precast Gel, Midi (10 x 10 cm), suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP5210: Midi, 12 wells, 10%
- QP5220: Midi, 15 wells, 10%
- QP5510: Midi, 12 wells, 4-15%
- QP5520: Midi, 15 wells, 4-15%
-
Q-PAGE™ TGN Precast Gel, Mini (10 x 8.3 cm), suitable for Bio-Rad® system
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP4210: Mini, 12 wells, 10%
- QP4220: Mini, 15 wells, 10%
- QP4510: Mini, 12 wells, 4-15%
- QP4520: Mini, 15 wells, 4-15%
-
Q-PAGE™ Bis-Tris Precast Gel, Midi (10 x 10 cm), suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP3110: Midi, 12 wells, 8%
- QP3120: Midi, 15 wells, 8%
- QP3310: Midi, 12 wells, 12%
- QP3320: Midi, 15 wells, 12%
- QP3510: Midi, 12 wells, 4-12%
- QP3520: Midi, 15 wells, 4-12%
-
Q-PAGE™ Bis-Tris Precast Gel, Mini (10 x 8.3 cm), suitable for Bio-Rad® system
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP2110: Mini, 12 wells, 8%
- QP2120: Mini, 15 wells, 8%
- QP2310: Mini, 12 wells, 12%
- QP2320: Mini, 15 wells, 12%
- QP2510: Mini, 12 wells, 4-12%
- QP2520: Mini, 15 wells, 4-12%