-
Type 90 Minutes Safety Storage Cabinets FLAB9120
1. Doors lockable with cylinder lock
2. Integrated air ducts ready for connection (DN 75) to a technical exhaust system can be used for the extraction of hazardous substances vapours
3. Extremely robust design with scratch-proof surface
4. Door lockable with cylinder lock, the cabinets can be integrated by the customer into an existing locking system
5. Doors stay in place at any opening angle for a more convenient handling of containers
6. Integrated transport base for simple inhouse transport, cabinet can be transported upright through doors -
Safety Showers and Eyewash SS3011
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Emergency Showers and Eyewash with Epoxy SS3001Y
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
Safety Showers and Eyewash SS3001
In general, the ANSI standard provides that emergency equipment be installed within 10 seconds walking time from the location of the hazard. The equipment must be installed on the same level as the hazard (i.e. accessing the equipment should not require going up or down stairs or ramps). The path of travel from the hazard to the equipment should be free of obstructions and as straight as possible. Users of the equipment should not have to walk around machinery or other obstacles to reach the unit.
However, there are certain circumstances where these guidelines might not be adequate. For example, where workers are handling particularly strong acids, caustics or other materials where the consequences of a spill would be very serious, emergency equipment should be installed immediately adjacent to the hazard. Laboratory environments also require special consideration. -
AU680 Clinical Chemistry Analyzer [Resale]
*Additional charge for installation
*One Science does not handle the warranty for resale items
The AU680 clinical chemistry analyzer gives mid- to high-volume laboratories the flexibility to improve efficiencies and economics their way. Operate the AU680 as a standalone system or connect it to laboratory automation and IT solutions. With throughput of up to 800 photometric tests per hour (up to 1,200 with ISEs) and 63 onboard parameters, the AU680 clinical chemistry analyzer delivers field-proven reliability and efficiency to laboratories around the world.
System includes:
- Analyzer
- Sampler
- Computer rack
-
CryoKING CKS-5008 8-Channel Decapper (for external thread tube)
Features:
● Easy-to-use design: Caps or decaps 8 tubes in an individual line. One-hand operation
● Convenient operation: Improves processing throughput of manual procedures with automated column-wise decapping and capping in just 3 seconds
● Optimal torque level: Ensures reproducibility by capping decapping all tubes to the optimal torque level
● Ergonomic design: Light weight, easy-to-use and ergonomic design
● Extra-long standby time: Enhances the convenience of actual operation
● Low noise: Enables the capping /decapping noise less than 5 decibels -
W3102A-220-E Analytical Balance, series Tx, internal calibration, Touch Screen, 220×0.0001g
Analytical Balance, series Tx, internal calibration, Touch Screen, 220×0.0001g
-
W3101A-220-E Accuris Analytical Balance, series Dx, internal calibration, Graphical Display, 220gx0.0001g
Accuris Analytical Balance, series Dx, internal calibration, Graphical Display, 220gx0.0001g
-
V0020-E Aspire, Laboratory Aspirator with single channel flow controller, 230V
Aspire, Laboratory Aspirator with single channel flow controller, 230V
OPTIONAL ACCESSORIES:
-
NS1020-E SmartDrop™ XF Nano Spectrophotometer, 230V
SmartDrop™ XF Nano Spectrophotometer, 230V
-
NS1010-E SmartDrop™ X Nano Spectrophotometer, 230V
SmartDrop™ X Nano Spectrophotometer, 230V
-
NS1000-E SmartDrop™ L Nano Spectrophotometer, 230V
SmartDrop™ L Nano Spectrophotometer, 230V
-
MW9600-E SmartWasher™ 96 Microplate Washer for 96 Well Plates, manifolds not included, 230V
SmartWasher™ 96 Microplate Washer for 96 Well Plates, manifolds not included, 230V
-
MS1000-E SmartSeal™ Semi-Automated Microplate Sealer, 230V
SmartSeal™ Semi-Automated Microplate Sealer, 230V
-
MR9611-E SmartReader™ UV-Vis Microplate Absorbance Reader with Cuvette Port, 230V
SmartReader™ UV-Vis Microplate Absorbance Reader with Cuvette Port, 230V
-
MR9610-E SmartReader™ UV-Vis Microplate Absorbance Reader, 230V
SmartReader™ UV-Vis Microplate Absorbance Reader, 230V
-
MR9600-T-E SmartReader™ 96 Microplate Absorbance Reader with Incubation, 230V
Accuris SmartReader 96 Microplate 96 absorbance reader with incubation, 230V
-
MR9600-E Accuris Absorbance Microplate Reader, for 96 Well Plates, 230v
Accuris SmartReader 96 Microplate 96 absorbance reader 230V
-
E7500-E QuadCount Automated Cell Counter, 230V
QuadCount Automated Cell Counter, 230V
-
E5001-SDB-E Accuris SmartDoc 2.0 System with Blue Light Illumination Base, 230V
Accuris SmartDoc 2.0 System with Blue Light Illumination Base, 230V
-
E4000-E* SmartBlue™ Transilluminator, 230V input
SmartBlue™ Transilluminator, 230V input
-
E3100-E Accuris myView™ Compact UV Transilluminator, 230V
Accuris myView™ Compact UV Transilluminator, 230V
-
E3000-E Accuris UV Transilluminator, 230V
Accuris UV Transilluminator, 230V
-
E2302-2000-E Accuris PowerVolt High Current, 300V/2000mA Power Supply, 230V
Accuris PowerVolt High Current, 300V/2000mA Power Supply, 230V
-
E2502-400-E Accuris PowerVolt 500V/400mA Power Supply, 230V
Accuris PowerVolt 500V/400mA Power Supply, 230V
-
E2301-E myVolt™ Touch power supply, 230V
myVolt™ Touch power supply, 230V
-
E2100-E myVolt™ Mini power supply, 230V
myVolt™ Mini power supply, 230V
-
E1201-E myGel InstaView™ Complete Electrophoresis System with Blue LED Illuminator, 230V input
myGel InstaView™ Complete Electrophoresis System with Blue LED Illuminator, 230V input
-
E1200-E myGel InstaView™ Gel Tank with Blue LED Illuminator, 230V input
myGel InstaView™ Gel Tank with Blue LED Illuminator, 230V input
-
E1101-SK-E myGel Mini Electrophoresis System Starter Kit (Includes E1101-E, A1701 and W4000-100)
myGel Mini Electrophoresis System Starter Kit (Includes E1101-E, A1701 and W4000-100)
-
E1101-E myGel Mini Electrophoresis System 230V (includes transformer)
myGel Mini Electrophoresis System 230V (includes transformer)
-
AP1016-E IsoPure™ Mini, Automated Purification System, 230V
IsoPure™ Mini, Automated Purification System, 230V
-
AP1096-E IsoPure™ 96, Automated Purification System, 230V
IsoPure™ 96, Automated Purification System, 230V