-
S1005-E MiniMag™ Magnetic Stirrer
With a square footprint of under 5 inches, the MiniMag™ is the most compact stirrer in the Benchmark line. Despite its modest dimensions, the 3.4 inch square work surface accepts a wide variety of beakers, flasks, bottles and other laboratory vessels for stirring volumes as large as 1.5 liters.
The stirring speed is continuously adjustable from 100 to 1500rpm. For temperature sensitive samples, the MiniMag is incubator and cold-room safe for use from +4°C to +45°C. -
R1000 CoolCube™ Microtube and PCR Plate Cooler
The CoolCube™ is designed to store samples safely on the lab bench without sample degradation due to temperature increase or fluctuation. Simply place the CoolCube in the freezer overnight and it’s ready for use, keeping samples cold, but not frozen.
One side of the CoolCube will hold 36×1.5/2.0ml tubes. Flip it over, and you have a PCR workstation. This side holds one 96 well PCR plate (or 96×0.2ml tubes) and ten 1.5/2.0ml tubes.
CoolCube maintains temperature at approximately 0° C for up to four hours on the bench. -
BV101-E Vornado™ Mini Vortex Mixer, Gray Cup
Powerful is the best word to describe this mini vortexer.
With a 4m m orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full Extremely Compact lnsta-Touch111 Pressure Activation 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
lnsta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When
pressure is removed, operation immediately ceases.
The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors.
With a 4mm orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
Insta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases. The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors. -
BV101-B-E Vornado™ Mini Vortex Mixer, Blue Cup
Powerful is the best word to describe this mini vortexer.
With a 4m m orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full Extremely Compact lnsta-Touch111 Pressure Activation 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
lnsta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When
pressure is removed, operation immediately ceases.
The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors.
With a 4mm orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
Insta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases. The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors. -
BV101-G-E Vornado™ Mini Vortex Mixer, Green Cup
Powerful is the best word to describe this mini vortexer.
With a 4m m orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full Extremely Compact lnsta-Touch111 Pressure Activation 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
lnsta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases.
The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors.
With a 4mm orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
Insta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases. The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors. -
BV101-P-E Vornado™ Mini Vortex Mixer, Purple Cup
Powerful is the best word to describe this mini vortexer.
With a 4m m orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full Extremely Compact lnsta-Touch111 Pressure Activation 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
lnsta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases.
The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors.
With a 4mm orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
Insta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases. The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors. -
BV101-R-E Vornado™ Mini Vortex Mixer, Red Cup
Powerful is the best word to describe this mini vortexer.
With a 4m m orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full Extremely Compact lnsta-Touch111 Pressure Activation 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
lnsta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases.
The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors.
With a 4mm orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
Insta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases. The Vornado’s unique head design prevents liquids from entering the housing, prolonging motor life. The unit is available with five different cup head colors. -
P7700-CAR2 NextPette™ Carousel
NextPette Carousel Stand
-
P7700-20 NextPette™ Variable Volume Pipette, 2 to 20µl
Variable volume pipettor 20ul
-
V1002 Handheld vacuum controller with single channel adapters
Handheld vacuum controller with single channel adapters
-
P7700-10M NextPette™ Variable Volume Pipette, 1ml to 10ml
Variable volume pipettor 10,000ul
-
P7700-5M NextPette™ Variable Volume Pipette, 500µl to 5ml
Variable volume pipettor 5000ul
-
BV1000-E BenchMixer™ Vortexer mixer
The BenchMixer™ sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the BenchMixer provides smooth instant vortexing of even the largest sample sizes, including full 50ml tubes. The unique counter-balance system creates maximum vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation.Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls.
OPTIONAL ACCESSORIES:
•BV1000-COMBO Combination head, microplate and microtubes
•BV1000-FLAT 3 in. flat head
•BV1000-H15 1.5/2 ml tube head, horizontal
•BV1000-H150 15 ml tube head, horizontal
•BV1000 H500 50 ml tube head, horizontal -
H4000-H-E Benchmark Hotplate
Benchmark hotplates, stirrers and hotplate-stirrers feature an exceptionally durable, chemical resistant white ceramic work surface. Their space-efficient
design (8 X 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods.
Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of speed and temperature. Safety indicator LED’s on the front panel indicate when the heating and/or stirring functions have been activated. With a square 7.1 in work surface, all three models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. The hotplate/magnetic stirrer model (H4000-HS) comes complete with a support rod for mounting thermometers and temperature probes. -
H4000-S-E Benchmark Magnetic Stirrer
Benchmark hotplates, stirrers and hotplate-stirrers feature an exceptionally durable, chemical resistant white ceramic work surface. Their space-efficient
design (8 X 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods.
Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of speed and temperature. Safety indicator LED’s on the front panel indicate when the heating and/or stirring functions have been activated. With a square 7.1 in work surface, all three models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. The hotplate/magnetic stirrer model (H4000-HS) comes complete with a support rod for mounting thermometers and temperature probes. -
BSH200-E myBlock Mini Digital Dry Bath
With its compact construction, broad temperature range, and multiple block options, the myBlock Mini is the perfect tool for laboratory incubations. The simple touch pad controls and a digital display provide for “set and walk away†temperature selection and unrivaled accuracy.
While perfect for bench use, the optional 12V adapter expands the utility of the myBlock Mini to field use. At less than 4.3 inches wide, myBlock Mini is truly the first personal block incubator.
OPTIONAL ACCESSORIES:
•BSH100-02 0.2 ml tubes
•BSH100-05 0.5 ml tubes
•BSH100-1213 12/13mm diameter tubes
•BSH100-1232 2 ml autosampler vials
•BSH100-15 1.5 ml tubes
•BSH100-150 15 ml tubes
•BSH100-500 50 ml tubes
•BSH100-5MT 5 ml conical tubes
•BSH100-A12 12V Vehicle Adapter
•BSH100-CU Block, solid, for custom machining
•BSH100-CV Cuvettes -
H3770-S Benchmark Digital Magnetic Stirrer
Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Our space efficient 7 x 7-inch hotplate/stirrer series features a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant monitoring system provides precise control of temperature with rapid heating and faster boiling times. In addition, the powerful motor drive system ensures efficient mixing in larger and more viscous samples.
Temperature and mixing speed can be viewed on the large digital display and a safety LED illuminates when the top plate temperature exceeds 50°C. An external temperature probe can also be used for applications that require precise control of sample temperature. The probe provides direct feedback to the microprocessor with constant monitoring and adjustments for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels with up to 5 L maximum stirring volume. An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc. -
H3770-H-E Benchmark Digital Hotplate
Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Our space efficient 7 x 7-inch hotplate/stirrer series features a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant monitoring system provides precise control of temperature with rapid heating and faster boiling times. In addition, the powerful motor drive system ensures efficient mixing in larger and more viscous samples.
Temperature and mixing speed can be viewed on the large digital display and a safety LED illuminates when the top plate temperature exceeds 50°C. An external temperature probe can also be used for applications that require precise control of sample temperature. The probe provides direct feedback to the microprocessor with constant monitoring and adjustments for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels with up to 5 L maximum stirring volume. An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.
OPTIONAL ACCESSORY:
•H3770-CS Clamp assembly
•H3770-CSTF Clamp assembly with inert teflon probe
•H3770-ROD Support Rod
•H3770-TP -
BV1003-E BenchMixer V2, Vortex Mixer with flip top cup head
The BenchMixer™ V2 utilizes a smooth and powerful mixing technology similar to the original BenchMixer, with the advantage of a uniquely designed reversible rubber head that can be attached to the mixer in two orientations. For the vortexing of single tubes, the cupped surface would generally be preferred. However, for applications requiring a flat/dimpled surface for mixing uniquely shaped vessels (or a handful of multiple test-tubes), the head can easily be flipped over and reattached in reverse orientation.
Like the original BenchMixer, the drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation. With a maximum speed up to 3,200 rpm, the mixer provides an instant vortex of even the largest sample sizes, including full 50ml tubes.
OPTIONAL ACCESSORIES:
•BV1003-T150 15 ml tube head, vertical
•BV1003-T500 50 ml tube head, vertical
•BV1000-COMBO Combination head, microplate and microtubes
•BV1000-FLAT 3 in. flat head
•BV1000-H15 1.5/2 ml tube head, horizontal
•BV1000-H150 15 ml tube head, horizontal
•BV1000 H500 50 ml tube head, horizontal -
BV1005-E Mortexer™Â Vortex Mixer
The Mortexer™ is MORE than your standard vortex mixer. The unique design of the Multi-Head™ (included) features a traditional cup head for general purpose mixing, plus holds up to eight microcentrifuge tubes.
The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation. Increased speed, up to 3200 rpm produces an instant vortex of even the largest sample sizes, including full 50ml tubes.
Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls. Two year warranty. -
C1008-B-E MyFuge™ Mini Centrifuge, blue lid, with 2 rotors
The MyFuge™ Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. -
C1008-C-E MyFuge™ Mini Centrifuge, clear lid, with 2 rotors
The MyFuge™ Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. -
C1008-G-E MyFuge™ Mini Centrifuge, green lid, with 2 rotors
The MyFuge™ Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. -
C1008-P-E MyFuge™ Mini Centrifuge, purple lid, with 2 rotors
The MyFuge™ Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. -
C1008-R-E myFuge™ Mini Centrifuge, red lid
The MyFuge™ Mini centrifuge is a personal centrifuge that virtually fits in the palm of your hand. Ideal for quick spin downs of microtubes and PCR tubes, the MyFuge is extremely easy to use. Simply close the lid and the rotor instantly reaches 6,000 rpm. Open the lid, and the rotor quickly decelerates to a stop for removing samples.
An increased capacity, eight-position microtube rotor is included and comes installed. Also included is a second rotor for 0.2ml PCR tubes and strips which is stored (together with the rotor removal key) in a convenient compartment on the bottom of the centrifuge. When the rotor is not in use, storage in this compartment prevents loss or misplacement of the rotor. -
BactiZapper Family
The BactiZapper Infrared sterilizers use well-proven technology to provide instant sterilization of platinum inoculating loops, needles, glass tube/pipette mouths and various metal and borosilicate glass instruments used in the laboratory.
MODEL:
• B1000-E BactiZapper Classsic Research Microsterilizer
• B1001-E BactiZapper Tilt, microsterilizer with adjustable tilt angle
• B1001-XL-E BactiZapper Tilt XL, microsterilizer with adjustable angle tilt and larger mouth
OPTIONAL ACCESSORIES
• B100-01 Loop holder attachment
• B1000-03 Slide dryer attachment for 3 slides -
R2020-E RotoMini™ Tube Rotator, Fixed Speed
Benchmark™s new Roto-Mini series of rotating mixers provides a wide range of mixing capabilities, suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, histochemistry, hybridization etc. The mixers include interchangeable tube holders for accomomodating all common tube sizes from 0.5ml to 50ml. and the motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. Roto-Mini rotators are available in the “Plus†configuration. The Plus models provide the following additional features: Variable speed: 5 to 70rpm “Mix†function: Rotating in combination w/ oscillations (increased mixing) “Pause†function: Rotating with intermittent “stops†during rotation “Rock†function: Back and forth, gentle rocking motion (see-saw) The Plus models also offer an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2ml tube/strip/plate holder for mixing PCR vessels in the “Mix†(oscillating) mode
OPTIONAL ACCESSORIES:
•R2020-0507 5-7 ml tube holder
•R2020-150 10-15 ml tube holder
•R2020-1520 1.5/2 ml tube holder
•R2020-500 50 ml tube holder
•R2020-PCR 0.2 ml tube holder
•R2020-RP mini rocking platform
#revolver #rotator #mixer
-
M2100-E TubeRocker
The TubeRocker Mini is designed to provide the ideal speed and tilt angle (24 rpm / 30°) for agitation of sample tubes. The grooved design of the included rubber mat properly secures all tube sizes ranging from 1.5 to 50ml, without the use of added straps or bands.
There are no complicated controls, no settings or adjustments to be made; just press the power switch and let it rock.
Small in size (only 5 x 13 inches) and able to withstand temperatures from 4ºC to 65ºC, the TubeRocker Mini is small enough to fit on any lab bench and can conveniently be placed inside a cold room, refrigerator or laboratory incubator. -
H4000-HS-E Benchmark Hotplate Magnetic Stirrer
Benchmark hotplates, stirrers and hotplate-stirrers feature an exceptionally durable, chemical resistant white ceramic work surface. Their space-efficient
design (8 X 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods.
Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of speed and temperature. Safety indicator LED’s on the front panel indicate when the heating and/or stirring functions have been activated. With a square 7.1 in work surface, all three models are compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. The hotplate/magnetic stirrer model (H4000-HS) comes complete with a support rod for mounting thermometers and temperature probes. -
C1012-E MyFuge™12 Mini Centrifuge 100-240V (European 2 prong plug)
Unlike traditional mini centrifuges, the new MyFuge™ 12 eliminates the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor™ is all that is required for running 12 microtubes and/or 4 PCR strips.
With a fixed speed that produces 2,000 xg, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5500 rpm. Open the lid, and the rotor quickly decelerates for removal of samples.
