-
Conical-bottom centrifuge tube
*Special price valid while stock last.
Conical-bottom Centrifuge tubes,Polypropylene
1. These conical-bottom tubes are made of ultra-clear polypropylene
2. Cap Materials: HDPE
3. Leakproof (-95kPa, 14 psi)
4. White printed graduations with large marking strip for labeling
5. DNa/RNa free, Non-pyrogenic
Volume:
- 34117F: 15ml 50tubes/pack, 10 packs/case
- 32104F: 50mL, 25tubes/pack, 20 packs/case
-
4301PC Basicpipette Aids
4301PC Basicpipette aids
• Continuous speed control wheel
• Blow-out and gravity dispense selection
• Dangerous fume or liquid protective hole
• Single-handed Operation, Self-inverted on the bench
• UV-resistant housing, Complies with CE and RoHS
• Light-weighted; 167g, including a lithium battery
• Battery Lidicator
• Helix Switch Close-knit
• Other bands to serve as reference points.
#pipette gun #pipette controller
-
7001pk PCR Tubes
7001pk 0.2 ml PCR tubes with flat caps, Nature (1000/box)
-
7102pk QPCR 8-strip Tube & Caps
7102pk 8 Strips PCR tubes with Real time caps, Nature Colour
Each Ultra Clear Cap has a highly polished flat surface, providing an optically clear window. The caps are mounded from a specially formulated polypropylene that enhances signal detection by minimizing autofluorescence and maximizing transmission.
• Specially formulated ultra clear
• Polypropylene
• Highly polished
• Flat cap design
• Packing: 120/box -
0296Bpk 96 well rack
0296Bpk 96 well rack PP for 0.2ml PCR tubes, Blue
• Freezer racks with separate lids are for all major brands of screw cap micro centrifuge tubes.
• The box holds up to 0.2ml / 96 tubes.
• Has an alpha numeric labeling area.
• Freezes to -90C.
• Material : Polypropylene
• Packing: 10 units/pack -
91696Opk Reversible Racks for Microtube, Polypropylene 96-well
91696Opk Reversible microtube rack, 1.5/2.0ml + 0.5/0.7ml, 96-well , orange (1/bag)
Reversible Racks for Microtube,Polypropylene and 96-well
1. Manufactured in Heavy-duty Polypropylene.
2. One side is designed to hold 1.5ml/2.0ml tubes,the other side holds 0.5ml/0.7ml tubes.
3. Racks are molded numbered on the surface for easy samples identification.
4. Idea for Freezing.Temperature range-80℃ to 121℃.Suitable for autoclaving at 121℃. -
Cryovial Storage Boxes for 1ml And 2ml Tubes, Polycarbonate
91300pk Cryovial storage box, PC, 100-well, Green color (10 racks)
Cryovial Storage Boxes for 1ml and 2ml Tubes, Polycarbonate
1. Manufactured in Polycarbonate provide ultra low temperature storage from -196℃ to 121℃
2. Fitting for storage of Cryovials from 1.0ml to 2.0ml in Liquid Nitrogen or Freezer
3. Alphanumeric grid on lid for easy identification of samples
4. With Air vents for storage of freezing
5. Covers are keyed to the base to prevent misalignment, with transparent cover and moverable grid.
6. Measurement: 10×10 Array box, measurement: 130 x 130 x 53mm(LxWxH,mm) -
Ice Bucket and Ice Pan
Specifications
• Solid, molded in one piece, expanded polyvinyl chloride(PVC)
• Resistant to temperatures from -321°F(-196°C) to 200°F(93°C)
• Impervious to moisture or odors
• Superior insulation
• Lightweight
• Portable
• Unbreakable
• Long-Lasting -
6264pk 81 well Cyro Box
6264pk 81 well Cyro Box for 1.5/2.0ml tubes (12 boxes/pack)
Features:•Cardboard material with water-repellent coating for moisture resistance.
