-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
OHAUS Defender 2000 D24PE60FL – 60kg x 0.01kg platform scale (30235933) [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The OHAUS Defender 2000 Series of bench scales offers OHAUS’ signature accuracy for commercial and industrial weighing applications at an unbeatable price. Depend on the OHAUS Defender 2000 Series when you need accuracy you can count on while maximizing your budget. -
Ohaus PR4202 Precision Balance [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Offering accuracy and repeatability in essential weighing applications in laboratory, industrial and education settings, PR Analytical and Precision Balances deliver competitive performance at an economical price. Featuring RS232 connectivity for easy communication, and a backlit display and a simple interface for uncomplicated operation, the PR is perfectly designed for your workplace. -
Luminicell Tracker™ 670 – Vascular Labelling Kit (Red)
Luminicell Tracker™ are biocompatible organic fluorescent nanoparticles, that can be used to fluorescently tag vasculature in living tissues and animals for visualization of vascular structures and study of inflammation and vascular leakage. These nanoparticles are highly biocompatible, designed for in-vivo imaging and animal studies, serve as excellent disease diagnostic reagents.
Under normal condition, these nanoparticles flow smoothly inside blood vessels. However, under inflammation or infection, they leak out in response to blood vessel permeability changes and form localized punctate aggregates to accumulate in surrounding tissues.
Through both one-photon and multi-photon fluorescence imaging, these trackers provide an optical window for deep tissue imaging with minimized bio-substrate absorption interference.
Product comes with different pack size:
• LCTV-670-30-ST (Standard): 200 nM, 0.5 mL
• LCTV-670-30-HS (Half vial): 200 nM, 0.25 mL
• LCTV-670-30-HS (Trial vial): 200 nM, 0.1 mL
#reagent
-
Luminicell Tracker™ 540 – Vascular Labelling Kit (Green)
Luminicell Tracker™ are biocompatible organic fluorescent nanoparticles, that can be used to fluorescently tag vasculature in living tissues and animals for visualization of vascular structures and study of inflammation and vascular leakage. These nanoparticles are highly biocompatible, designed for in-vivo imaging and animal studies, serve as excellent disease diagnostic reagents.
Under normal condition, these nanoparticles flow smoothly inside blood vessels. However, under inflammation or infection, they leak out in response to blood vessel permeability changes and form localized punctate aggregates to accumulate in surrounding tissues.
Through both one-photon and multi-photon fluorescence imaging, these trackers provide an optical window for deep tissue imaging with minimized bio-substrate absorption interference.
Product comes with different pack size:
• LCTV-540-30-ST (Standard): 200 nM, 0.5 mL
• LCTV-540-30-HS (Half vial): 200 nM, 0.25 mL
• LCTV-540-30-HS (Trial vial): 200 nM, 0.1 mL
#reagent
-
Luminicell Tracker™ 670 – Cell Labelling Kit (Red)
Luminicell Tracker™ are highly emissive fluorescent organic nanoparticles, built for rapid labelling of live cells with great biocompatibility. Once taken up by cells, they show intense luminescence with high photo-stability and possess durable signal for many cell generations with negligible cell toxicity.
Our cell labelling kit offers 10X brighter in fluorescence signal and 3X longer tracking duration as compared to competitive products. The labelled cells can be monitored using a variety of fluorescence techniques such as confocal microscopy, multi-photon microscopy and flow cytometry.
Luminicell Tracker™ 670 – Cell Labelling Kit contains organic nanoparticles that comes with novel aggregation induced emission (AIE) fluorescence materials with high brightness and unique spectral properties. These nanoparticles are highly biocompatible, can be used to tag cells for long term fluorescence cell experiments. Designed for applications in translational research, immune-oncology development, stem cell and gene therapy, drug development, 3D cell culture, in-vivo live-cell imaging etc.
Each standard labelling kit allows up to 100 experiments, whereas each half vial kit allows up to 50 experiments, and trial vial kit allows up to 20 experiments.
