-
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile. -
TOC-1500 Total Organic Carbon Analyzer
1. Equipped with conductivity detector to quantify TOC concentration.
2. In compliance with FDA-21 CFR Part11 requirements and USP, EP, JP and ChP.
3. Quick test, each analysis takes less than 3 minutes.
4. All historical records can be traced by searching test date.
5. Modular design for quick installation and easy maintenance. -
CLC-3200 HPLC
1. With multi solvent management system, each flow path is equipped with two mobile phases, and the mobile phase can be switched with one key as required.
2. Equipped with autosampler, it can get rid of the trouble of manual injection, inject samples continuously for 24 hours, and complete the test data faster.
3. Wide area temperature control column oven, stable temperature control up to 65 ℃, with good data reproducibility. -
CIC-D150 Ion Chromatograph
1. Auto-range conductivity detector to realize the imultaneous determination of 5ppb-100ppm concentration sample without setting the range.
2. A micro gas-liquid separator is set to remove the bubble from the eluent.
3. Set “intelligent maintenance”, the instrument can complete the flow path switch to the pure water path.
4. The mobile APP can remotely control the instrument on /off and observe the operation performance parameters of the instrument. -
UV-9000 Double Beam UV/VIS Spectrophotometer
Dual Beam Light Path Design
Powerful Stand-alone Operation System
Long Light Path Design
UV Analyst PC Software
16mm Rigid Aluminum Optical Base
One-button Automatic Calibration System
6 inches Large LCD display
Easy Data Output and Printing -
V-5000 Visible Spectrophotometer
1. Latest Microprocessor Controlling System
2. Precision 1200 lines/mm Grating Monochromator
3. Easy Data Output by USB/Parallel Port
4. Elegant Streamlined Design, Multi-function Operation System
5. Four Display Modes, One-Button Quick Switching -
ECO-S15 Ultrapure Water Machine
1. LCD (resolution: 128×64, dimension: 66×33mm) controlling system, intuitively display the system running state and various parameters.
2. 2 way online water quality sensor, detect the quality of RO water and ultrapure water respectively. And warn once water quality’s standard exceeding.
3. Cartridges replacing alarm function, based on time and water quality, show cartridges’ used and residual life.
4. Multiple alarm function: no feed water, full water, water quality’s standard exceeding, and cartridge life ending.
5. Auto self-flushing of RO membrane function, extend RO membrane’s life.
6. Level II password, protect all the parameters setting, and prohibit any unauthorized setting change.
7. Water dispensing function- timing and quality (time range: 1-99min, water quality range: 0.1-18.2MΩ.cm). -
DT35C Low Speed Table Centrifuge
1. HD large LCD display and the parameters can be revised during operation without shutdown.
2. Program group shortcut key, large storage space, can store 99 program.
3. Microcomputer control ,AC frequency conversion brush-less motor with fast speed and stable operation.
4. Steel Structure,centrifuge chamber made of stainless steel with Environmentally friendly anti-corrosion coating treatment.