-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
GELMAN BH 48BE BioEssential Class II Type A2 BSC (4FT) with stand [Resale]
*Additional charge for installation and NSF49 recertification
*One Science does not handle the warranty for resale items
KEY FEATURES
•superior ergonomic design & styling
•negative pressure double-wall housings for containment
•all stainless steel work zone construction with radiused & crevice-free corners
•spacious work zone interior
•smooth & effortless sliding tempered glass window, closes completely
•microprocessor-controlled diagnostic system with digital display & audible alarm
•hourmeter
•delayed-automatic-off timer
•elapsed / event timer
•ISO Class 5 (Class 100) air cleanliness work zone for absolute product protection
•ZERO-LEAK airflow system for enhanced safety
•reliability-proven design & performance
•Cabinet Overall Dimensions (excluding stand), W x D x H (mm): 1351 x 788 x 1498
•Cabinet Work Zone Dimensions, W x D x H (mm): 1188 x 630 x 684 -
Fully Autoclavable Mechanical Pipette
Single-channel Adjustable Volume
• Ergonomic Design
• Ultralight Weight
• Calibrated with accordance to ISO8655-2
Volume:
• 7030511001 Hipette: 0.1-2.5ul
• 7030511004 Hipette: 0.5-10ul
• 7030511005 Hipette: 2-20ul
• 7030511006 Hipette: 5-50ul
• 7030511008 Hipette: 10-100ul
• 7030511009 Hipette: 20-200ul
• 7030511040 Hipette: 30-300ul
• 7030511014 Hipette: 100-1000ul
• 7030511043 Hipette: 1000-5000ul
• 7030511033 Hipette: 2-10ml -
W3102A-220-E Analytical Balance, series Tx, internal calibration, Touch Screen, 220×0.0001g
Analytical Balance, series Tx, internal calibration, Touch Screen, 220×0.0001g
-
W3101A-220-E Accuris Analytical Balance, series Dx, internal calibration, Graphical Display, 220gx0.0001g
Accuris Analytical Balance, series Dx, internal calibration, Graphical Display, 220gx0.0001g
-
V0020-E Aspire, Laboratory Aspirator with single channel flow controller, 230V
Aspire, Laboratory Aspirator with single channel flow controller, 230V
OPTIONAL ACCESSORIES:
-
NS1020-E SmartDrop™ XF Nano Spectrophotometer, 230V
SmartDrop™ XF Nano Spectrophotometer, 230V
-
NS1010-E SmartDrop™ X Nano Spectrophotometer, 230V
SmartDrop™ X Nano Spectrophotometer, 230V
-
NS1000-E SmartDrop™ L Nano Spectrophotometer, 230V
SmartDrop™ L Nano Spectrophotometer, 230V
-
MW9600-E SmartWasher™ 96 Microplate Washer for 96 Well Plates, manifolds not included, 230V
SmartWasher™ 96 Microplate Washer for 96 Well Plates, manifolds not included, 230V
-
MS1000-E SmartSeal™ Semi-Automated Microplate Sealer, 230V
SmartSeal™ Semi-Automated Microplate Sealer, 230V
-
MR9611-E SmartReader™ UV-Vis Microplate Absorbance Reader with Cuvette Port, 230V
SmartReader™ UV-Vis Microplate Absorbance Reader with Cuvette Port, 230V
-
MR9610-E SmartReader™ UV-Vis Microplate Absorbance Reader, 230V
SmartReader™ UV-Vis Microplate Absorbance Reader, 230V
-
MR9600-T-E SmartReader™ 96 Microplate Absorbance Reader with Incubation, 230V
Accuris SmartReader 96 Microplate 96 absorbance reader with incubation, 230V
-
MR9600-E Accuris Absorbance Microplate Reader, for 96 Well Plates, 230v
Accuris SmartReader 96 Microplate 96 absorbance reader 230V
-
E7500-E QuadCount Automated Cell Counter, 230V
QuadCount Automated Cell Counter, 230V
-
E5001-SDB-E Accuris SmartDoc 2.0 System with Blue Light Illumination Base, 230V
Accuris SmartDoc 2.0 System with Blue Light Illumination Base, 230V
-
E4000-E* SmartBlue™ Transilluminator, 230V input
SmartBlue™ Transilluminator, 230V input
-
E3100-E Accuris myView™ Compact UV Transilluminator, 230V
Accuris myView™ Compact UV Transilluminator, 230V
-
E3000-E Accuris UV Transilluminator, 230V
Accuris UV Transilluminator, 230V
-
E2302-2000-E Accuris PowerVolt High Current, 300V/2000mA Power Supply, 230V
Accuris PowerVolt High Current, 300V/2000mA Power Supply, 230V
-
E2502-400-E Accuris PowerVolt 500V/400mA Power Supply, 230V
Accuris PowerVolt 500V/400mA Power Supply, 230V
-
E2301-E myVolt™ Touch power supply, 230V
myVolt™ Touch power supply, 230V
-
E2100-E myVolt™ Mini power supply, 230V
myVolt™ Mini power supply, 230V
-
E1201-E myGel InstaView™ Complete Electrophoresis System with Blue LED Illuminator, 230V input
myGel InstaView™ Complete Electrophoresis System with Blue LED Illuminator, 230V input
-
E1200-E myGel InstaView™ Gel Tank with Blue LED Illuminator, 230V input
myGel InstaView™ Gel Tank with Blue LED Illuminator, 230V input
-
E1101-SK-E myGel Mini Electrophoresis System Starter Kit (Includes E1101-E, A1701 and W4000-100)
myGel Mini Electrophoresis System Starter Kit (Includes E1101-E, A1701 and W4000-100)
-
E1101-E myGel Mini Electrophoresis System 230V (includes transformer)
myGel Mini Electrophoresis System 230V (includes transformer)
-
AP1016-E IsoPure™ Mini, Automated Purification System, 230V
IsoPure™ Mini, Automated Purification System, 230V
-
AP1096-E IsoPure™ 96, Automated Purification System, 230V
IsoPure™ 96, Automated Purification System, 230V
-
5140-000PC Micro Pellet Pestle Rods with Motor
5140-000PC Micro Pellet Pestle Rods with Motor, 1/box
Use together with 5141-000pk Pestle for 1.5ml tubes PP, 100/bag.
- Hand-operated or motor-driven grinders for resuspending pellets or disrupting soft tissue in microcentrifuge tubes.
- Its high-speed vortexing action completely homogenizes cell tissue and pellets within seconds.
- Designed to homogenize cells and plant tissue or to re-suspend protein and DNA pellets.
- Pestle ends are specially designed to mate with 0.5 mL or 1.5 mL microcentrifuge tubes.
- Shaft is convenient length and diameter for gentle manual back-and-forth rotation or more vigorous motorized operation.
- Optional battery-powered motor (with two AA batteries) can be used with pestles and microcentrifuge tubes.
- Motor is lightweight and greatly reduces hand fatigue.