-
Memmert Germany-Universal Oven UF110PLUS [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The universally applicable lab oven U is Memmert’s classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology. -
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
AU680 Clinical Chemistry Analyzer [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The AU680 clinical chemistry analyzer gives mid- to high-volume laboratories the flexibility to improve efficiencies and economics their way. Operate the AU680 as a standalone system or connect it to laboratory automation and IT solutions. With throughput of up to 800 photometric tests per hour (up to 1,200 with ISEs) and 63 onboard parameters, the AU680 clinical chemistry analyzer delivers field-proven reliability and efficiency to laboratories around the world.
System includes:
- Analyzer
- Sampler
- Computer rack
-
Memmert ICH260C Climate Chamber [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
Setting temperature range: -10 to +60 °C
Working temperature range: from -10°C up to +60°C without humidity (not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over)
Working temperature range: from +10°C up to +60°C with humidity and/or light
Setting accuracy temperature: 0.1 °C
Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Works calibration certificate: standard values +10 °C and +37 °C, 60 % rh at +30 °C
Door: inner glass doors
Door: fully insulated stainless steel doors with 2-point locking (compression door lock)
Entry port: Entry port (silicone), 40 mm clear diameter, moisture tight, can be closed by a silicone stopper, standard position at the back
Humidity: humidity supply with distilled water from external tank by self-priming pump
Humidification: humidification by hot steam generator
Humidity: active humidifying and de-humidifying adjustable from 10-80 % rh with digital display of relative humidity – resolution of display 0.1 %, setting accuracy 0.5 %
Fan: forced air circulation
External Dimensions: w(D) x h(E) x d(F): 824 x 1552 x 685 mm (d +56mm door handle)
Internal Dimensions: w(A) x h(B) x d(C): 640 x 800 x 500 mm (d less 33 mm for fan)
Volume: 256 l
Max. number of internals: 9
Max. loading of chamber: 200 kg
Max. loading per internal: 20 kg -
Martindale Abrasion Tester
To determine the abrasion resistance of all kinds of footwear vamp material. Samples are rubbed against known abradant at low pressures and in continuously changing directions and the amount of abrasion. The unique design allows removal of individual sample holders for examination without lifting the top motion plate.
MODEL:
• GT-KC13B-4, Work Position 4
• GT-KC13B-6, Work Position 6 -
Automatic Air Permeability Tester
To test the air permeability of various woven fabrics, knitted fabrics, non-woven fabrics, industrial filter materials etc.
MODEL:
• GT-C27A: PLC+Touch Screen
• GT-C27B: PLC+Touch Screen+PC Control -
Martindale Abrasion and Pilling Tester
To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradents at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
MODEL:
• GT-C13B-4 (Working Position: 4)
• GT-C13B-6 (Working Position: 6) -
Crockmeter
To determine the colour fastness of textiles to dry or wet rubbing. A pinned acrylic sample holder ensures rapid sample mounting and repeatability of results
MODEL:
• Electronic Crockmeter (GT-D04)
• Manual Crockmeter (GT-D05) -
Hydraulic Bursting Strength Tester
It is applied to determine the bursting strength and distension at burst of woven, knitted and non woven fabrics, papers and boards by the application of hydraulic load under a rubber diaphragm
MODEL:
• GT-C12A-1 (2Mpa)
• GT-C12A-2 (10Mpa) -
High pressure-servo Hydrostatic Head Tester (GT-C26B-1)
Hydrostatic Tester is used to test the waterproof properties of fabric through waterproofing work such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile
MODEL:
• Testing Range: 200kpa
• Testing Range: 500kpa -
ICI Pilling and Snagging Tester
ICI Pilling and Snagging Tester, to determine the surface pilling and snagging properties of both woven and knitted materials. It complies in full with the requirements of EN ISO 12945-1 and BS 5811, etc.
MODEL:
• GT-C18A (2 Boxes), Working Position: 2
• GT-C18B (4 Boxes), Working Position: 4 -
Universal Tensile Strength Tester
It is designed for conducting tensile, compression, bending, shearing, bonding strength, peeling, tearing and other tests for shoes, rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials and other materials.
MODEL:
• GT-UA03 (Single Column)
Max Capacity (2.5KN)
-Computer display
-Standard Accessory with Manual Grips
• GT-C01-1A (Double Column)
Max Capacity (5KN)
-Computer display
-Standard Accessory With computer Pneumatic clamps
• GT-UA01 (Double Column)
Max Capacity (5KN/10KN)
-Computer display
-Standard Accessory with Manual Grips -
Pneumatic Sample Press (GT-C48)
Sample pneumatic compression machine, a new type of desktop compression machine, equipped with 125 mm gas cylinder, Cutting thickness of 10mm. Under the pressure of 100psi can produce 800kg pressure, equipped with a double bond security operation.
Can be requested to provide special shape die. Laboratory standards require the use of air compressor. -
Whole Shoes Flexing Tester (GT-KA01-2A)
It is to test finished shoes, like sports shoes, casual shoes, work shoes etc. And determine its flexing resistance or indicate the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
-
Bally Resistance Flexing Tester (GT-KC10A-12)
To determine the resistance of a material to cracking or other types of failure at flexing creases. The method is applicable to all flexible materials and in particular leathers, coated fabrics and textiles used in footwear uppers.
-
IULTCS & Veslic Leather Abrasion Tester (GT-KC01-1)
It is used for color fastness testing of leather, plastic and textile. Under the specified pressure, let white wool felt to do reciprocating abrasion to the surface of dye sample. After a specified count, to assess the color fastness of sample by checking the color change and fading of sample and the discoloration of white wool felt. It can be used for dry abrasion testing and wet abrasion test
-
DIN Abrasion Tester (GT-KB03B-1)
It is used to determine wear performance test of materials like elastic material, rubber, tires,
conveyor belts, conveyor belts, shoe soles. -
Perspiration Tester (GT-D09)
This machine apply for testing perspiration resistance color fastness of all kinds of textile
materials & dyeing, colorful textile and test for their perspiration resistance, waterproof,
seawater resistance, saliva resistance, chlorine bleach resistance, etamsylate
resistance and other performance. -
Snap Button Tester (GT-C09)
The aim of snap button test is defined responsibility of garment manufacturer, make sure button, push-button and fixed accessories can
fixed on garments suitable. To avoid button fall off garments & risk of infant eating. So, all the button, push-button & fixed accessories on
garments must pass snap button strength test. This machine can do even and vertical tensile test of all kinds of buttons on garments. Test
fastness degree of button reach relative security standard or not. -
Colour Fastness Tester to Washing (GT-D07) (6+6)
This machine apply to test dyeing textile color fastness changing degree after washing, it not only do washing color fastness and also dry washing color fastness test.
ISO Beaker: 550ml AATCC Beaker:1200ml -
Hydrostatic Head Tester (GT-C26A) 200kpa
Hydrostatic Tester is used to test the waterproof properties of fabrics through waterproofing work
such as canvas, coated fabrics, hood fabric, tarpaulin, rain-proof fabrics and geotextile.