•Capacity for 81 sample tubes (9×9 places for 1.5-2ml microcentrifuge and cryovials)
•Easy to write surface
•Dimension: D13.2×W13.2×H5.3cm
•Comes with grid inserts and dividers for sample tubes
•Markings on both the interior and exterior surfaces -
39400-2E Cryovial, Internal thread with Silicone washer seal, 2.0mL, Self-standing
*Special price valid while stock last.
1. Made from special polypropylene for storing biological material or cells at temperatures as low as -196°.(only in the gas phase of liquid nitrogen)
2. Packing: 100/bag, 10 bags/case
-
Culture Tubes, Round Bottom,with Dual-position Cap,Graduated
Disposable Culture Tubes, Round Bottom, Rimed,with Dual-position Cap,with Graduation
1. Made of ultra clear virgin polypropylene or virgin polystyrene
2. Polystyrene tubes are transparent. Polypropylene tubes are opaque, break-resistant.
3. 12x75mm Polystyrene tubes can withstand centrifugation up to 1400xg and temperature at 80°C; Polypropylene tubes can be 3000xg and 120°C
4. 17x100mm Polystyrene tubes can withstand centrifugation up to 3000xg and temperature at 80°C; Polypropylene tubes can be 5500xg and 120°C
*Available with Printed Graduations and large white marking area for easy labelling.
Dual-position cap:
-Vented for aerobic cultures work
-Sealed for anaerobic cultures work
OPTIONS:
•82142: 12x75mm, 4mL, PS, 25/peel bag, 40 bags/case
•82442: 17x100mm, 12mL, PP, 25/peel bag, 40 bags/case -
BF4000 SMOChem™ 1X Tris-Glycine-SDS Running Buffer Powde, 5 pouches/pack (For 5000 ml)
1X Tris-Glycine-SDS Running Buffer Powder is used for electrophoresis on Q-PAGE™ Tris-Glycine Precast Gel or Laemmli Tris-HCl gels in Tris-Glycine buffer system. It is convenient and universal for electrophoresis in Tris-Glycine buffer system.
-
6038 2.2ml Deep well plate
6038 2.2ml Deep well plate 1/bag, Nature ,Sterile, 50/case
- In addition to storage and screening applications, the 2.2ml Storage Plate is also
- Recommended for the growth of bacterial cultures.
- 96 square wells and 2.2ml volume.
- SBS standard footprint
- U-shaped well bottom to aid resuspension
- Material : Polypropylene
-
Multi Mixture Rack for 0.5ml/1.5ml/50ml Tubes
Specifications
• PP test tube rack can be used for multipurpose in four face different test tubes diameter.
• Polypropylene racks and boxes suitable for use with 0.5ml, 1.5ml, 1.7ml, 2.0ml, 15ml, 50ml tubes
• Packing: 5/pack -
BF2000 SMOChem™ 1X MOPS-SDS Running Buffer Powder, 5 pouches/pack (For 5000 ml)
1X MOPS-SDS Running Buffer Powder is used for electrophoresis on Q-PAGE™ Bis-Tris Precast Gel or polyacrylamide gels in Bis-Tris buffer system. It is convenient and universal for electrophoresis in Bis-Tris buffer system.
-
Q-PAGE™ TGN Precast Gel, Midi (10 x 10 cm), suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP5210: Midi, 12 wells, 10%
- QP5220: Midi, 15 wells, 10%
- QP5510: Midi, 12 wells, 4-15%
- QP5520: Midi, 15 wells, 4-15%
-
Q-PAGE™ TGN Precast Gel, Mini (10 x 8.3 cm), suitable for Bio-Rad® system
Q-PAGE™ TGN (Tris-Glycine Novel) Precast Gels are ready-to-use acrylamide gels for SDS-PAGE running in Tris-Glycine buffer system. With unique formula, Q-PAGE™ TGN Precast Gels perform enhanced speed, better separation, and longer shelf life as compared with conventional Laemmli Tris-HCl gels. The protein migration patterns in Q-PAGE™ TGN series, however, are similar with typical Laemmli Tris-HCl gels, and thus Q-PAGE™ TGN Precast Gels are compatible to traditional SDS-PAGE and subsequent analyses.
