-
Longer Pump BT300-2J [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Medium Flow Rate Peristaltic Pump BT300-2J could be loaded with YZ1515X, YZ2515X, YZII15, YZII25 and DG15-24. The pump provides flow rates from 0.07mL/min to 1140 mL/min. The speed could be controlled through control panel, external control interface or RS485 interface. The running parameters are saved automatically. And the pump could be operated easily. -
C3490-1000, Anti-mycoplasma, fungal, virus and bacterial spray (1L)
Pharmacidal, for disinfecting surfaces. Pkg size: 1 litre/bottle
-
4301PC Basicpipette Aids
4301PC Basicpipette aids
• Continuous speed control wheel
• Blow-out and gravity dispense selection
• Dangerous fume or liquid protective hole
• Single-handed Operation, Self-inverted on the bench
• UV-resistant housing, Complies with CE and RoHS
• Light-weighted; 167g, including a lithium battery
• Battery Lidicator
• Helix Switch Close-knit
• Other bands to serve as reference points.
#pipette gun #pipette controller
-
6038 2.2ml Deep well plate
6038 2.2ml Deep well plate 1/bag, Nature ,Sterile, 50/case
- In addition to storage and screening applications, the 2.2ml Storage Plate is also
- Recommended for the growth of bacterial cultures.
- 96 square wells and 2.2ml volume.
- SBS standard footprint
- U-shaped well bottom to aid resuspension
- Material : Polypropylene
-
39400-2E Cryovial, Internal thread with Silicone washer seal, 2.0mL, Self-standing
*Special price valid while stock last.
1. Made from special polypropylene for storing biological material or cells at temperatures as low as -196°.(only in the gas phase of liquid nitrogen)
2. Packing: 100/bag, 10 bags/case
-
Culture Tubes, Round Bottom,with Dual-position Cap,Graduated
Disposable Culture Tubes, Round Bottom, Rimed,with Dual-position Cap,with Graduation
1. Made of ultra clear virgin polypropylene or virgin polystyrene
2. Polystyrene tubes are transparent. Polypropylene tubes are opaque, break-resistant.
3. 12x75mm Polystyrene tubes can withstand centrifugation up to 1400xg and temperature at 80°C; Polypropylene tubes can be 3000xg and 120°C
4. 17x100mm Polystyrene tubes can withstand centrifugation up to 3000xg and temperature at 80°C; Polypropylene tubes can be 5500xg and 120°C
*Available with Printed Graduations and large white marking area for easy labelling.
Dual-position cap:
-Vented for aerobic cultures work
-Sealed for anaerobic cultures work
OPTIONS:
•82142: 12x75mm, 4mL, PS, 25/peel bag, 40 bags/case
•82442: 17x100mm, 12mL, PP, 25/peel bag, 40 bags/case -
Ice Bucket and Ice Pan
Specifications
• Solid, molded in one piece, expanded polyvinyl chloride(PVC)
• Resistant to temperatures from -321°F(-196°C) to 200°F(93°C)
• Impervious to moisture or odors
• Superior insulation
• Lightweight
• Portable
• Unbreakable
• Long-Lasting -
C3310-0500, TransfMEM
TransfMEM-α Reduced Serum Medium. Pkg size: 500 ml/bottle
-
C3481-0050, Aquaguard 2
Aquaguard-2 (Ordinary Water Baths)-Former: BI: 01-916-1E
-
Conical-bottom centrifuge tube
*Special price valid while stock last.
Conical-bottom Centrifuge tubes,Polypropylene
1. These conical-bottom tubes are made of ultra-clear polypropylene
2. Cap Materials: HDPE
3. Leakproof (-95kPa, 14 psi)
4. White printed graduations with large marking strip for labeling
5. DNa/RNa free, Non-pyrogenic
Volume:
- 34117F: 15ml 50tubes/pack, 10 packs/case
- 32104F: 50mL, 25tubes/pack, 20 packs/case
-
Cryovial Storage Boxes for 1ml And 2ml Tubes, Polycarbonate
91300pk Cryovial storage box, PC, 100-well, Green color (10 racks)