Product comes with different pack size:
• LCTC-670-30-ST (Standard, up to 100 tests): 200 nM, 0.5 mL
• LCTC-670-30-HS (Half vial, up to 50 tests): 200 nM, 0.25 mL
• LCTC-670-30-TS (Trial vial, up to 20 tests): 200 nM, 0.1 mL
#reagent
-
Luminicell Tracker™ 540 – Cell Labelling Kit (Green)
Luminicell Tracker™ are highly emissive fluorescent organic nanoparticles, built for rapid labelling of live cells with great biocompatibility. Once taken up by cells, they show intense luminescence with high photo-stability and possess durable signal for many cell generations with negligible cell toxicity.
Our cell labelling kit offers 10X brighter in fluorescence signal and 3X longer tracking duration as compared to competitive products. The labelled cells can be monitored using a variety of fluorescence techniques such as confocal microscopy, multi-photon microscopy and flow cytometry.
Luminicell Tracker™ 540 – Cell Labelling Kit contains organic nanoparticles that comes with novel aggregation induced emission (AIE) fluorescence materials with high brightness and unique spectral properties. These nanoparticles are highly biocompatible, can be used to tag cells for long term fluorescence cell experiments. Designed for applications in translational research, immune-oncology development, stem cell and gene therapy, drug development, 3D cell culture, in-vivo live-cell imaging etc.
Each standard labelling kit allows up to 100 experiments, whereas each half vial kit allows up to 50 experiments, and trial vial kit allows up to 20 experiments.
Product comes with different pack size:
• LCTC-540-30-ST (Standard, up to 100 tests): 200 nM, 0.5 mL
• LCTC-540-30-HS (Half-vial, up to 50 tests): 200 nM, 0.25 mL
• LCTC-540-30-TS (Half-vial, up to 20 tests): 200 nM, 0.1 mL
#reagent
-
BF4000 SMOChem™ 1X Tris-Glycine-SDS Running Buffer Powde, 5 pouches/pack (For 5000 ml)
1X Tris-Glycine-SDS Running Buffer Powder is used for electrophoresis on Q-PAGE™ Tris-Glycine Precast Gel or Laemmli Tris-HCl gels in Tris-Glycine buffer system. It is convenient and universal for electrophoresis in Tris-Glycine buffer system.
-
BF2000 SMOChem™ 1X MOPS-SDS Running Buffer Powder, 5 pouches/pack (For 5000 ml)
1X MOPS-SDS Running Buffer Powder is used for electrophoresis on Q-PAGE™ Bis-Tris Precast Gel or polyacrylamide gels in Bis-Tris buffer system. It is convenient and universal for electrophoresis in Bis-Tris buffer system.
-
Q-PAGE™ TGN Precast Gel, Midi (10 x 10 cm), suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP5210: Midi, 12 wells, 10%
- QP5220: Midi, 15 wells, 10%
- QP5510: Midi, 12 wells, 4-15%
- QP5520: Midi, 15 wells, 4-15%
-
Q-PAGE™ TGN Precast Gel, Mini (10 x 8.3 cm), suitable for Bio-Rad® system
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP4210: Mini, 12 wells, 10%
- QP4220: Mini, 15 wells, 10%
- QP4510: Mini, 12 wells, 4-15%
- QP4520: Mini, 15 wells, 4-15%
-
Q-PAGE™ Bis-Tris Precast Gel, Midi (10 x 10 cm), suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP3110: Midi, 12 wells, 8%
- QP3120: Midi, 15 wells, 8%
- QP3310: Midi, 12 wells, 12%
- QP3320: Midi, 15 wells, 12%
- QP3510: Midi, 12 wells, 4-12%
- QP3520: Midi, 15 wells, 4-12%
-
Q-PAGE™ Bis-Tris Precast Gel, Mini (10 x 8.3 cm), suitable for Bio-Rad® system
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP2110: Mini, 12 wells, 8%
- QP2120: Mini, 15 wells, 8%
- QP2310: Mini, 12 wells, 12%
- QP2320: Mini, 15 wells, 12%
- QP2510: Mini, 12 wells, 4-12%
- QP2520: Mini, 15 wells, 4-12%