Q-PAGE™ TGN Precast Gels are available in gradient (4 to 15%) and fixed (10%) concentrations of polyacrylamide in 12- and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP4XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP5XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP4210: Mini, 12 wells, 10%
- QP4220: Mini, 15 wells, 10%
- QP4510: Mini, 12 wells, 4-15%
- QP4520: Mini, 15 wells, 4-15%
-
Q-PAGE™ Bis-Tris Precast Gel, Midi (10 x 10 cm), suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP3110: Midi, 12 wells, 8%
- QP3120: Midi, 15 wells, 8%
- QP3310: Midi, 12 wells, 12%
- QP3320: Midi, 15 wells, 12%
- QP3510: Midi, 12 wells, 4-12%
- QP3520: Midi, 15 wells, 4-12%
-
Q-PAGE™ Bis-Tris Precast Gel, Mini (10 x 8.3 cm), suitable for Bio-Rad® system
Q-PAGE™ Bis-Tris Precast Gel is a high-performance and easy to use precast polyacrylamide gel for electrophoresis in Bis-Tris buffer system (MOPS or MES). The optimized gel formula allows Q-PAGE™ Bis-Tris Precast Gel to show improved resolution, accurate results, and an extended shelf-life over conventional Laemmli Tris-HCl gels.
Q-PAGE™ Bis-Tris Precast Gels are available in gradient (4 to 12%) and fixed (8% and 12%) concentrations of polyacrylamide in 12-and 15-well formats. Two available cassette sizes, Mini (10 x 8.3 cm) and Midi (10 x 10 cm), are compatible with most popular protein electrophoresis systems. Q-PAGE™ Mini (QP2XXX) Gels are suitable for Bio-Rad® and other systems. Q-PAGE™ Midi (QP3XXX) Gels are suitable for Invitrogen® XCell SureLock® Mini-Cell, Invitrogen® Mini Gel Tank, Hoefer SE260, and other systems.
OPTIONS:
- QP2110: Mini, 12 wells, 8%
- QP2120: Mini, 15 wells, 8%
- QP2310: Mini, 12 wells, 12%
- QP2320: Mini, 15 wells, 12%
- QP2510: Mini, 12 wells, 4-12%
- QP2520: Mini, 15 wells, 4-12%
-
2707Bpk 81 well Box PP for 1.5/2.0ml tubes
2707Bpk 81 well Box PP for 1.5/2.0ml tubes, Blue (10/pack)
- Freezer racks with separate lids are for all major brands of screw cap micro centrifuge tubes.
- The box holds up to 81 tubes and has an alpha numeric labeling area. Freezes to -90C.
- Have every kind of color, the convenient laboratory.
- classification management
- Material : Polypropylene
-
7111pk 8 Strips Low Profile PCR Tubes + Optically Clean Caps
7111pk 8 Strips LP PCR tubes + Optically clean caps
• 0.1mL
• Optimal and consistent heat transfer
• Low binding interior surface, ensuring maximum yield
• Low-profile design reduces dead space between cycler heated lid and sample, eliminating condensation on tube side, preventing reduction in PCR volume, and increasing reaction efficiency
• Can be cut into sections
• Packing: 120/box -
7103pk 8 Strips PCR tubes with flat caps
7103pk 8 Strips PCR tubes with flat caps Nature
• Suitable for all 0.2ml block thermal cyclers
• 0.25ml maximum recommended capacity
• Individually numbered tubes
• Can be cut into sections
• Large end tabs for easy removal
• Labelled for orientation
• Packing: 120/box -
6402pc 81 well Cryobox for LN2 Storage
6402pc 81 well Cryobox for LN2 Storage
• For storage to -190°C
• Holds up to 81 tubes
• Dimension: 5¼˝L x 5¼˝W x 21⁄16˝H, fits all standard storage units.
• Clear lid
• Stackable and autoclavable
• Made of polycarbonate