Cryovial Storage Boxes for 1ml and 2ml Tubes, Polycarbonate
1. Manufactured in Polycarbonate provide ultra low temperature storage from -196℃ to 121℃
2. Fitting for storage of Cryovials from 1.0ml to 2.0ml in Liquid Nitrogen or Freezer
3. Alphanumeric grid on lid for easy identification of samples
4. With Air vents for storage of freezing
5. Covers are keyed to the base to prevent misalignment, with transparent cover and moverable grid.
6. Measurement: 10×10 Array box, measurement: 130 x 130 x 53mm(LxWxH,mm) -
C3480-0100, Aquaguard 1
Aquaguard-1 (Water-Baths in CO2 Incubators)-Former: BI: 01-867-1B
-
7111pk 8 Strips Low Profile PCR Tubes + Optically Clean Caps
7111pk 8 Strips LP PCR tubes + Optically clean caps
• 0.1mL
• Optimal and consistent heat transfer
• Low binding interior surface, ensuring maximum yield
• Low-profile design reduces dead space between cycler heated lid and sample, eliminating condensation on tube side, preventing reduction in PCR volume, and increasing reaction efficiency
• Can be cut into sections
• Packing: 120/box -
7103pk 8 Strips PCR tubes with flat caps
7103pk 8 Strips PCR tubes with flat caps Nature
• Suitable for all 0.2ml block thermal cyclers
• 0.25ml maximum recommended capacity
• Individually numbered tubes
• Can be cut into sections
• Large end tabs for easy removal
• Labelled for orientation
• Packing: 120/box -
7102pk QPCR 8-strip Tube & Caps
7102pk 8 Strips PCR tubes with Real time caps, Nature Colour
Each Ultra Clear Cap has a highly polished flat surface, providing an optically clear window. The caps are mounded from a specially formulated polypropylene that enhances signal detection by minimizing autofluorescence and maximizing transmission.
• Specially formulated ultra clear
• Polypropylene
• Highly polished
• Flat cap design
• Packing: 120/box -
2707Bpk 81 well Box PP for 1.5/2.0ml tubes
2707Bpk 81 well Box PP for 1.5/2.0ml tubes, Blue (10/pack)
- Freezer racks with separate lids are for all major brands of screw cap micro centrifuge tubes.
- The box holds up to 81 tubes and has an alpha numeric labeling area. Freezes to -90C.
- Have every kind of color, the convenient laboratory.
- classification management
- Material : Polypropylene
-
0296Bpk 96 well rack
0296Bpk 96 well rack PP for 0.2ml PCR tubes, Blue
• Freezer racks with separate lids are for all major brands of screw cap micro centrifuge tubes.
• The box holds up to 0.2ml / 96 tubes.
• Has an alpha numeric labeling area.
• Freezes to -90C.
• Material : Polypropylene
• Packing: 10 units/pack -
C3490-0100, Anti-mycoplasma, fungal, virus and bacterial spray (100ml)
Pharmacidal, for disinfecting surfaces. Pkg size: 100 ml/bottle
-
6264pk 81 well Cyro Box
6264pk 81 well Cyro Box for 1.5/2.0ml tubes (12 boxes/pack)
Features:•Cardboard material with water-repellent coating for moisture resistance.
•Capacity for 81 sample tubes (9×9 places for 1.5-2ml microcentrifuge and cryovials)
•Easy to write surface
•Dimension: D13.2×W13.2×H5.3cm
•Comes with grid inserts and dividers for sample tubes
•Markings on both the interior and exterior surfaces -
C3730-0100, Trypan Blue
Trypan Blue Solution, 5mg/ml in Saline
-
7001pk PCR Tubes
7001pk 0.2 ml PCR tubes with flat caps, Nature (1000/box)
-
Multi Mixture Rack for 0.5ml/1.5ml/50ml Tubes
Specifications
• PP test tube rack can be used for multipurpose in four face different test tubes diameter.
• Polypropylene racks and boxes suitable for use with 0.5ml, 1.5ml, 1.7ml, 2.0ml, 15ml, 50ml tubes
• Packing: 5/pack -
C3530-0100, Trypsin-EDTA solution A
Trypsin EDTA Solution A (0.25%), EDTA (0.02%), with Phenol Red
-
C3560-0500, Water, Cell Culture
Water, Cell Culture Grade
-
C3590-0500, dPBS, without Ca and Mg
Vivacell dPBS, without Ca and Mg, 500 ml/bottle <Amb Storage>
-
6402pc 81 well Cryobox for LN2 Storage
6402pc 81 well Cryobox for LN2 Storage
• For storage to -190°C
• Holds up to 81 tubes
• Dimension: 5¼˝L x 5¼˝W x 21⁄16˝H, fits all standard storage units.
• Clear lid
• Stackable and autoclavable
• Made of polycarbonate -
91696Opk Reversible Racks for Microtube, Polypropylene 96-well
91696Opk Reversible microtube rack, 1.5/2.0ml + 0.5/0.7ml, 96-well , orange (1/bag)
Reversible Racks for Microtube,Polypropylene and 96-well
1. Manufactured in Heavy-duty Polypropylene.
2. One side is designed to hold 1.5ml/2.0ml tubes,the other side holds 0.5ml/0.7ml tubes.
3. Racks are molded numbered on the surface for easy samples identification.
4. Idea for Freezing.Temperature range-80℃ to 121℃.Suitable for autoclaving at 121℃.