At just 5.5 inches wide and less than 4.5 inches tall, the MyFuge 12 truly is a personal microcentrifuge with unmatched capacity and flexibilty. -
H3770-HS-E Benchmark Digital Hotplate Stirrer
Benchmark Scientific Hotplates and Stirrers provide reliable performance and safe operation for everyday laboratory use. Our space efficient 7 x 7-inch hotplate/stirrer series features a durable, chemical resistant white ceramic top plate and advanced microprocessor controls. The constant monitoring system provides precise control of temperature with rapid heating and faster boiling times. In addition, the powerful motor drive system ensures efficient mixing in larger and more viscous samples.
Temperature and mixing speed can be viewed on the large digital display and a safety LED illuminates when the top plate temperature exceeds 50°C. An external temperature probe can also be used for applications that require precise control of sample temperature. The probe provides direct feedback to the microprocessor with constant monitoring and adjustments for maintaining the selected temperature in the sample within +/- 1°C. All models are compatible with borosilicate glass beakers and other vessels with up to 5 L maximum stirring volume. An optional clamp assembly (H3770-CS) is available for mounting thermometers, temperature probes, etc.
OPTIONAL ACCESSORY:
•H3770-CS Clamp assembly
•H3770-CSTF Clamp assembly with inert teflon probe
•H3770-ROD Support Rod
•H3770-TP -
R2024-E Roto-Mini™ Plus Rotator, Variable Speed
Benchmark™s new Roto-Mini series of rotating mixers provides a wide range of mixing capabilities, suitable for an array of laboratory applications including resuspension, protein binding, nucleic acid purification, histochemistry, hybridization etc. The mixers include interchangeable tube holders for accomomodating all common tube sizes from 0.5ml to 50ml. and the motion can be adjusted from vertical (end over end) mixing, to horizontal (rolling or hybridization style) mixing. Roto-Mini rotators are available in the “Plus†configuration. The Plus models provide the following additional features: Variable speed: 5 to 70rpm “Mix†function: Rotating in combination w/ oscillations (increased mixing) “Pause†function: Rotating with intermittent “stops†during rotation “Rock†function: Back and forth, gentle rocking motion (see-saw) The Plus models also offer an additional rocking platform (4.5 x 3 in.), as well as a 96 x 0.2ml tube/strip/plate holder for mixing PCR vessels in the “Mix†(oscillating) mode
OPTIONAL ACCESSORIES:
•R2020-0507 5-7 ml tube holder
•R2020-150 10-15 ml tube holder
•R2020-1520 1.5/2 ml tube holder
•R2020-500 50 ml tube holder
•R2020-PCR 0.2 ml tube holder
•R2020-RP mini rocking platform
#revolver #rotator #mixer
-
B3D1020-E MiniMixer™ 3D Nutating Shaker, fixed speed 10″x7.5″ platform, dimpled mat, 230V
These multi-functional shakers provide a 3-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. Both models come standard with autoclavable dimpled mats while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has
24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. -
BSH200-HL-E myBlock™ HL Mini Dry Bath with Heated Lid
The new MyBlock™ HL is the first and only mini heat block featuring a heated lid for protecting samples against unwanted condensation and evaporation. Both the block and lid temperature can be selected independently in increments of 0.1°C, making this MyBlock the ideal choice for the most temperature sensitive applications, including immunoassays, LAMP assays, enzyme reactions & other temperature hyper-sensitive procedures.
OPTIONAL ACCESSORIES:
•BSH100-02 0.2 ml tubes
•BSH100-05 0.5 ml tubes
•BSH100-15HL 1.5 ml tubes, for heated lid -
B3D1008-E Mini BlotBoy™ 3D Rocker, fixed speed, small 10″x7.5″ platform with flat mat, 230V
Modeled after our popular BioMixer™ series of “nutating” shakers, these platform rockers provide the perfect 3-dimensional motion for all blot related applications. Their tilt angle and speed have been optimally set for gentle, but thorough mixing in gel trays, boxes and other flat vessels.
Mini BlotBoy™ and BlotBoy™ are supplied with autoclavable flat mats and are ideal for blot washes and gel staining/destaining. Both models have been designed to conserve bench space. The Mini BlotBoy is supplied with a 10.5 x 7.5 inch platform while the larger BlotBoy’s 12 x 12 inch platform expands the useable work surface by 80%.
The Mini BlotBoy and BlotBoy can accept stackable platforms and handle loads up to 2kg. Both have maintenance free brushless motors and are s afe for use in cold rooms and incubators.
OPTIONAL ACCESSORIES:
•B3D-DIMPLED Dimpled Mat
•B3D-FLAT Flat Mat
•B3D-STACK Stacking Platform
•B3D-STACK-D Stacking Platform, Dimpled